Fein ASCT 14 Einrichtungshandbuch
ASCT 14, 18 / 14U, 18U
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation. C-SC_CSSM 2012.09 1/48 Version 1
Repair instructions
ASCT 14, 18 / 14U, 18U
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation. C-SC_CSSM 2012.09 2/48 Version 1
1. Models described
2. Technical data
3. Provisions
4. Tools required
5. Lubricants and auxiliary substances required
6. Disassembly
7. Assembly
8. Troubleshooting
9. Connection diagram
Contents
ASCT 14, 18 / 14U, 18U
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation. C-SC_CSSM 2012.09 3/48 Version 1
These instructions describe how to repair the following models:
Model Order no.
ASCT 14 711314
ASCT 14U 711315
ASCT 18 711316
ASCT 18U 711317
1. Models described
ASCT 14, 18 / 14U, 18U
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation. C-SC_CSSM 2012.09 4/48 Version 1
2. Technical data
Technical data
The complete technical data can be found in the operating instructions for the model.
Test data
Up-to-date test data for all models can be found on the FEIN Extranet (Customer Service → Repair Guides).
Lubricants
The lubricants and container sizes available from FEIN can be found on the FEIN Extranet (Customer Service
→ Repair Guides).
Lists of spare parts
Lists of spare parts and exploded views are available online at www.fein.com
ASCT 14, 18 / 14U, 18U
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation. C-SC_CSSM 2012.09 5/48 Version 1
3. Provisions
Provisions
Please note that power tools may only be repaired, maintained and checked by a trained
electrician, as improper repair can result in serious risks to the user.
The provisions set out in DIN VDE 0701-0702 should be observed after repairs.
Only use original FEIN spare parts!
The relevant accident prevention regulations of the employers’ liability insurance associations are
to be observed when commissioning.
The German Equipment and Product SafetyAct applies for correct use.
Outside Germany, the regulations applicable in the relevant country must be observed!
ASCT 14, 18 / 14U, 18U
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation. C-SC_CSSM 2012.09 6/48 Version 1
4. Tools required
Standard tools
Torx 15 and 20 screwdrivers
Small slotted screwdriver
Arbor press
Plastic hammer
Open-ended spanner 27 mm
Cable hooks
Circlip pliers
Socket wrench 2.0 mm
Special tools
Unlocking tool
Arbor
Sleeve: Inner diameter 13 mm
Outer diameter 30 mm
Sleeve: Inner diameter 7 mm
Outer diameter 30 mm
Sleeve: Inner diameter 12 mm
Outer diameter 25 mm
Sleeve: Inner diameter 13 mm
Outer diameter 20 mm
Sleeve: Inner diameter 12 mm
Outer diameter 20 mm
Ball bearing support 30 mm
Ball bearing puller 19 mm 6 41 07 019 00 7
Ball bearing puller 28 mm 6 41 07 028 00 2
Drawing-off socket cap 6 41 04 150 00 8
Test board 6 41 340 0100 0
NOTE
You can only order special tools with an
order number from FEIN.
ASCT 14, 18 / 14U, 18U
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation. C-SC_CSSM 2012.09 7/48 Version 1
4. Tools required
Special tools
Unlocking tool
FEIN recommends using this unlocking tool because it is designed
precisely for the plug contact used.
Manufacturer no.: 1-1579007-6 (not available from FEIN)
Manufacturer: www.te.com
Price: approx. €40
ASCT 14, 18 / 14U, 18U
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation. C-SC_CSSM 2012.09 8/48 Version 1
5. Lubricants and auxiliary substances
required
Lubricants
ASCT 14, 18
Grease 0 40 121 0300 4 10 g Gearbox
Grease 0 40 106 0100 1 Plain bearing bush in intermediate bearing
ASCT 14U, 18U
Grease 0 40 101 0100 4 10 g Gearbox, roller bearing
ASCT 14, 18 / 14U, 18U
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation. C-SC_CSSM 2012.09 9/48 Version 1
6. Disassembly
1. Remove battery.
2. Remove screws from gearbox head.
3. Remove gearbox head.
Tool:
-Torx 20 screwdriver
ASCT 14, 18 / 14U, 18U
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation. C-SC_CSSM 2012.09 10/48 Version 1
1. Loosen screws on upper section of housing and remove.
2. Remove belt hooks.
6. Disassembly
Tool:
-Torx 15 screwdriver
Dieses Handbuch passt für folgende Modelle
7
Inhaltsverzeichnis
Andere Fein Elektrowerkzeuge Handbücher
Fein
Fein 7 129 36 64 09 0 Bedienungsanleitung
Fein
Fein ASM 12-9 Bedienungsanleitung
Fein
Fein SCW 16-6 Bedienungsanleitung
Fein
Fein ASs 648-1 Bedienungsanleitung
Fein
Fein AFMT12 Bedienungsanleitung
Fein
Fein MOtlx 6-25 Bedienungsanleitung
Fein
Fein ABLS18-1.6E Bedienungsanleitung
Fein
Fein KFH17-8 Series Bedienungsanleitung
Fein
Fein ABLK18-1.3TE Bedienungsanleitung
Fein
Fein ASAS18-21KAS Series Bedienungsanleitung
Fein
Fein AFMT12SL Bedienungsanleitung
Fein
Fein RSG Ex 1500 A Series Bedienungsanleitung
Fein
Fein MULTIMASTER FMM 250 Bedienungsanleitung
Fein
Fein MM700-1.7 Bedienungsanleitung
Fein
Fein AFMM 14 Einrichtungshandbuch
Fein
Fein MSxe 636 II Bedienungsanleitung
Fein
Fein AFSC18Q Bedienungsanleitung
Fein
Fein BLs 1.6 Bedienungsanleitung
Fein
Fein BLK1.3TE Bedienungsanleitung
Fein
Fein AFSC18Q Bedienungsanleitung
