Always follow the principles of first aid in case of any injuries.
•When an electric shock is caused, it is necessary more than anywhere else to put emphasis on safety
and risk elimination for the rescuers. The affected person usually stays in contact with electrical
equipment (source of injury) because of muscle spasms caused by the electric shock. Traumatic
process continues in this case. It is therefore necessary to TURN THE POWER OFF FIRST using any
possible way. Subsequently CALL AN AMBULANCE or other professional service.
IN CASE OF FIRE:
•If the motor starts to burn or it the smoke appears from it, turn the product off, disconnect power
supply and move away to safety.
•To extinguish the fire, use suitable fire extinguisher (CO2, Dry Powder, halotron).
•DO NOT PANIC. Panic can cause even more damage.
RESIDUAL RISKS
Even if the product is used according to instructions, it's impossible to eliminate all the risks
associated with its operation. The following risks may occur arising from product construction:
Electrical hazard caused by touch with parts under high voltage (direct contact) or with parts,
which came under a high voltage due to failure of the product (indirect contact).
Heat hazard resulting in burning or scalding and other injuries caused by possible contact with high
temperature objects or materials including heat sources.
Dangers caused by contact with harmful liquids, gas, mist, smoke and dust or by their inhalation
(for example breathing in).
Dangers caused by failing in ergonomic principles by construction of the product, for example
dangers caused by unhealthy position of body or excessive overcharge and unnature to the
anatomy of the human hand-arm, relate to construction of handle, equilibrium of the product.
Dangers caused by unexpected starting, unexpected exceeding of engine revs caused by
defect/failure of control system, relate to the defects by the handle and placing of drivers.
Dangers caused by impossibility to stop the product in best conditions, relate to solidity of the
handle and placing of engine shut down product.
Dangers caused by defect of product control system, relate to solidity of the handle, placing of
drivers and marking.
Dangers caused by shooting up of subjects or splashing of liquids.
Mechanical hazard, caused by cut and throw off.
Noise risk resulting in loss of hearing (deafness) and other physiological disorders (e.g. loss of
balance, loss of consciousness).
Vibration risk (resulting in vascular and neurological harm in the hand-arm system, for example so
called "white finger disease")
WARNING!
The product produces an electromagnetic field of a very weak intensity. This field may interfere with
some pacemakers. To reduce the risk of serious or fatal injury, persons with pacemakers should consult
the use with their physician.
When over-current protection is not supplied, the user has to make provision for the installation of the over-current
protection of the power circuit. It must in accordance with the requirements of the norm EN60204-1. Ask advice to an
electrician.
Do not use this compressor in a potentially explosive atmosphere: there are risk serious accidents and fire.
High oil viscosity can arrive during cold start up, clogged oil filters or valve malfunction can result in oil starvation;
Openings shall be closed when the compressor is in operation.
Identify when the compressor unit is under automatic or remote control. Take necessary actions to prevent starting
automatically or from a remote position when the compressor is being serviced, maintained or inspected: lock the main
electrical isolator.
Risk of coke formation in the delivery piping causing a fire or explosion
