Fellowes Voyager A3 Bedienungsanleitung

Ofﬁce Laminator

Voyager

Please read these instructions before use.

Lire ces instructions avant utilisation.

Lea estas instrucciones antes de usar la

máquina.

Diese Anleitungen vor Gebrauch genau

durchlesen.

Primo dell’uso, si raccomanda di leggere

questo manuale di istruzioni.

Lees deze instructies zorgvuldig door

voordat u de machine in gebruik neemt.

Läs dessa anvisningar innan du använder

apparaten.

Læs venligst denne vejledning før

anvendelse.

Lue nämä ohjeet ennen käyttöä.

Vennligst les nøye igjennom denne

bruksanvisningen før bruk.

Przed użyciem proszę zapoznać się z niniejszą

instrukcją.

Перед эксплуатацией устройства

ознакомьтесь с содержанием данной

инструкции.

Διαβάστε τις παρακάτω οδηγίες πριν από τη

χρήση.

Kullanmadan önce lutfen bu talimatlari

okuyen.

Pred použitím si pročtěte tyto pokyny.

Pred poużitím si prečítajte tieto pokyny.

Kérjük, hogy használat elött olvassa el az

utasításokat.

Leia estas instruções antes da utilização.

Моля, прочетете инструкциите преди

употреба.

Vă rugăm să citiţi instrucţiunile înainte de

utilizare.

Pažljivo pročitajte ove upute prije korištenja.

Pred uporabo izdelka preberite ta navodila

za uporabo.

Pročitajte ova uputstva pre upotrebe.

ȲƾƵƯƄŴǽȚǚƃŻȝȚȢƾŵȤȁȚǟƴŸȬǾŶǽȚǟűǍƁ

ĴĠĩĤĴğĤīįħğħěĵĠěĳĠğěĠĳĲħěī

ĞĤĵĭĜĨĦīĠĤĭħĠĳĩĴĥĤħĴğħĪĤě

VOYAGER LAMINATOR

LCD Display

Left

(-)

Right

(+)

Down

Standby

Reverse

5 sec

30 min

AutoSense - Automatic Lamination

Manual Lamination

LAMINATOR CONTROLS

QUICK START GUIDE

EFG

SETTING UP THE LAMINATOR

STEPS TO LAMINATE - AutoSense

1234

5678

9101112

CAPABILITIES

When laminating;

- plug the machine into an easily accessible mains socket.

- to prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or mains

socket.

Performance

Format A3

Entry width 317mm

Estimated heat-up time 4 minutes

Cool down time 30-60 minutes

Lamination speed variable - max. 90cm/min

Laminating mechanism Belt-drive

Ready indication Light & beep

AutoSense laminating Yes

Easi-Access open mechanism Yes

Auto Reverse function Yes

Overload protection Yes

CleanMe glue sensor Yes

HeatGuard™ technology Yes

Manual override of auto-functions Yes

Clear Path / Anti-jam engine Yes

Auto shut-off Yes (60 mins)

Photo-capable Yes

Carrier-free Yes

Technical Data

Voltage / Frequency /

Current(Amps) 220-240V AC, 50/60Hz, 5.0A

Wattage 1200 Watts

Dimensions (WxDxH) 634 x 215 x 159mm

Net weight 10 kg

Laminating capacity (max thickness) 1mm

Min pouch thickness 75 micron

(total thickness = 2 x 75 = 150 micron)

Max pouch thickness 250 micron

(total thickness = 2 x 250 = 500 micron)

DO ensure the machine is on a stable surface.

DO test laminate scrap sheets before ﬁnal laminations.

DO remove staples and other metal articles prior to laminating.

DO keep the machine away from heat and water sources.

DO turn off the machine after each use.

DO unplug the machine when not in use for an extended period.

DO use pouches designed for use at the appropriate settings.

DO keep away from pets, while in use.

DO only use Fellowes Roller Wipes (item #57037) for internal

cleaning.

DO NOT use appliance if the power cord is damaged.

DO NOT attempt to open or otherwise repair the machine

beyond the Easi-Access functions.

DO NOT exceed the machines quoted performance.

DO NOT allow minors to use this machine.

DO NOT laminate sharp or metal objects (eg: staples, paper

clips).

DO NOT laminate heat-sensitive documents (eg: tickets,

ultrasounds etc).

DO NOT laminate with self-adhesive pouches (which require a

cold setting).

DO NOT laminate an empty pouch.

DO NOT use sharp objects to clean laminator.

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

CAUTION: Please read before use and keep for future reference.

AutoSense laminating

Automatically senses the thickness of inserted

pouch and document and makes real-time adjust-

ments to always work under optimum laminating

conditions. The laminator defaults to ‘AutoSense’

setting if no other function is selected within

5 seconds of switching it on.

Easi-Access open mechanism

The Easi-Access mechanism allows to safely

and easily open the laminator for cleaning and

maintenance.

Auto Reverse function / overload protec-

tion

To eject the laminating pouch during use in case

of misfeeds or overloads. Reverses laminating

process until the pouch has been ejected from the

machine.

CleanMe glue sensor

Checks if glue or dirt is on the mechanism and

guides the user to clean the laminator.

HeatGuard™ technology

Keeps the laminator surface up to 50% cooler and

makes it more energy efﬁcient then comparable

laminators.

AEasi-Access opening cover G Selection buttons (up/down/left/right)

B Adjustable document entry guide H Select / OK button

C Entry support shelf I Detachable document exit tray

D Reverse button J On/off switch (at rear)

E Standby button K Carry points (at sides)

F LCD user interface

LAMINATOR CONTROLS

FEATURES & TIPS

CLEAN ME

SAFE TO TOUCH

FEATURES

t Always put item into the appropriate sized pouch.

t Always test laminate with a similar size and thickness

before ﬁnal process.

t If required, trim excess material from around the item

after lamination and cooling.

t For best results, use Fellowes®brand laminating pouches:

Enhance 80, Impress 100, Capture 125, Protect 175,

Preserve 250

t When working with different pouch thickness’ (tempera-

ture settings) it is recommended to start ﬁrst with the

thinnest pouches.

t Prepare pouch and item for lamination. Place item within

pouch centred and touching the leading sealed edge.

Ensure the pouch is not too large for the item.

t Please read these instructions before use.

The Auto shut-down switches the machine off if it

hasn’t been used for 30mins to save energy.

To return to the “Home” Menu at any stage, press

the “Left/back” key on the navigation buttons.

TIPS

Switch the power on (Power switch located at the rear

of the machine).

Select the ‘Standby’ button on the control panel. Check

the LCD Screen turns on. The LCD interface allows selec-

tion of these functions:

- AutoSense - automatic laminating

- Manual laminating

- Open for maintenance

- Help information

The laminator will automatically start in AutoSense

mode and begin warm-up if no other setting is selected

within 5 seconds.

The ‘Ready’ screen will show when warm-up is complete

and two short beeps indicate that machine is ready and

user can insert pouch. The AutoSense setting automati-

cally selects the optimum laminating settings for the

inserted item and pouch for best laminating results.

Place item into open pouch. Ensure it is centred against

the sealed edge. Use the appropriate pouch size for

the item.

Place the pouch, sealed edge ﬁrst, into the pouch /

document entry. Keep the pouch straight and central

within the document entry, not on an angle. Use the

entry markings as a guide.

Upon exit, the laminated pouch is hot and soft. Remove

the pouch immediately. Place pouch onto a ﬂat surface

to cool. This helps to prevent any jamming.

To reverse the laminating process at any stage, press

the ‘Reverse’ button to eject the item. The laminator will

beep whilst reversing.

STEPS TO LAMINATE - AutoSense

Let our experts help you with a solution.

Customer Service: www.fellowes.com

Help Line Europe: 00-800-1810-1810

NEED HELP?

Ensure the machine is on a stable surface. Check there

is enough clear space (min 50cm) behind the machine

to allow items to pass through freely.

Select the correct power lead for the appropriate power

supply. Fit the lead to the machine (the socket is at the

rear of the machine).

Plug the machine into an easily accessible mains socket.

Switch the mains supply on.

To fully support pouches and items of different sizes

please use the adjustable entry guide to centre the item

before laminating.

SETTING UP THE LAMINATOR

10.

11.

12.

Set up laminator as above. On

start menu, select “Manual”

operation within 5 seconds of

switching machine on.

STEPS TO LAMINATE - MANUAL OPERATION

Select pouch thickness

with navigation buttons as

required. Conﬁrm selection

with “OK” button.

The ‘Ready’ screen will show

when warm-up is complete and

two short beeps indicate that

machine is ready and user can

insert pouch.

Place the pouch, sealed edge ﬁrst,

into the pouch / document entry.

Keep the pouch straight and central

within the document entry, not on

an angle. Use the entry markings as

a guide.

Upon exit, the laminated pouch is

hot and soft. Remove the pouch

immediately. Place pouch onto a ﬂat

surface to cool. This helps prevent

any jamming.

The warm-up screen will

show until operating

temperature is reached.

The Voyager laminator can be manually opened via the LCD user interface. Please note that the power supply needs to be ON

and the laminator needs to be SWITCHED ON to open.

MAINTENANCE - Easi-Access

Select ‘Open’ in the

start-up menu using the

navigating buttons and

conﬁrm the selection with

the ‘OK’ button.

The machine might

need to cool down if

it has already been

laminating, this can

take up to 30 minutes.

The “open” LCD screen

will show and a beep will

sound when the laminator

is ready to be opened.

Now move the lever

on each side of the

machine backwards to

open the top cover.

Open the cover with

both hands. When the

laminator is opened,

power to internal

parts is isolated so

that the user is not

in danger of electric

shock.

For further maintenance,

the internal mechanism

can be released by

experienced users. Pull

the cam levers forward

to release the mechanism

and lift it up.

To clean residue off the

laminator mechanism,

please only use

Fellowes Laminator

wipes (item No #

57037). Do not use

sharp objects to clean

laminator.

Please remember to

re-secure the mecha-

nism with the cam

levers again before

closing the cover.

To return to the “Home”

Menu at any stage, press

the “Left/back” key on the

navigation buttons.

CleanMe SYSTEM CHECK

The Help function displays in a simple pictorial sequence how to laminate with the Voyager laminator. For further help please

consult ‘Troubleshooting’ at the end of this user manual or contact Fellowes customer service.

HELP FUNCTION

To see how to laminate with

the Voyager laminator select

‘Help’ in start-up menu with

navigating buttons and conﬁrm

selection with OK (within 5 sec.

of turning laminator on).

LCD screen will show simple pictorial sequence of how to laminate with the Voyager laminator in

the 3 operation modes in this sequence:

A) AutoSense mode

B) Manual mode

C) Refer to this user manual for further information

A) B) C)

An internal sensor automatically identiﬁes mis-feeds, items that are too thick or jams and reverses machine so items can be

taken out again. This screen sequence shows that inserted item was too thick for laminator.

AUTO REVERSE AND OVERLOAD PROTECTION

Item will be ejected out of the front of the laminator again to prevent jams and damage to item and laminator.

The CleanMe system check warns the user if glue or dirt has built up inside the laminator. Glue can build up inside every lamina-

tor, especially when low-cost laminating pouches are used. We recommend using Fellowes brand pouches to reduce the amount

of cleaning required and to get the best laminating quality.

The LCD screen will show the CleanMe sequence to guide you through the steps of the Cleaning process.

1. Warning sequence above shows that laminator needs cleaning. Machine might need to cool down if it has been

laminating before. This can take up to 30 minutes.

2. Open the laminator as described in “Maintenance” on previous page.

3. To clean residue off laminator mechanism, please only use Fellowes Laminator wipes (item No # 57037). Do not use

sharp objects to clean laminator.

4. Please remember to re-secure the mechanism again before closing cover to ensure safe operation.

The Voyager laminator has integrated carry points for safe and easy movement of the

laminator – push in the ﬂaps on both ends of the laminator to get to them.

INTEGRATED CARRY POINTS

The Entry Guide can be manually adjusted (especially for smaller documents) to ensure

the items are best supported when inserted and helps avoid mis-feeds.

ADJUSTABLE ENTRY GUIDE

Fellowes warrants all parts of the laminator to be free of defects in material and workmanship for 2 years from the date of

purchase by the original consumer. If any part is found to be defective during warranty period, your sale and exclusive remedy

will be repair or replacement, at Fellowes’ option and expense, of the defective part. This warranty does not apply in cases of

abuse, mishandling or unauthorised repair. Any implied warranty, including that of merchantability or ﬁtness for particular

purpose, is hereby limited in duration to the appropriate warranty period set forth above. In no event shall Fellowes be liable for

any consequential damages attributable to this product. This warranty gives you speciﬁc legal rights. You may have other legal

rights that vary from this warranty. The duration, terms and conditions of this warranty are valid worldwide, except where differ-

ent limitations, restrictions or conditions may be required by local law. For more details or to obtain services under this warranty,

please contact Fellowes or your dealer.

WORLDWIDE WARRANTY

Thank you for purchasing a Fellowes product. Please visit www.fellowes.com/register to register your product and beneﬁt from

product news, feedback and offers. Product details can be found listed on the rating plate positioned on the rear side or underside

of the machine.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or

refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.

You are also entitled to have the goods repaired or replaced if the goods fail to be acceptable quality and the failure does not

amount to a major failure.

PRODUCT REGISTRATION

FOR AUSTRALIA CUSTOMERS ONLY

If the service symbol shows in the LCD screen, please call your service engineer or Fellowes

customer service.

Customer Service: www.fellowes.com

Help Line Europe: 00-800-1810-1810 UK: +44-(0)-1302-836836

SERVICE

FUNCTION OVERVIEW

0 - 30 min

Secure mechanism and

close as described above

A) B) C)

Open - Easi-Access function

CleanMe - Maintenance

Overload protection - Auto Reverse

Help - Information display

Andere Handbücher für Voyager A3

Inhaltsverzeichnis

Sprachen:

Andere Fellowes Laminiergerät Handbücher

Fellowes

Fellowes saturn 3i A4 Bedienungsanleitung

Fellowes

Fellowes L80-95 Bedienungsanleitung

Fellowes

Fellowes Venus 2 125 Bedienungsanleitung

Fellowes

Fellowes Voyager A3 Bedienungsanleitung

Fellowes

Fellowes Neptune A3 Bedienungsanleitung

Fellowes

Fellowes Voyager A3 Bedienungsanleitung

Fellowes

Fellowes Jupiter 125 Bedienungsanleitung

Fellowes

Fellowes EXL 45-2 Bedienungsanleitung

Fellowes

Fellowes SATURN 3i 125 Bedienungsanleitung

Fellowes

Fellowes EXL 45-3 Bedienungsanleitung

Fellowes

Fellowes JUPITER A3 Bedienungsanleitung

Fellowes

Fellowes Jupiter 125 Bedienungsanleitung

Fellowes

Fellowes Saturn SL 125 Bedienungsanleitung

Fellowes

Fellowes Jupiter 125 Bedienungsanleitung

Fellowes

Fellowes Proteus A3/125 Betriebsanleitung

Fellowes

Fellowes Fellowes Saturn SL-95 Bedienungsanleitung

Fellowes

Fellowes Neptun2 125 Bedienungsanleitung

Fellowes

Fellowes Venus 125 Bedienungsanleitung

Fellowes

Fellowes Venus 2 125 Bedienungsanleitung

Fellowes

Fellowes Venus 2 A3 Bedienungsanleitung

Fellowes

Fellowes Venus A3 Bedienungsanleitung

Fellowes

Fellowes Jupites 125 Bedienungsanleitung

Fellowes

Fellowes Venus 125 Bedienungsanleitung

Fellowes

Fellowes CL125 Cosmic Bedienungsanleitung

Beliebte Laminiergerät Handbücher anderer Marken

Renz

Renz HT 330 L Bedienungsanleitung

Gfp

Gfp 44TH Bedienungsanleitung

Lapis

Lapis Lamina006 Bedienungsanleitung

Hama

Hama L44B Bedienungsanleitung

PAVO

PAVO FLORIDA Bedienungsanleitung

M-Triangel

M-Triangel MT-102 Bedienungsanleitung

Akiles

Akiles PROLAM 230 Bedienungsanleitung

D&K

D&K Masterpiece 550 Bedienungsanleitung

Falcon

Falcon F-40 Bedienungsanleitung

LEITZ

LEITZ EasyLaminator A4 Bedienungsanleitung

LEITZ

LEITZ coldLAM CS9 Bedienungsanleitung

kala

kala Starter 1080 Bedienungsanleitung

Qomolangma

Qomolangma FMJ-1400-WA-PLUS Bedienungsanleitung

Opus

Opus Coverator 330 Bedienungsanleitung

ALDI

ALDI OL 250-L Bedienungsanleitung

Phoenix

Phoenix 2700-DH Bedienungsanleitung

acropaq

acropaq AL-3400 Bedienungsanleitung

Swingline

Swingline FUSION 5000L Bedienungsanleitung