SCT 5-40 M / SCT 5-40 UM
9
EN
Operating instructions for magazine holder.
Overview.
1 Magazine holder
Pus t e magazine older onto t e
screwdriver bit and position it as far as
t e stop on t e spindle collar of t e
drive mac ine.
2 Hand strap
For olding t e device firmly and less-
ening t e strain on t e and.
3 Torque adjusting screw (SCT 5-40 UM)
For setting t e torque.
4 Selector switch for clockwise and
anti-clockwise rotation
Select w en power tool is at a stand-
still.
5 Switch
For switc ing ON/OFF (a),
Lock for continuous mode (b).
For your safety.
Before using t is power tool, read
and comply wit :
t ese operating instructions,
t e operating instructions for t e
magazine older (document
number 3 41 01 044 06 5),
t e enclosed safety instructions (docu-
ment number 3 41 30 054 06 1),
t e relevant national industrial safety
regulations.
T ese operating instructions and t e
enclosed safety instructions s ould be
kept carefully for later use and enclosed
wit t e power tool, s ould it be passed
on or sold.
Intended use.
T is power tool is intended for:
commercial use in industry and trade,
for driving and removing screws, espe-
cially for use in drywall construction using
fast feed screws, self-drilling screws and
wooden screws,
for applications using t e accessories given
in t ese operating instructions, or t ose
recommended by FEIN.
Safety instructions.
Risk of injury
Hold t e power tool firmly.
Only work wit undamaged insert.
Beware of any concealed electric cables,
gas or water conduits; c eck t e working
area wit a metal detector, for example.
Do not rivet or screw any name-plates or
signs onto t e power tool. T e protective
insulation can t ereby be rendered inef-
fective. Ad esive labels are recom-
mended.
Only use an undamaged plug and cable.
Damage to property/material
T e mains voltage must correspond wit
t e voltage specifications on t e power
tool.
Personal protective equipment.
W en using t is power tool wear t e fol-
lowing protective items:
sturdy s oes, air net (for long air).
SCT 5-40 (U)M - Buch Seite 9 Mittwoch, 5. November 2003 10:37 10
