Fellowes Voyager A3 Bedienungsanleitung

1789 Norwood Avenue, Itasca, Illinois 60143-1095 • USA • 630-893-1600

Australia

Benelux

United Kingdom

United States

Canada

China

Deutschland

España

France

Italia

Japan

Korea

Polska

Singapore

fellowes.com

2008 Fellowes, Inc. Part No. 403916

Declaration of Conformity

Fellowes Manufacturing Company

Yorkshire Way, West Moor Park, Doncaster, South Yorkshire, DN3 3FB, England declares that the model Voyager A3 conforms

with the requirements of (RoHS) the Restriction of Hazardous Substances Directive 89/336/EEC. The Low Voltage Directive

72/73/EEC as amended by directive 92/68/EEC. The Electromagnetic Compatability Directive 89/336/EEC as amended by

directive 92/31/EEC & 96/68/EEC and the following Harmonised European Normes EN standards and IEC standards.

Information Technology Product: EN-60950-1 2001 / IEC-60950-1 2001

EMC: EN-55014-1 / A2 : 2002 EN-55014-2 / A1 : 2001 EN-61000-3-2 : 2000 EN-61000-3-3 / A1 : 2001

Itasca, Illinois, USA

March 2009 James Fellowes

Help Line

Europe 00-800-1810-1810

Fellowes

Australia +61-3-8336-9700

Benelux +31-(0)-76-523-2090

Canada +1-905-475-6320

Deutschland +49-(0)-5131-49770

España / Portugal + 34 902 33 55 69

France +33-(0)-1-30-6-86-80

Italia +39-71-730041

Japan +81-(0)-3-5496-2401

Korea +82-(0)-2-3462-2844

Malaysia +60-(0)-35122-1231

Polska +48-(22)-771-47-40

Russia +7-(495)-228-14-03

Singapore +65-6221-3811

United Kingdom +44-(0)-1302-836836

United States +1-630-893-1600

High-Performance Ofce Laminator

Voyager

Please read these instructions before use.

LCD Display

Left

(-)

Right

(+)

Down

Standby

Reverse

5 sec

30 min

Power Save mode

LCD off

VOYAGER LAMINATOR

AutoLam - Automatic Lamination

Manual Lamination

LAMINATOR CONTROLS

QUICK START GUIDE

EFG

SETTING UP THE LAMINATOR

STEPS TO LAMINATE - AutoLam

1 2 3 4

5 6 7 8

9 10 11 12

CAPABILITIES

When laminating;

- plug the machine into an easily accessible mains socket.

- to prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or mains

socket.

Performance

Format A3

Entry width 325mm

Estimated heat-up time 4 minutes

Cool down time 30-60 minutes

Lamination speed variable - max. 90cm/min

Laminating mechanism Belt-drive

Ready indication Light & beep

AutoLam laminating Yes

Easi-Access open mechanism Yes

Auto Reverse function Yes

Overload protection Yes

CleanMe glue sensor Yes

HeatGuard™ technology Yes

Manual override of auto-functions Yes

Clear Path / Anti-jam engine Yes

Auto shut-off Yes (30 mins)

Photo-capable Yes

Carrier-free Yes

Technical Data

Voltage / Frequency /

Current(Amps) 220-240V AC, 50/60Hz, 4.35A

Wattage 1000 Watts

Dimensions (WxDxH) 634 x 215 x 159mm

Net weight 8.5 kg

Laminating capacity (max thickness) 1mm

Min pouch thickness 75 micron

(total thickness = 2 x 75 = 150 micron)

Max pouch thickness 250 micron

(total thickness = 2 x 250 = 500 micron)

DO ensure the machine is on a stable surface.

DO test laminate scrap sheets before final laminations.

DO remove staples and other metal articles prior to laminating.

DO keep the machine away from heat and water sources.

DO turn off the machine after each use.

DO unplug the machine when not in use for an extended

period.

DO use pouches designed for use at the appropriate settings.

DO keep away from pets, while in use.

DO only use Fellowes Roller Wipes (item #57037) for internal

cleaning.

DO NOT use appliance if the power cord is damaged.

DO NOT attempt to open or otherwise repair the machine

beyond the Easi-Access functions.

DO NOT exceed the machines quoted performance.

DO NOT allow minors to use this machine.

DO NOT laminate sharp or metal objects (eg: staples, paper

clips).

DO NOT laminate heat-sensitive documents (eg: tickets,

ultrasounds etc).

DO NOT laminate with self-adhesive pouches (which require a

cold setting).

DO NOT laminate an empty pouch.

DO NOT use sharp objects to clean laminator.

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

CAUTION: Please read before use and keep for future reference.

AutoLam laminating

Automatically senses the thickness of inserted

pouch and document and makes real-time

adjustments to always work under optimum

laminating conditions. The laminator defaults to

‘AutoLam’ setting if no other function is selected

within 5 seconds of switching it on.

Easi-Access open mechanism

The Easi-Access mechanism allows to safely

and easily open the laminator for cleaning and

maintenance.

Auto Reverse function / overload protection

To eject the laminating pouch during use in case

of misfeeds or overloads. Reverses laminating

process until the pouch has been ejected from

the machine.

CleanMe glue sensor

Checks if glue or dirt is on the mechanism and

guides the user to clean the laminator.

HeatGuard™ technology

Keeps the laminator surface up to 50% cooler

and makes it more energy efficient then compa-

rable laminators.

A Easi-Access opening cover G Selection buttons (up/down/left/right)

B Adjustable document entry guide H Select / OK button

C Entry support shelf I Detachable document exit tray

D Reverse button J On/off switch (at rear)

E Standby button K Carry points (at sides)

F LCD user interface

LAMINATOR CONTROLS

FEATURES & TIPS

CLEAN ME

SAFE TO TOUCH

FEATURES

• Always put item into the appropriate sized pouch.

• Always test laminate with a similar size and thickness

before final process.

• If required, trim excess material from around the item

after lamination and cooling.

• For best results, use Fellowes®brand laminating pouches:

Enhance 80, Impress 100, Capture 125, Protect 175,

Preserve 250

• When working with different pouch thickness’ (tempera-

ture settings) it is recommended to start first with the

thinnest pouches.

• Prepare pouch and item for lamination. Place item within

pouch centred and touching the leading sealed edge.

Ensure the pouch is not too large for the item.

• Please read these instructions before use.

The Auto shut-down switches the machine off if it

hasn’t been used for 30mins to save energy.

To return to the “Home” Menu at any stage, press

the “Left/back” key on the navigation buttons.

TIPS

Switch the power on (Power switch located at the rear

of the machine).

Select the ‘Standby’ button on the control panel. Check

the LCD Screen turns on. The LCD interface allows

selection of these functions:

- AutoLam - automatic laminating

- Manual laminating

- Open for maintenance

- Help information

The laminator will automatically start in AutoLam

mode and begin warm-up if no other setting is selected

within 5 seconds.

The ‘Ready’ screen will show when warm-up is

complete and two short beeps indicate that machine is

ready and user can insert pouch. The AutoLam setting

automatically selects the optimum laminating settings

for the inserted item and pouch for best laminating

results.

Place item into open pouch. Ensure it is centred against

the sealed edge. Use the appropriate pouch size for

the item.

Place the pouch, sealed edge first, into the pouch /

document entry. Keep the pouch straight and central

within the document entry, not on an angle. Use the

entry markings as a guide.

Upon exit, the laminated pouch is hot and soft. Remove

the pouch immediately. Place pouch onto a flat surface

to cool. This helps to prevent any jamming.

To reverse the laminating process at any stage, press

the ‘Reverse’ button to eject the item. The laminator

will beep whilst reversing.

STEPS TO LAMINATE - AutoLam

Let our experts help you with a solution.

Customer Service: www.fellowes.com

Help Line Europe: 00-800-1810-1810

NEED HELP?

Ensure the machine is on a stable surface. Check there

is enough clear space (min 50cm) behind the machine

to allow items to pass through freely.

Select the correct power lead for the appropriate power

supply. Fit the lead to the machine (the socket is at the

rear of the machine).

Plug the machine into an easily accessible mains socket.

Switch the mains supply on.

To fully support pouches and items of different sizes

please use the adjustable entry guide to centre the item

before laminating.

SETTING UP THE LAMINATOR

10.

11.

12.

Set up laminator as above. On

start menu, select “Manual”

operation within 5 seconds of

switching machine on.

STEPS TO LAMINATE - MANUAL OPERATION

Select pouch thickness

with navigation buttons as

required. Confirm selection

with “OK” button.

The ‘Ready’ screen will show

when warm-up is complete and

two short beeps indicate that

machine is ready and user can

insert pouch.

Place the pouch, sealed edge first,

into the pouch / document entry.

Keep the pouch straight and central

within the document entry, not on

an angle. Use the entry markings

as a guide.

Upon exit, the laminated pouch

is hot and soft. Remove the pouch

immediately. Place pouch onto a flat

surface to cool. This helps prevent

any jamming.

The warm-up screen will

show until operating

temperature is reached.

The Voyager laminator can be manually opened via the LCD user interface. Please note that the power supply needs to be ON

and the laminator needs to be SWITCHED ON to open.

MAINTENANCE - Easi-Access

Select ‘Open’ in the

start-up menu using the

navigating buttons and

confirm the selection with

the ‘OK’ button.

The machine might

need to cool down if it

has already been lami-

nating, this can take

up to 30 minutes.

The “open” LCD screen

will show and a beep

will sound when the

laminator is ready to be

opened.

Now move the lever

on each side of the

machine backwards to

open the top cover.

Open the cover with

both hands. When the

laminator is opened,

power to internal

parts is isolated so

that the user is not

in danger of electric

shock.

For further maintenance,

the internal mechanism

can be released by

experienced users. Pull

the cam levers forward to

release the mechanism

and lift it up.

To clean residue off the

laminator mechanism,

please only use

Fellowes Laminator

wipes (item No #

57037). Do not use

sharp objects to clean

laminator.

Please remember to

re-secure the mecha-

nism with the cam

levers again before

closing the cover.

To return to the “Home”

Menu at any stage, press

the “Left/back” key on the

navigation buttons.

CleanMe SYSTEM CHECK

The Help function displays in a simple pictorial sequence how to laminate with the Voyager laminator. For further help please

consult ‘Troubleshooting’ at the end of this user manual or contact Fellowes customer service.

HELP FUNCTION

To see how to laminate with

the Voyager laminator select

‘Help’ in start-up menu with

navigating buttons and confirm

selection with OK (within 5 sec.

of turning laminator on).

LCD screen will show simple pictorial sequence of how to laminate with the Voyager laminator

in the 3 operation modes in this sequence:

A) AutoLam mode

B) Manual mode

C) Refer to this user manual for further information

A) B) C)

An internal sensor automatically identifies mis-feeds, items that are too thick or jams and reverses machine so items can be

taken out again. This screen sequence shows that inserted item was too thick for laminator.

AUTO REVERSE AND OVERLOAD PROTECTION

Item will be ejected out of the front of the laminator again to prevent jams and damage to item and laminator.

The CleanMe system check warns the user if glue or dirt has built up inside the laminator. Glue can build up inside every

laminator, especially when low-cost laminating pouches are used. We recommend using Fellowes brand pouches to reduce the

amount of cleaning required and to get the best laminating quality.

The LCD screen will show the CleanMe sequence to guide you through the steps of the Cleaning process.

1. Warning sequence above shows that laminator needs cleaning. Machine might need to cool down if it has been laminat-

ing before. This can take up to 30 minutes.

2. Open the laminator as described in “Maintenance” on previous page.

3. To clean residue off laminator mechanism, please only use Fellowes Laminator wipes (item No # 57037). Do not use

sharp objects to clean laminator.

4. Please remember to re-secure the mechanism again before closing cover to ensure safe operation.

The Voyager laminator has integrated carry points for safe and easy movement of the

laminator – push in the flaps on both ends of the laminator to get to them.

INTEGRATED CARRY POINTS

The Entry Guide can be manually adjusted (especially for smaller documents) to ensure

the items are best supported when inserted and helps avoid mis-feeds.

ADJUSTABLE ENTRY GUIDE

Fellowes warrants all parts of the laminator to be free of defects in material and workmanship for 2 years from the date of

purchase by the original consumer. If any part is found to be defective during warranty period, your sale and exclusive remedy will

be repair or replacement, at Fellowes’ option and expense, of the defective part. This warranty does not apply in cases of abuse,

mishandling or unauthorised repair. Any implied warranty, including that of merchantability or fitness for particular purpose,

is hereby limited in duration to the appropriate warranty period set forth above. In no event shall Fellowes be liable for any

consequential damages attributable to this product. This warranty gives you specific legal rights. You may have other legal rights

that vary from this warranty. The duration, terms and conditions of this warranty are valid worldwide, except where different

limitations, restrictions or conditions may be required by local law. For more details or to obtain services under this warranty,

please contact Fellowes or your dealer.

WORLDWIDE WARRANTY

Thank you for purchasing a Fellowes product. Please visit www.fellowes.com/register to register your product and benefit from

product news, feedback and offers. Product details can be found listed on the rating plate positioned on the rear side or underside

of the machine.

PRODUCT REGISTRATION

If the service symbol shows in the LCD screen, please call your service engineer or Fellowes

customer service.

Customer Service: www.fellowes.com

Help Line Europe: 00-800-1810-1810 UK: +44-(0)-1302-836836

SERVICE

Andere Handbücher für Voyager A3

Inhaltsverzeichnis

Andere Fellowes Laminiergerät Handbücher

Fellowes

Fellowes jupiter 2 125 Bedienungsanleitung

Fellowes

Fellowes Proteus A3/125 Betriebsanleitung

Fellowes

Fellowes Spectra 95 Bedienungsanleitung

Fellowes

Fellowes Neptune 3 125 Bedienungsanleitung

Fellowes

Fellowes Venus 2 125 Bedienungsanleitung

Fellowes

Fellowes Titan A3 Bedienungsanleitung

Fellowes

Fellowes Callisto 95 Bedienungsanleitung

Fellowes

Fellowes SATURN 3i 125 Bedienungsanleitung

Fellowes

Fellowes Venus 125 Bedienungsanleitung

Fellowes

Fellowes Neptune A3 Bedienungsanleitung

Fellowes

Fellowes Lunar+ A3 Bedienungsanleitung

Fellowes

Fellowes Mars 125 Bedienungsanleitung

Fellowes

Fellowes JUPITER A3 Bedienungsanleitung

Fellowes

Fellowes Venus 2 A3 Bedienungsanleitung

Fellowes

Fellowes Proteus A3 Bedienungsanleitung

Fellowes

Fellowes L80-95 Bedienungsanleitung

Fellowes

Fellowes Proteus A3 Bedienungsanleitung

Fellowes

Fellowes Jupiter 2 Bedienungsanleitung

Fellowes

Fellowes Neptune 3 Bedienungsanleitung

Fellowes

Fellowes Fellowes Saturn SL-95 Bedienungsanleitung

Fellowes

Fellowes Venus 2 Bedienungsanleitung

Fellowes

Fellowes SATURN 3i 95 Bedienungsanleitung

Fellowes

Fellowes Amaris A3 Bedienungsanleitung

Fellowes

Fellowes EXL 45-3 Bedienungsanleitung

Beliebte Laminiergerät Handbücher anderer Marken

Renz

Renz HT 330 L Bedienungsanleitung

Gfp

Gfp 44TH Bedienungsanleitung

Lapis

Lapis Lamina006 Bedienungsanleitung

Hama

Hama L44B Bedienungsanleitung

PAVO

PAVO FLORIDA Bedienungsanleitung

M-Triangel

M-Triangel MT-102 Bedienungsanleitung

Akiles

Akiles PROLAM 230 Bedienungsanleitung

D&K

D&K Masterpiece 550 Bedienungsanleitung

Falcon

Falcon F-40 Bedienungsanleitung

LEITZ

LEITZ EasyLaminator A4 Bedienungsanleitung

LEITZ

LEITZ coldLAM CS9 Bedienungsanleitung

kala

kala Starter 1080 Bedienungsanleitung

Qomolangma

Qomolangma FMJ-1400-WA-PLUS Bedienungsanleitung

Opus

Opus Coverator 330 Bedienungsanleitung

ALDI

ALDI OL 250-L Bedienungsanleitung

Phoenix

Phoenix 2700-DH Bedienungsanleitung

acropaq

acropaq AL-3400 Bedienungsanleitung

Swingline

Swingline FUSION 5000L Bedienungsanleitung