FENIX IMVICO TK-41 OPERATION MANUAL
5/88
FIGURES AND TABLES
Fig a. Head cleaning procedure--------------------------------------------------------------- 7
Fig. 1.1- Operating Temperature and Humidity Range -------------------------------- 11
Fig. 2.1- Fixing the TK41T --------------------------------------------------------------------- 12
Fig. 2.2- Fixing the TK41B --------------------------------------------------------------------- 13
Fig. 2.3- Accessible parts of the TK41T ---------------------------------------------------- 14
Fig. 2.4- Accessible parts of the TK41B ---------------------------------------------------- 15
Fig. 2.5- Paper-near-end sensor positions ------------------------------------------------ 15
Fig. 2.6- External chute system -------------------------------------------------------------- 16
Fig. 2.7- Paper guide system ----------------------------------------------------------------- 17
Fig. 2.8- Fixing holes of the TK41------------------------------------------------------------ 17
Fig. 2.9- TK41 connectors location ---------------------------------------------------------- 18
Fig. 2.10- Power supply connector as seen from outside the TK41 ---------------- 19
Fig. 2.11- RS-232 connector as seen from outside the TK41 ------------------------ 21
Fig. 2.12- CENTRONICS connector as seen from outside the TK41 -------------- 24
Fig. 2.13- Parallel input / output signal timing chart --- --------------------------------- 27
Fig. 3.1- Place the paper roll ------------------------------------------------------------------ 28
Fig. 3.2- Paper roll positioning ---------------------------------------------------------------- 28
Fig. 3.3- (1) Automatic paper load ----------------------------------------------------------- 29
Fig. 3.4- (2) Automatic paper load ----------------------------------------------------------- 29
Fig. 3.5- (1) Manual paper load -------------------------------------------------------------- 30
Fig. 3.6- (2) Manual paper load -------------------------------------------------------------- 30
Fig. 3.7- (3) Manual paper load -------------------------------------------------------------- 30
Fig. 3.8- TK41 Buttons & Leds identification --------------------------------------------- 33
Fig. 3.9- SELF-TEST MODE sample ------------------------------------------------------- 37
Fig. 3.10- PROGRAMMING MODE sample ---------------------------------------------- 39
Fig. 3.11- HEXADECIMAL DUMP MODE sample -------------------------------------- 40
Fig. 3.12- Serial port error detection flow chart -------------------------------------------49
Fig. 3.13- Parallel port error detection flow chart----------------------------------------- 50
Fig. 3.14- Optical Mark Characteristics ----------------------------------------------------- 51
Fig. 3.15- Optical Mark recommended use sequence --------------------------------- 53
Fig. 4.1- Code128 code example------------------------------------------------------------ 71
Fig. B.1- Printer mechanism. Front view --------------------------------------------------- 75
Fig. C.1- TK4160T/TK4180T external dimensions--------------------------------------- 76
Fig. C.2- TK4160B/TK4180B external dimensions--------------------------------------- 77
Table 2.1- Serial port pin-out ------------------------------------------------------------------ 21
Table 2.2- Serial interface connection example------------------------------------------ 22
Table 2.3- Parallel port pin-out --------------------------------------------------------------- 23
Table 2.4- Standard parallel connection example---------------------------------------- 25
Table 2.5- Special parallel connection example------------------------------------------ 26
Table 3.1- (1) PC437 character code table------------------------------------------------ 31
Table 3.2- (2) PC437 character code table------------------------------------------------ 32
Table 3.3- Errors explanation ----------------------------------------------------------------- 41
Table 3.4- Parallel Port Signals VS Type of error --------------------------------------- 41
Table 3.5- Parallel Port pins status at “NO PAPER / HEAD-UP” error ------------- 42
Table 3.6- Parallel Port pins status at “PAPER NEAR END” error ------------------ 43
Table 3.7- Parallel Port pins status at “HEAD TEMPERATURE” error ------------ 44
Table 3.8- Parallel Port pins status at “AUTOCUTTER” error ------------------------ 45
Table 3.9- Parallel Port pins status at “HEAD VOLTAGE” error --------------------- 46
Table 3.10- Parallel Port pins status at “HARDWARE” error ------------------------- 47
Table 3.11- Parallel Port pins status at “OPTICAL MARK” error -------------------- 48
Table 4.1- Command List ---------------------------------------------------------------------- 55
Table C.1- TK4160T / TK4180T different dimensions --------------------------------- 76
Table C.2- TK4160B / TK4180B different dimensions --------------------------------- 77
