1.3. Acronym FNI FAS network interface
I Standard input port
PN Profinet
ECT EtherCAT
CCIEBS CC-Link IE Field Basic Slave
EIP Ethernet/IP
EMC Electromagnetic Compatibility
FE Functional ground
O Standard output port
1.5.Viewing angle deviation Product views and explanations in this manual m
ay deviate from the actual product. They are on
ly used left and right to explain the material.
2 Safety
2.1.Expected usage This manual describes as a decentralized input and output module
for connection to an industrial network.
---------------------------------------------------------------------------------------------------
2.2. Install and start Precautions!
Installation and start-up should only be carried out by trained an
d specialized personnel. A qualified individual is one who is famili
ar with the installation and operation of the product and has the
necessary qualifications to do so. Any damage caused by unautho
rized operation or illegal and improper use is not covered by the
manufacturer's warranty. Equipment operators are responsible for e
nsuring compliance with appropriate safety and accident preventio
n regulations.
------------------------------------------------------------------------------------------------
2.3. General security Debug and check
Notes Before debugging, you should read the contents of the user manu
al carefully.
The system cannot be used in applications where the safety of pe
sonnel depends on the functionality of the equipment.
intended use
The manufacturer's warranty coverage and limited liability statement
do not cover damage caused by:
· Unauthorized tampering
· Improper use
· Handling, installation and operation that do not conform to the
instructions provided in the user manual
Owner/Operator Obligations
This device is an EMC Class A compliant product. This device gen
