Festo Distributing Station Bedienungsanleitung

10/02

Distribution station

Assembly

Instructions

2 © Festo Didactic GmbH & Co. „ Distribution station

This station has been developed and produced exclusively for vocational and further

training in the field of automation and communication. The training authority and/or

the instructors are to ensure that trainees observe the safety instructions described

in the manual provided.

Festo Didactic herewith rules out all liability for damage or injury to trainees, the

training authority or other third parties which may occur during the use/operation of

this equipment other than purely in a training situation, unless it can be proved that

Festo Didactic has caused such damage or injury through malicious intent or gross

negligence.

Description

MONT.ANLEIT

Designation:

D:MP-MA-S-VERT-1-GB

Status:

11/2002

Author:

Frank Ebel

Graphics:

Doris Schwarzenberger, Albert Sigel

Layout:

11/2002

Internet: www.festo.com/didactic

e-mail: [email protected]m

The copying, distribution and utilisation of this document, as well as the communication of its contents

to others without the express authorisation of Festo Didactic is prohibited. Offenders will be held liable

or ornamental design registration

Intended use

1. Notes on safety__________________________________________________ 5

2. Short description ________________________________________________ 6

3. Views and tools _________________________________________________ 8

3.1 Views __________________________________________________________ 8

3.2 Tools___________________________________________________________ 9

4. Assembling the station __________________________________________ 10

4.1 Step 1_________________________________________________________ 10

4.2 Step 2_________________________________________________________ 11

4.3 Step 3_________________________________________________________ 12

4.4 Step 4_________________________________________________________ 13

4.5 Step 5_________________________________________________________ 14

4.6 Step 6_________________________________________________________ 15

4.7 Step 7_________________________________________________________ 17

4.8 Step 8_________________________________________________________ 18

4.9 Step 9_________________________________________________________ 19

Contents

4 © Festo Didactic GmbH & Co. „ Distribution station

In the interests of your own safety, please observe the following safety instructions:

General

Trainees must only work on a station under the supervision of an instructor.

Observe the data in the data sheets for the individual components, particularly

all safety instructions!

Electrical

Electrical connections are to be wired-up or disconnected only when the power

supply is turned off!

Use only extra-low-voltages of up to max. 24 V DC.

Pneumatic

Do not exceed the maximum permissible pressure of 8 bar (800 kPa).

Do not switch on the compressed air supply until you have established and

secured all tubing connections.

Do not disconnect air lines under pressure.

Particular care is to be taken when switching on the compressed air supply.

Cylinders may advance or retract as the compressed air is switched on.

Mechanical

Attach all components securely on the mounting plate.

No manual intervention is to take place unless the machine is at rest.

1. Notes on safety

6 © Festo Didactic GmbH & Co. „ Distribution station

View of the Distribution station

The Distribution station is a feed device. According to VDI 3240, feed devices are

defined as units which fulfill the function of bunkering, sorting and feeding of

components. In addition, feed devices can facilitate the sorting of components

according to various sorting characteristics (shape, weight etc. of the component).

The following are feed devices:

Magazines with feed limiting,

Vibratory bowl feeder,

Inclined conveyors and

Hoppers with sorting devices.

Workpieces handled by feed devices are

Electroplated parts,

Shaped parts made of plastic,

Punched parts and

Turned components.

2. Short description

Short description

The function fo the Distribution station is

to separate out workpieces from a magazine and

to transfer workpieces by means of a rotary drive using a suction cup.

The Distribution station consists of the following:

Stack magazine module

Changer module

Profile plate

Trolley

Control console

PLC board

8 © Festo Didactic GmbH & Co. „ Distribution station

Distribution station, plan view

Distribution station, r.h. side view

3. Views and tools

3.1

Views

Views and tools

Distribution station, front view

Tube spanner, 9 x 10 mm

Open-ended spanners 6 x 7, 12 x 13, 22 x 24 mm

Slot-head screwdriver, 3.5 mm

Allen key, 5 mm

3.2

Required tools

10 © Festo Didactic GmbH & Co. „ Distribution station

10.

11.

12.

13.

14. Nut

Profile plate

4. Assembling the station

4.1

Step 1

Andere Handbücher für Distributing Station

Inhaltsverzeichnis

Andere Festo Industrieanlagen Handbücher

Festo

Festo EXCM-30 -PF Series Bedienungsanleitung

Festo

Festo DGE-25-ZR-KF Einrichtungshandbuch

Festo

Festo DAMS-K-V1-40-V-R3 Bedienungsanleitung

Festo

Festo 696688 Bedienungsanleitung

Festo

Festo ELGR series Bedienungsanleitung

Festo

Festo DHEB Series Bedienungsanleitung

Festo

Festo SLE-KF-A Series Bedienungsanleitung

Festo

Festo VABF-S4-1-V2B1 series Bedienungsanleitung

Festo

Festo EPCC-BS-KF Bedienungsanleitung

Festo

Festo EADC-E12 Bedienungsanleitung

Festo

Festo Distributing Station Bedienungsanleitung

Festo

Festo KSK Series Bedienungsanleitung

Festo

Festo STAF- -P-A-K Series Bedienungsanleitung

Festo

Festo YXML Bedienungsanleitung

Festo

Festo CTEU-VN Bedienungsanleitung

Festo

Festo DHPS Bedienungsanleitung

Festo

Festo EPCC-BS-25 Bedienungsanleitung

Festo

Festo EHPS-16 Stücklistenhandbuch

Festo

Festo PVGA Series Bedienungsanleitung

Festo

Festo KSK Series Bedienungsanleitung

Festo

Festo EduTrainer 8040011 Bedienungsanleitung

Festo

Festo Pick&Place Station Bedienungsanleitung

Festo

Festo HGDD Bedienungsanleitung

Festo

Festo DPA-***-A Series Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung