Fenix HL30 Bedienungsanleitung

Fenix™ HL30

Fenix HL30 is a high-intensity headlamp equipped with two light sources. Featuring four distinct

brightness levels, HL30 is effective in a wide range of challenging lighting situations. It employs a

dual switch for quick output changes that include red light and SOS modes.

of up to 140hours and a max 40mthrowing distance. Featuring waterproofing to IPX-6 Standard and

the portable integrated design, Fenix HL30 must be able to ensure you a joyful and relaxing outdoor

experience in various conditions.

Technical Parameters

General Mode

ANSI/FSC

Turbo

High

Mid

Low

Red light

Mode

SOS

OUTPUT

200

LUMENS

100

LUMENS

—

LUMENS

RUNTIME

1h 40min

4h 30min

10h30min

140h

—

DISTANCE

40m

INTENSITY

475cd

IMPACT

RESISTANT

WATERPROOF

IPX-6(using a shower nozzle with a diameter of 12.5mm to spray water to the product for 3

minutes at a distance of 2.5~3m from the spray head (the flux is 100（1±5%）L/min)

EXTRA

FUNCTION

ACCESSORIES

headlamp strap, top headlamp strap, the mount of the top headlamp strap and spare o-ring

 Cree XP-G (R5) LED and Nichia red light (Nichia) LED, with a lifespan of 50,000 hours

respectively

 Uses two 1.5V AA (Ni-MH, Alkaline) batteries

 70mm (Length) x 55.7mm (Width) x 37.8mm (Height)

86.6-gram weight (excluding batteries and headlamp straps)

 Digitally regulated output maintains constant brightness

 Fast, convenient dual-button switch

 Reverse polarity protection guards against improper battery installation

 Made from durable aluminum alloy and performance plastic

Notice: The above-mentioned parameters (lab-tested with 2500mAh Ni-MH batteries) are approximate

and may vary between individual headlamps, batteries and environments.

Safety setting: Fenix HL30 will automatically downshift into the HIGH brightness level after running

continually for 5 minutes in TURBO. The rated runtime of the TURBO mode reflects this

pre-programmed shift to HIGH.

Operation Instruction

The button with the markisthepowerswitchbuttonandtheonewith markisthemode

switch button.

Press the power switch button to turn on the headlamp. Press it once to turn it off.

With the headlamp off

A single press on the mode switch button activates the red light mode;

 Press the mode switch button once again to turn the headlamp off;

A single press on the power switch button can change into the general mode.

With the headlamp on,

A single press on the mode switch button allows switching between:

Turbo→Low→Mid→High→brightness levels.

Press and hold the mode switch button for about one second to activate the red light mode.

Press and hold the mode switch button for about 3 seconds to activate the SOS mode.

While in red light or SOS mode, a single press on the mode switch button returns the HL30 to general

mode.

HL30 memorizes the brightness level, not the mode, while in the general mode. When turned off and

then on, the headlamp automatically enters the general mode.

Overheating protection: HL30 is a high-performance lighting system that can become hot to the touch

when operated for long periods at high brightness levels. To avoid overheating the headlamp, HL30

will downshift from TURBO to HIGH after five minutes of use. If TURBO is needed for extended

periods, simply reset it, recognizing heat build-up is probable.

Battery Specifications

Type

Dimensions

Nominal voltage

Usability

Ni-MH battery

1.2V

Recommended

√

Alkaline battery

1.5V

Usable

√

Non-rechargeable Battery

(Lithium)

1.5V

Usable

√

Rechargeable Battery

(Li-ion)

14500

3.7V

Banned

Battery replacement

Pull the headlamp bracket open as the arrow indicates till it is separated from the base as shown

above.

Hold back the protrusions on the back cover with your fingers (as “open”indicates), and then pull

the back cover open.

Insert the nominal batteries with the cathode side (－) toward the spring.

Put the two snap joints towardseach other, and then securely replace the cover before testing the

HL30’s power and functions.

Two snap joints

Assemble Headlamp Strap

Usage and Maintenance

 Please do not disassemble the sealed head, doing so can cause damage to the light and will void the

warranty.

 High-power light should use battery with high current discharge capability; we suggest using

high-performance Ni-MH rechargeable battery, using alkaline battery will decrease the runtime of this

high-intensity light.

 Please use batteries of high quality, and take out the battery if you do not use the light for a long

time, or the light can be damaged by electrolyte leakage or battery explosion which is caused by low

quality battery.

The o-ring may be worn out after using for a long time. If it happens, please replace the o-ring with a

new one to keep the light properly sealed against water.

 Please clean the contacts of your light from time to time, especially if the light flickers or doesn't

light up. There may be several reasons for a flickering or not working light:

Reason A: The batteries need replacing.

Solution: Replace the batteries (Please confirm the correct installation of anode and cathode).

Reason B: The threads, PCB board contact or other contacts are dirty.

Solution: Clean the contact points with an alcohol soaked cotton swab.

If the above methods don't work, please contact the distributors and refer to the warranty policy.

Headlamp strap without

pattern

Headlamp strap with

pattern

Top headlamp strap

with pattern

The mount of the

top headlamp strap

Notice: The routine cleaning video can be watched and downloaded through Fenix official website,

please log onto the service channel->'maintenance for light'.

Product Warranty

We will replace products afflicted with manufacturing defects within 15 days of purchase and repair a

light free of charge within 24 months of purchase if problems develop with normal use; if repair is

required after 24 months from the date of purchase, we will charge for parts. The total repair fee is

dictated by the cost of the replaced materials.

Warranty Card Registration

We kindly suggest that you register your guarantee card on the official website of Fenixlight Limited.

You can get an extra six-month warranty period once you have successfully registered. What's more,

you could take part in the lottery of questionnaire at the same time.

Warning

HL30 is a high-intensity lighting device and capable of causing eye damage, avoid shining the light

directly into the eyes.

Inhaltsverzeichnis

Andere Fenix Taschenlampe Handbücher

Fenix

Fenix UC30 2017 Bedienungsanleitung

Fenix

Fenix LD05 Bedienungsanleitung

Fenix

Fenix LR40R Bedienungsanleitung

Fenix

Fenix TK16 V2.0 Bedienungsanleitung

Fenix

Fenix TK15UE Bedienungsanleitung

Fenix

Fenix LR50R Bedienungsanleitung

Fenix

Fenix RC15 Bedienungsanleitung

Fenix

Fenix FD41 Bedienungsanleitung

Fenix

Fenix TK45 Bedienungsanleitung

Fenix

Fenix WT16R Betriebsanleitung

Fenix

Fenix PD32 Technisches Handbuch

Fenix

Fenix E05R Bedienungsanleitung

Fenix

Fenix LD10 Bedienungsanleitung

Fenix

Fenix TK35 Bedienungsanleitung

Fenix

Fenix TK32 Bedienungsanleitung

Fenix

Fenix TK75 Bedienungsanleitung

Fenix

Fenix E-SPARK Bedienungsanleitung

Fenix

Fenix PD22 Bedienungsanleitung

Fenix

Fenix LD03 Bedienungsanleitung

Fenix

Fenix LD32 UVC Bedienungsanleitung

Fenix

Fenix C7 Bedienungsanleitung

Fenix

Fenix TK70 Bedienungsanleitung

Fenix

Fenix TK65R Bedienungsanleitung

Fenix

Fenix E LITE Bedienungsanleitung

Beliebte Taschenlampe Handbücher anderer Marken

StreamLight

StreamLight PROPOLYMER 2AA Bedienungsanleitung

StreamLight

StreamLight Stinger Bedienungsanleitung

Silverline

Silverline 994024 Bedienungsanleitung

Gama Sonic

Gama Sonic 23i60065 Bedienungsanleitung

Ryobi

Ryobi RFL180M Bedienungsanleitung

RIB

RIB SPARK ACG7061 Bedienungsanleitung

Abicor Binzel

Abicor Binzel MB EVO PRO Series Bedienungsanleitung

PELI

PELI 7610 Bedienungsanleitung

Black & Decker

Black & Decker FSL18 Bedienungsanleitung

Black & Decker

Black & Decker 9506 Bedienungsanleitung

Berner

Berner 341709 Bedienungsanleitung

PELI

PELI 3415 Zone 0 Bedienungsanleitung

ADC

ADC Adlite Pro Wartungshandbuch

Fervi

Fervi 0338 Bedienungsanleitung

Milwaukee

Milwaukee M18 IL Bedienungsanleitung

Spectronics

Spectronics Spectroline LeakTracker SPI-LT Bedienungsanleitung

Larson Electronics

Larson Electronics SLEDB-110V-M Bedienungsanleitung

vulta

vulta hurricane 262 lumen fg-e15 Bedienungsanleitung