Fastjet A470 Series Bedienungsanleitung
Inkjet Printer
Operation
Manual
!
May 11th 2020 Edited V1.1
A470 Series
Content
1. Safety Guidelines 1------------------------------
1.1.Safety warning 1-------------------------------------------------------------
1.2.Safety prevention 1---------------------------------------------------------
1.3.Use 1---------------------------------------------------------------------------
1.4.Handling 2---------------------------------------------------------------------
1.5.Responsibility 2--------------------------------------------------------------
2. Instructions 3--------------------------------------
2.1.Specifications 3--------------------------------------------------------------
2.2.Appearance overview 4----------------------------------------------------
2.3.Control Panel 4--------------------------------------------------------------
2.4.Hydraulic diagram 5--------------------------------------------------------
2.5.Printhead 6--------------------------------------------------------------------
2.6.Ink Core 6---------------------------------------------------------------------
2.7.Main Screen 7----------------------------------------------------------------
2.8.Menu Analysis 8-------------------------------------------------------------
2.8.1.Messages 8----------------------------------------------------------------------
2.8.2.Editor 8----------------------------------------------------------------------------
2.8.3.User Fields 9---------------------------------------------------------------------
2.8.4.Print 10-----------------------------------------------------------------------------
2.8.5.Password 10---------------------------------------------------------------------
2.8.6.System 11-------------------------------------------------------------------------
2.8.7.Config 12--------------------------------------------------------------------------
2.8.8.Date 13----------------------------------------------------------------------------
3. Printer Operation 14-----------------------------
3.1.Commission 14--------------------------------------------------------------
3.2.Start The Printer 16---------------------------------------------------------
3.2.1.Start Jet 16------------------------------------------------------------------------
3.2.2.Inkjet Observation 17----------------------------------------------------------
3.2.3.Drops Observation 18---------------------------------------------------------
3.3.Stop Jet 19--------------------------------------------------------------------
3.3.1.Stop Jet and Clean 19---------------------------------------------------------
3.3.2.Stop&Clean (Power off during the inkjet running) 19------------------
3.3.3.Stop and Clean (long-term stop ) 19---------------------------------------
3.4.Create Message 20---------------------------------------------------------
3.4.1.Create a sample message 20-----------------------------------------------
3.5.Create/Edit User Field 22-------------------------------------------------
3.5.1.Time User Field 22--------------------------------------------------------------
3.5.2.Additional remarks for time user field 23---------------------------------
3.5.3.Barcode User Field 24---------------------------------------------------------
3.5.4.Additional remarks for Barcode User Field 25--------------------------
3.5.5.Counter User Field 26---------------------------------------------------------
3.5.6.Instructions for items in the Counter 27-----------------------------------
3.5.7.Logo User Field 28-------------------------------------------------------------
3.5.8 Code User Field 30------------------------------------------------------------
3.5.9 External data User Field 31--------------------------------------------------
3.6 Message Parameters 32---------------------------------------------------------
3.6.1 Modify message parameters 32--------------------------------------------
3.7 Print Mode Setting 33-------------------------------------------------------------
3.7.1 Single Printing Mode 33------------------------------------------------------
3.7.2 Continuous Printing Mode 34-----------------------------------------------
3.7.3 Times Printing Mode 35------------------------------------------------------
3.7.4 Measure mode 36--------------------------------------------------------------
3.7.5 Traverse Printing Mode 37---------------------------------------------------
4. Trouble Shooting and Maintenance 39----------
4.1 Diagnostic screen 39---------------------------------------------------------------
4.2 Faults and Warning Icons 40-----------------------------------------------------
4.2.1 Fault Icons 40--------------------------------------------------------------------
4.2.2 Warning Icons 41---------------------------------------------------------------
4.3 Troubleshooting 42-----------------------------------------------------------------
4.4 Wash Nozzle 43---------------------------------------------------------------------
4.5 Jet Alignment 43---------------------------------------------------------------------
4.6 Drain 44-------------------------------------------------------------------------------
4.7 Sensor and Encoder Wiring Diagram 45--------------------------------------
4.7.1 Sensor Diagram 45---------------------------------------------------------------
4.7.2 Encoder Diagram 45-------------------------------------------------------------
1. Safety Guidelines
1.1. Safety warning
•Maintenance of this equipment must be performed by a maintenance
professional.
•When the printer is connected to the power supply and related circuits, a
lethal voltage is generated. Non-professionals cannot open the circuit
compartment, and cannot check and repair the circuit system.
•The consumables used in the printer may be flammable liquids. The use of
consumables must not only follow the Material Safety Data Sheet (MSDS)
instructions, but also the printer must be regularly inspected and
maintained to minimize safety hazards. (Note: The printer has an alarm
function that has been sent for maintenance time. Please pay attention to
whether this function is normal. If there is an alarm when the printer
maintenance time has expired, please notify the service engineer in time.)
1.2. Safety prevention
•The installation of the printer should be stable and well grounded.
•The printer must be installed in a ventilated place, away from heat, fire and
static electricity. No smoking near the printer.
•The container lid of the ink, solvent and cleaning agent used in the printer
should be tightly closed and stored in a ventilated environment away from
the printer.
•The printer should be kept clean, because the consumables used may be
flammable liquids, and the ink can burn after drying.
•Place a carbon dioxide dry powder fire extinguisher near the printer.
1.3.Use
•The printer is a non-contact inkjet device and is not suitable for all
occasions (such as explosive atmospheres). It should be used in
accordance with safety guidelines and provide a suitable working
environment. Otherwise, the consequences will be borne by the user.
Page 1
•It is recommended to use the original consumables (including inks,
solvents, cleaning agents, maintenance products, etc.) of the printer. You
must obtain the Material Safety Data Sheet (MSDS) from the dealer and
read and follow them carefully. Otherwise the consequences will be borne
by the user.
•In operation, wear anti-ink gloves and safety glasses for those who may
touch the consumables.
1.4.Handling
•For machines with ink and solvent in the machine, non-vertical handling is
prohibited. If the printer cannot be kept in a vertical state, the ink and
solvent should be completely drain out before handling.
1.5.Responsibility
•Our company is not responsible for any consequences resulting from
violations of safety instructions, safety requirements and violations of basic
safety practices when using and maintaining the printer.!
!
Page 2
2. Instructions
2.1.Specifications
ELECTRICAL SPECIFICATIONS
Voltage
110V-240VAC
Frequency
50Hz-60Hz
Energy consumption
120（W）maximum value
WEIGHT
Net weight
22kg
DIMENSIONS
Cabinet
390L*295W*540H
Printhead diameter
41mm
Printhead length
260mm
Nozzle size
60um
Umbilical length
2700mm
ENVIRONMENT SPECIFICATIONS
Operating temperature
5℃to 45℃
Ambient temp replacing rate
10℃per hours at most
Relative humidity
0-90% non-frosting
Storage temperature
5℃-45℃Original package
Page 3
2.2. Appearance overview
Right View Front View Left View
Introduction ：
1. Upper: Electronics Compartment 、Control Panel
2. Lower: Ink Compartment
3. Connector Panel
4. Umbilical
2.3. Control Panel
!
Page 4
1
2
3
4
Shortcut keys
Diagnosis Screen
Input Method Switch
Indication LED
Cursor control
Confirm button
Delete button
2.4. Hydraulic diagram
1. When the valve is energized, I-O will open and I-N will close.
2. When the valve is de-energized, I-N will open and I-0 will close.
Main ink cycle ——
Consumable adding system ——
Viscosity detection system ——
Automatic cleaning system ——
Page 5
2.5.Printhead
2.6. Ink Core
Ink Core（Left View）Ink Core（Right View）
Deflection Plate
Nozzle
Charge Electrode
Gutter Pipe
Phase Detector
Last Chance Filter
Nozzle connector
Page 6
* Exhaust Air Switch
Condenser
Cover
Suction pipe
Drain Pipe
* Exhaust Vent Plug
* Please remove the exhaust vent plug and turn on
exhaust air switch before use.
Gear Pump
2.7.Main Screen
The main screen is the default screen after the printer powered on:
Instructions:
(1) Main Menus.
(2) Shortcut function keypad.
(3) The name and content of the current message, it’s a WYSIWYG
message viewer, the content of which is consistent with the content
printed by the printer.
(4) The current status description area of the printer.
(5) The printer icon display area contains icons such as consumables,
equipment status, warnings and faults.
(6) The counter of the cumulative number of prints can be reset;
Instructions of Shortcut function keypad:
•F1 Start Jet It is used to start the jet.
•F2 Select Message It is used to select and recall the stored messages.
•F3 Message Parameters It is used to set the message parameters.
•F4 Edit Message It is used to edit the current message.
Page 7
Inhaltsverzeichnis
Andere Fastjet Drucker Handbücher
