Fein BOP 6 Einrichtungshandbuch

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)

Repair instructions

C-SC_CSSM

Version 1.0

2017-10-12

FEIN retains all rights of disposal, such as copying and circulation.

Page 1of 65

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)

Contents

C-SC_CSSM

Version 1.0

2017-10-12

FEIN retains all rights of disposal, such as copying and circulation.

Page 2of 65

1. Models described

2. Technical data

3. Notes and requirements

4. Tools required

5. Lubricants and auxiliary substances required

6. Removal

7. Fitting

8. Troubleshooting

9. Connection diagram

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)

1. Models described

C-SC_CSSM

Version 1.0

2017-10-12

FEIN retains all rights of disposal, such as copying and circulation.

Page 3of 65

These repair instructions describe how to repair the following models:

Model Order number

BOP 6 (A) 7 205 52 .. .. .

BOP 10 (A) 7 205 53 .. .. .

BOP 10-2 (A) 7 205 54 .. .. .

BOP 13-2 (A) 7 205 55 .. .. .

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)

2. Technical data

C-SC_CSSM

Version 1.0

2017-10-12

FEIN retains all rights of disposal, such as copying and circulation.

Page 4of 65

Technical data

All the technical data can be found in the operating instructions for the model.

Test data

Up-to-date test data for all models can be found on the FEIN Extranet (Customer Service →Repair Guides).

Lubricants

The lubricants and container sizes available from FEIN can be found on the FEIN Extranet (Customer Service →Repair Guides).

Lists of spare parts

Lists of spare parts and exploded views are available online at www.fein.com

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)

3. Notes and requirements

C-SC_CSSM

Version 1.0

2017-10-12

FEIN retains all rights of disposal, such as copying and circulation.

Page 5of 65

Please note

These instructions are only intended for persons with suitable technical training. It is assumed that the reader has mechanical and

electrical training.

Only use original FEIN spare parts.

Provisions

Please note that power tools may only be repaired, maintained and checked by a trained electrician, as improper repair can result in

serious risks to the user.

The provisions set out in DIN VDE 0701-0702 should be observed after repairs.

The relevant accident prevention regulations of the employer’s liability insurance associations are to be observed when

commissioning.

The German Equipment and Product Safety Act [ProdSG] applies for correct use.

Outside Germany, the regulations applicable in the relevant country must be observed.

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)

4. Tools required

C-SC_CSSM

Version 1.0

2017-10-12

FEIN retains all rights of disposal, such as copying and circulation.

Page 6of 65

Standard tools Special tools

Open-ended spanner

(width = 4 mm) 17 mm Drawing-off socket cap 6 41 04 150 00 8

Socket head wrench 10 mm Chuck cone, 15 mm diameter 6 41 07 015 00 1

Arbor press Chuck cone, 19 mm diameter 6 41 07 019 00 7

Punch 7 mm diameter Assembly aid 6 41 22 121 01 0

Plastic hammer Assembly aid 6 41 31 017 00 0

Circlip pliers

Torx T20

Slotted screwdriver

Slotted screwdriver (small)

Combination pliers

Inner puller

Cross-tip screwdriver PH1; PH2

Forceps

Sleeve 33 mm inner diameter

43 mm inner diameter

13 mm inner diameter

17 mm inner diameter

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)

4. Tools required

C-SC_CSSM

Version 1.0

2017-10-12

FEIN retains all rights of disposal, such as copying and circulation.

Page 7of 65

Standard tools

Sleeve 30 mm inner diameter

40 mm inner diameter

12 mm inner diameter

30 mm inner diameter

20 mm inner diameter

28 mm inner diameter

55 mm inner diameter

65 mm inner diameter

7 mm inner diameter

17 mm inner diameter

8 mm inner diameter

19 mm inner diameter

20 mm inner diameter

27 mm inner diameter

6 mm inner diameter

20 mm inner diameter

12 mm inner diameter

15 mm inner diameter

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)

5. Lubricants and auxiliary substances required

C-SC_CSSM

Version 1.0

2017-10-12

FEIN retains all rights of disposal, such as copying and circulation.

Page 8of 65

Lubricants

BOP 6 (A)

Grease 0 40 101 0100 4 12 g Gearbox housing

BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)

Grease 0 40 101 0100 4 25 g Gearbox housing

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)

6. Removal

C-SC_CSSM

Version 1.0

2017-10-12

FEIN retains all rights of disposal, such as copying and circulation.

Page 9of 65

Removing the gearbox housing

1. Insert the socket head wrench into the quick-action chuck.

2. Turn the quick-action chuck (1) downwards.

3. Unscrew the three screws (2).

4. Remove the gearbox housing (3).

Tools:

- Socket head wrench

- Open-ended spanner,

17 mm (width = 4 mm)

- Torx T20

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)

6. Removal

C-SC_CSSM

Version 1.0

2017-10-12

FEIN retains all rights of disposal, such as copying and circulation.

Page 10 of 65

Removing the gearbox housing [applies to: BOP 6 (A)]

1. Pull off the grooved ball bearing (1).

2. Remove the circlip (2).

3. Remove the gear-wheel (3).

4. Remove the spring washer (4).

Tools:

- Drawing-off socket cap

- Chuck cone, 15 mm

- Circlip pliers

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fein Bohren Handbücher

Fein

Fein KBM 32Q Bedienungsanleitung

Fein

Fein ASCT18 Bedienungsanleitung

Fein

Fein ABS18 Q Bedienungsanleitung

Fein

Fein ABH 18 Series Bedienungsanleitung

Fein

Fein ASzxeu 636-1 Kinetik Bedienungsanleitung

Fein

Fein DSceu638 Bedienungsanleitung

Fein

Fein ASy 630 Bedienungsanleitung

Fein

Fein DSc 636 Bedienungsanleitung

Fein

Fein KBE30 Bedienungsanleitung

Fein

Fein ABS 18 Bedienungsanleitung

Fein

Fein MBS16X Bedienungsanleitung

Fein

Fein Slugger JHM Magforce X Bedienungsanleitung

Fein

Fein 7 270 27 Bedienungsanleitung

Fein

Fein AKBU 35 PMQ Series Bedienungsanleitung

Fein

Fein kbb38x Einrichtungshandbuch

Fein

Fein ASCM14 Bedienungsanleitung

Fein

Fein BOS 16 Einrichtungshandbuch

Fein

Fein KBE 32 QW Bedienungsanleitung

Fein

Fein ASCM18QM Series Bedienungsanleitung

Fein

Fein KBM80U Bedienungsanleitung

Fein

Fein Slugger JMU 137 QW Series Bedienungsanleitung

Fein

Fein KBM 65 U Bedienungsanleitung

Fein

Fein Handy Master ABS14 Bedienungsanleitung

Fein

Fein Slugger JME Holemaker III Bedienungsanleitung

Beliebte Bohren Handbücher anderer Marken

Makita

Makita BDF456 Bedienungsanleitung

Black & Decker

Black & Decker LDX220 Bedienungsanleitung

Hitachi

Hitachi DH 40MA Bedienungsanleitung

Challenge

Challenge JO Technisches Referenzhandbuch

Makita

Makita LXFD01 Bedienungsanleitung

Festool

Festool T18+3 Bedienungsanleitung

Milwaukee

Milwaukee M12 FPDX-202X Bedienungsanleitung

EINHELL

EINHELL TE-RH 32 E Bedienungsanleitung

Makita

Makita DHP484 Bedienungsanleitung

Makita

Makita FD05 Bedienungsanleitung

Bosch

Bosch PSB 530 RA Bedienungsanleitung

Maximum

Maximum 054-1359-4 Bedienungsanleitung

Makita

Makita HP332D Bedienungsanleitung

Raider

Raider RDP-HD31H Bedienungsanleitung

Bort

Bort BPM-1400x2 Bedienungsanleitung

Black & Decker

Black & Decker 7266 Bedienungsanleitung

KENT USA

KENT USA TRD1230 Bedienungsanleitung

Bosch

Bosch GSB 19-2 RE Bedienungsanleitung