If you only see the PoE LED indicators keep being ON and OFF. Usually, this means the PoE switch can’t verify your IP
device, so it will refuse to release the power in order to protect whatever is in the front-end. Either the failed on
your IP device (including the IP device doesn’t comply with IEEE802.3af/at) or the failed on the cable could cause an
unsuccessful verification process.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the
manufacturer’s label. Connection to a different power source than those specified may result in improper operation,
damage to the equipment or pose a fire hazard if the limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified
service technician.
3. This equipment is provided with a detachable power cord which has an integral safety ground wire intended for
connection to a grounded safety outlet.
4. Do not substitute the power cord with one that is not the provided approved type. Never use an adapter plug to
connect to a 2‑wire outlet as this will defeat the continuity of the grounding wire.
5. The equipment requires the use of the ground wire as a part of the safety certification, modification or misuse
can trigger a shock hazard that can result in serious injury or death.
6. Contact a qualified electrician or the manufacturer if there are questions about the installation prior to
connecting the equipment.
7. Protective bonding must be installed in accordance with local national wiring rules and regulations.
Need More Help?
If you require more help setting up your PoE Powered Switch, please head to our help site where you will be able to
find the corresponding help guides and video tourist.
Visit our help site
fastcabling.com/support/
Declaration of Conformity
We. Fastcabling LTD., hereby declare that the products:
Fastcabling PoE Powered Switch
is in conformity with all the essential requirements of EMC Directive 2014/30/EU
Assessment of compliance of the product with the requirements relating to the following specifications:
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
EN 55032:2015+AC:2016 Class A
AS/NZS CISPR 32:2015 Class A
EN 61000-3-2:2014 Class A
EN 61000-3-3:2013
EN 55035:2017
