Fellowes Voyager 125 Bedienungsanleitung

High-Performance Ofce Laminator

1789 Norwood Avenue, Itasca, Illinois 60143-1095 • USA • 630-893-1600

Voyager 125

Australia

Benelux

United Kingdom

United States

Canada

China

Deutschland

España

France

Italia

Japan

Korea

Polska

Singapore

fellowes.com

2009 Fellowes, Inc. Part No. 403916-2

High-Performance Ofce Laminator

1789 Norwood Avenue, Itasca, Illinois 60143-1095 • USA • 630-893-1600

Voyager 125

Australia

Benelux

United Kingdom

United States

Canada

China

Deutschland

España

France

Italia

Japan

Korea

Polska

Singapore

fellowes.com

2009 Fellowes, Inc. Part No. 403916-2

Please read these instructions before use.

Lire ces instructions avant utilisation.

Lea estas instrucciones antes del usarlo.

High-Performance Ofce Laminator

1789 Norwood Avenue, Itasca, Illinois 60143-1095 • USA • 630-893-1600

Voyager 125

Australia

Benelux

United Kingdom

United States

Canada

China

Deutschland

España

France

Italia

Japan

Korea

Polska

Singapore

fellowes.com

2009 Fellowes, Inc. Part No. 403916-2

LCD Display

Left

(-)

Right

(+)

Down

Standby

Reverse

5 sec

30 min

VOYAGER LAMINATOR

AutoLam - Automatic Lamination

Manual Lamination

EASY-ACCESS LOCKING SCREW

ATTENTION:

TOP COVER LOCKING SCREW MUST BE

REMOVED BEFORE THIS MACHINE CAN

BE OPENED.

Note: You will be unable to operate

the easy access feature to open the

machine for cleaning/maintenance

if the top lid locking screw (A) is not

removed ﬁrst.

Remove

this screw

ATTENTION:

LA VIS DE VERROUILLAGE DU COU-

VERCLE DOIT ÊTRE RETIRÉE AVANT DE

POUVOIR OUVRIR CET APPAREIL.

Remarque: Vous ne pourrez pas

activer la fonction d’accés facile

permettant d’ouvrir l’appareil pour

le nettoyage/entretien, si la vis de

verrouillage du couvercle (A) n’est pas

d’abord retirée.

ATENCIÓN:

ANTES DE ABRIR ESTA MAQUINA, DEBE

RETIRAR EL TORNILLO DE RETENCION

DE LA CUBIERTA SUPERIOR.

Nota: Si no retira el tornillo de reten-

ción de la tapa superior (A), no podrà

utilizar la función de acceso ràpido

para abrir la màquina y limpiarla o

realizarle mantenimiento.

LAMINATOR CONTROLS

QUICK START GUIDE

EFG

SETTING UP THE LAMINATOR

STEPS TO LAMINATE - AutoLam

1 2 3 4

5 6 7 8

9 10 11 12

CAPABILITIES

When laminating;

- plug the machine into an easily accessible main socket.

- to prevent electrical shock - do not use the appliance close to water, do not spill water on the appliance, power cord or main socket.

- When working with very small pouch sizes (less than 3” / 75mm long) place the pouch within a carrier or on a sheet of paper.

Performance

Entry width 12.5” / 317mm

Estimated heat-up time 4 minutes

Cool down time 30-60 minutes

Lamination speed variable - max. 35” / 90cm/min

Laminating mechanism Belt-drive

Ready indication Light & beep

Auto shut-off Yes (60 mins)

Photo-capable Yes

Carrier-free Yes

Technical Data

Voltage / Frequency / Current(Amps)

120V AC, 60Hz, 8.5A

Wattage 1100 Watts

Dimensions (WxDxH)

25” x 8.5” x 6.3” / 634 x 215 x 159mm

Net weight 22lb / 10 kg

Laminating capacity (max thickness) 0.04”

Max pouch thickness 10 Mil. / 250 micron

(total thickness = 2 x 10 = 20 Mil.)

DO ensure the machine is on a stable surface.

DO test laminate scrap sheets before ﬁnal laminations.

DO remove staples and other metal articles prior to laminating.

DO keep the machine away from heat and water sources.

DO turn off the machine after each use.

DO unplug the machine when not in use for an extended period.

DO use pouches designed for use at the appropriate settings.

DO keep away from pets, while in use.

DO only use Fellowes Roller Wipes (item #57037) for internal

cleaning.

DO NOT use appliance if the power cord is damaged.

DO NOT attempt to open or otherwise repair the machine

beyond the Easy-Access functions.

DO NOT exceed the machines quoted performance.

DO NOT allow children to use this machine without adult

supervision.

DO NOT laminate sharp or metal objects (eg: staples, paper

clips).

DO NOT laminate heat-sensitive documents (eg: tickets,

ultrasounds etc).

DO NOT laminate with self-adhesive pouches (which require a

cold setting).

DO NOT laminate an empty pouch.

DO NOT use sharp objects to clean laminator.

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

CAUTION: Please read before use and keep for future reference.

AutoLam laminating

Automatically senses the thickness of inserted

pouch and document and self-adjusts to optimal

laminating settings. The laminator defaults to

‘AutoLam’ setting if no other function is selected

within 5 seconds of switching it on.

Easy-Access open mechanism

The Easy-Access mechanism allows user to safely

and easily open the laminator for cleaning and

maintenance.

Auto Reverse function / overload protec-

tion

Reverses laminating process until the pouch

has been ejected from the machine in case of

misfeeds and overloads.

CleanMe glue sensor

Checks if glue or dirt is on the mechanism and

guides the user to clean the laminator.

HeatGuard™ technology

Keeps the laminator surface up to 50% cooler and

makes it more energy efﬁcient then comparable

laminators.

A Easy-Access opening cover G Selection buttons (up/down/left/right)

B Adjustable document entry guide H Select / OK button

C Entry support shelf I Detachable document exit tray

D Reverse button J On/off switch (at rear)

E Standby button K Carry points (at sides)

F LCD user interface

LAMINATOR CONTROLS

FEATURES & TIPS

CLEAN ME

SAFE TO TOUCH

FEATURES

• Always put item into the appropriate sized pouch.

• Do not laminate heat-sensitive documents (i.e. tickets,

ultrasounds etc...).

• Always test laminate with a similar size and thickness

before ﬁnal process.

• If required, trim excess material from around the item

after lamination and cooling.

• For best results, use Fellowes®brand laminating pouches:

Enhance 3 Mil, Capture 5 Mil, Protect 7 Mil, Preserve 10

Mil.

• When operating in manual mode it is recommended to start

ﬁrst with the thinnest pouches and lowest temperature.

The Auto shut-down switches the machine off if

it hasn’t been used for 60mins to save energy.

To return to the “Home” Menu at any stage,

press the “Left/back” key on the navigation

buttons.

The Entry Guide can be manually adjusted

(especially for smaller documents) to ensure

the items are best supported when inserted and

helps avoid mis-feeds.

If the service symbol shows in the LCD screen,

please call your service engineer or Fellowes

customer service.

TIPS

Switch the power on.

Select the ‘Standby’ button on the control panel, the

LCD Screen turns on. The LCD interface allows selection

of these functions:

- AutoLam - automatic laminating

- Manual laminating

- Open for maintenance

- Help information

The laminator will automatically start in AutoLam mode

and begin warm-up if no other setting is selected within

5 seconds.

The ‘Ready’ screen will show when warm-up is complete

and two short beeps indicate that machine is ready and

user can insert pouch. The AutoLam setting automati-

cally selects the optimum laminating settings for the

inserted item and pouch for best laminating results.

Place item into open pouch. Ensure it is centered against

the sealed edge.

Place the pouch, sealed edge ﬁrst, into the pouch /

document entry. Keep the pouch straight and use the

edge guide to center it.

Upon exit, the laminated pouch is hot and soft. Remove

the pouch immediately. Place pouch onto a ﬂat surface

to cool. This helps to prevent any jamming.

To reverse the laminating process at any stage, press

the ‘Reverse’ button to eject the item. The laminator will

beep while reversing.

STEPS TO LAMINATE - AutoLam

Let our experts help you with a solution. You’ll ﬁnd the numbers

for your nearest service center on the back cover of this manual.

Customer Service: www.fellowes.com

NEED HELP?

Ensure the machine is on a stable surface. Check that

there is enough clear space behind the machine to allow

items to pass through freely.

Connect the supplied power cord to the machine.

Plug the machine in to an easily accessible main socket.

To fully support pouches and items of different sizes

please use the adjustable entry guide to center the item

before laminating.

SETTING UP THE LAMINATOR

10.

11.

12.

On start menu, select “Manual”

operation within 5 seconds of

switching machine on.

STEPS TO LAMINATE - MANUAL OPERATION

Select pouch thickness

with navigation buttons as

required. Conﬁrm selection

with “OK” button.

The ‘Ready’ screen will show

when warm-up is complete and

two short beeps indicate that

machine is ready and user can

insert pouch.

Place the pouch, sealed edge ﬁrst,

into the pouch / document entry.

Keep the pouch straight and use the

edge guide to center it.

Upon exit, the laminated pouch is

hot and soft. Remove the pouch

immediately. Place pouch onto a ﬂat

surface to cool. This helps prevent

any jamming.

The warm-up screen will

show until operating

temperature is reached.

The Voyager laminator can be manually opened via the LCD user interface. Please note that the power supply needs to be ON

and the laminator needs to be SWITCHED ON to open.

MAINTENANCE - Easy-Access

Select ‘Open’ in the

start-up menu using the

navigating buttons and

conﬁrm the selection with

the ‘OK’ button.

The machine might

need to cool down if

it has already been

laminating, this can

take up to 30 minutes.

The “open” LCD screen

will show and a beep will

sound when the laminator

is ready to be opened.

Now move the lever

on each side of the

machine backwards to

open the top cover.

Open the cover with

both hands. When the

laminator is opened,

power to internal

parts is isolated so

that the user is not

in danger of electric

shock.

For further maintenance,

the internal mechanism

can be released by

experienced users. Pull

the cam levers forward

to release the mechanism

and lift it up.

To clean residue off the

laminator mechanism,

please only use

Fellowes Laminator

wipes (item No #

57037). Do not use

sharp objects to clean

laminator.

Please remember to

re-secure the mecha-

nism with the cam

levers again before

closing the cover.

To return to the “Home”

Menu at any stage, press

the “Left/back” key on the

navigation buttons.

CleanMe SYSTEM CHECK

The Help function displays in a simple pictorial sequence how to laminate with the Voyager laminator. For further help please

consult ‘Troubleshooting’ at the end of this user manual or contact Fellowes customer service.

HELP FUNCTION

To see how to laminate with the Voyager laminator select ‘Help’ in start-up menu with navigating

buttons and conﬁrm selection with OK (within 5 sec. of turning laminator on).

Fellowes warrants all parts of the laminator to be free of defects in material and workmanship for 2 years from the date of

purchase by the original consumer. If any part is found to be defective during warranty period, your sole and exclusive remedy

will be repair or replacement, at Fellowes’ option and expense, of the defective part. This warranty does not apply in cases of

abuse, mishandling or unauthorized repair. Any implied warranty, including that of merchantability or ﬁtness for particular

purpose, is hereby limited in duration to the appropriate warranty period set forth above. In no event shall Fellowes be liable for

any consequential or incidental damages attributable to this product. This warranty gives you speciﬁc legal rights. You may have

other legal rights that vary from this warranty. The duration, terms and conditions of this warranty are valid worldwide, except

where different limitations, restrictions or conditions may be required by local law. For more details or to obtain services under this

warranty, please contact Fellowes or your dealer.

WORLDWIDE WARRANTY

Thank you for purchasing a Fellowes product. Please visit www.fellowes.com/register to register your product and beneﬁt from

product news, feedback and offers. Product details can be found listed on the rating plate positioned on the rear side or underside

of the machine.

PRODUCT REGISTRATION

The CleanMe system check warns the user if glue or dirt has built up inside the laminator. Glue can build up inside every lamina-

tor, especially when low-quality laminating pouches are used. We recommend using Fellowes brand pouches to reduce the

amount of cleaning required and to get the best laminating quality.

The LCD screen will show the CleanMe sequence to guide you through the steps of the Cleaning process.

1. Warning sequence above shows that laminator needs cleaning. Machine might need to cool down if it has been laminat-

ing before. This can take up to 30 minutes.

2. Open the laminator as described in “Maintenance” on previous page.

3. To clean residue off laminator mechanism, please only use Fellowes Laminator wipes (item No # 57037). Do not use

sharp objects to clean laminator.

4. Please remember to re-secure the mechanism again before closing cover to ensure safe operation.

FUNCTION OVERVIEW

0 - 30 min

Secure mechanism and

close as described above

A) B) C)

Open - Easy-Access function

CleanMe - Maintenance

Overload protection - Auto Reverse

Help - Information display

Switch off the machine at the wall. Allow the machine to cool.

The outside of the machine can be cleaned with a damp cloth. Do not use solvents or ﬂammable materials to polish the machine.

Cleaning sheets can be used with the machine. When the machine is warm – run the sheets through the machine to clean any residue

off the rollers. For advanced Cleaning of the inside of the laminator, please see the section on the CleanMe function above. Use Fellowes

Laminator wipes (#57037) only for the internal cleaning.

Problem Possible cause Solution

No symbols showing in LCD screen Machine is not switched on Switch on machine at rear next to plug inlet

and at the wall socket, then press standby

button to left of LCD screen

Ready screen does not come on after a long

period Machine is in a hot or humid area Move the machine to a cooler and dry area

Pouch does not completely seal the item

Item may be too thick to laminate Pass through the machine again

Temperature setting may be incorrect (manual

operation)

Use AutoLam setting or check that pouch

thickness is correctly selected and pass

through again

Item comes out the front of laminator again Item too thick to laminate Choose thinner pouch and try again

Machine speed and noise varies during

lamination Items of different thickness laminated No problem – AutoLam automatically

senses the thickness of inserted pouch and

uses optimum settings

How to stop machine when laminating? Machine is laminating Press “Reverse” [ ] to exit pouch or

“Left” [ ] to return to “home” menu

screen

Pouch is lost in the machine Pouch is jammed Select reverse button and pull out the

item by hand or open laminator manually

via the LCD and follow steps described in

CleanMe

Jamming

Pouch was used ‘open end’ ﬁrst

Pouch was not centered & straight on entry

Empty pouch was used

Pouch is damaged after lamination Damaged rollers or adhesive on rollers Open laminator manually via the LCD and

follow steps described in CleanMe

Cannot open top cover to gain ‘Easy Access Top cover locking screw is still located on the left

side of the machine Remove the screw then open the lid as

advised

Small pouch is lost in machine Pouch may be too small to use without a carrier Select Easy Access, and open the machine.

Remove the pouch and laminate small

pouches with a carrier

STORAGE & EXTERNAL CLEANING

TROUBLESHOOTING

Andere Handbücher für Voyager 125

Inhaltsverzeichnis

Sprachen:

Andere Fellowes Laminiergerät Handbücher

Fellowes

Fellowes NEPTUNE 125 Bedienungsanleitung

Fellowes

Fellowes EXL 45-3 Bedienungsanleitung

Fellowes

Fellowes Spectra 95 Bedienungsanleitung

Fellowes

Fellowes Venus 125 Bedienungsanleitung

Fellowes

Fellowes EXL 125-2 Bedienungsanleitung

Fellowes

Fellowes Saturn SL 125 Bedienungsanleitung

Fellowes

Fellowes Neptun2 125 Bedienungsanleitung

Fellowes

Fellowes Voyager A3 Bedienungsanleitung

Fellowes

Fellowes Callisto 95 Bedienungsanleitung

Fellowes

Fellowes Calibre A3 Bedienungsanleitung

Fellowes

Fellowes Vega A3 Bedienungsanleitung

Fellowes

Fellowes Jupiter 2 A3 Bedienungsanleitung

Fellowes

Fellowes Neptune 3 Bedienungsanleitung

Fellowes

Fellowes SPL A4 Bedienungsanleitung

Fellowes

Fellowes L80-95 Bedienungsanleitung

Fellowes

Fellowes Venus 2 125 Bedienungsanleitung

Fellowes

Fellowes Voyager A3 Bedienungsanleitung

Fellowes

Fellowes Callisto 95 Bedienungsanleitung

Fellowes

Fellowes JUPITER A3 Bedienungsanleitung

Fellowes

Fellowes Cosmic 2 A3 Bedienungsanleitung

Fellowes

Fellowes Lunar A3 Bedienungsanleitung

Fellowes

Fellowes Voyager 125 Bedienungsanleitung

Fellowes

Fellowes JUPITER A3 Bedienungsanleitung

Fellowes

Fellowes A75-A4 Bedienungsanleitung

Beliebte Laminiergerät Handbücher anderer Marken

Renz

Renz HT 330 L Bedienungsanleitung

Gfp

Gfp 44TH Bedienungsanleitung

Lapis

Lapis Lamina006 Bedienungsanleitung

Hama

Hama L44B Bedienungsanleitung

PAVO

PAVO FLORIDA Bedienungsanleitung

M-Triangel

M-Triangel MT-102 Bedienungsanleitung

Akiles

Akiles PROLAM 230 Bedienungsanleitung

D&K

D&K Masterpiece 550 Bedienungsanleitung

Falcon

Falcon F-40 Bedienungsanleitung

LEITZ

LEITZ EasyLaminator A4 Bedienungsanleitung

LEITZ

LEITZ coldLAM CS9 Bedienungsanleitung

kala

kala Starter 1080 Bedienungsanleitung

Qomolangma

Qomolangma FMJ-1400-WA-PLUS Bedienungsanleitung

Opus

Opus Coverator 330 Bedienungsanleitung

ALDI

ALDI OL 250-L Bedienungsanleitung

Phoenix

Phoenix 2700-DH Bedienungsanleitung

acropaq

acropaq AL-3400 Bedienungsanleitung

Swingline

Swingline FUSION 5000L Bedienungsanleitung