Fiat Freemont Bedienungsanleitung
FREEMONT
Quick guide to Repairs
FREEMONT
Contents
Contents
1. Vehicle identification data
2. Electrical system
2.1 Engine compartment fuse box
2.2 Dashboard
2.3 Battery positive terminal wiring
2.4 Battery negative terminal wiring
3. Emergency procedures
3.1 Jump starting
4. Interventions with flat battery
4.1 Automatic transmission - gear lever unlocking
5. Vehicle towing/lifting
5.1 Towing attachment points
5.2 General warnings for towing
5.3 Vehicle lifting points
6. Technical specifications
6.1 Tyre pressure (bar)
6.2 Fluids
FREEMONT
Vehicle identification data
Chassis number
The chassis number (VIN) is indicated in the front left corner of the
dashboard and can be seen from the outside the vehicle through the
windscreen. This number is also printed on the kick plate of the front
right door under the moulding and appears on the car information
label on one of the car windows, on the registration document and
the ownership certificate.
1. Vehicle identification data
VIN position Printed VIN position
FREEMONT
Electrical system
2.1 Engine compartment fuse box
2. Electrical system
User Fuse Ampere
Internal guide of power distribution junction unit F101 60 A
Internal guide of power distribution junction unit F102 60 A
Internal guide of power distribution junction unit F103 60 A
Run/start relay on internal guide of power distribution junction unit F105 60 A
Accessories/run relay, central guide of power distribution junction unit F106 60 A
Climate control system fan F139 40 A
Door central locking F140 30 A
ABS F141 40 A
Heater plugs – For versions/markets, where provided F142 40 A
Exterior lights 1 F143 40 A
Exterior lights 2 F144 40 A
Body computer – Bulb F145 30 A
Reserve F146 30 A
Reserve F147 30 A
Radiator fan motor F148 40 A
Starter solenoid F149 30 A
Power unit control modules F150 25 A (mini)
Headlight washer motor – For versions/markets, where provided F151 30 A
Diesel heater – For versions/markets where provided F152 25 A (mini)
Supply pump F153 20 A (mini)
Braking/stability electronic control module F156 10 A (mini)
Transfer case module – For versions/markets, where provided F157 10 A (mini)
Active bonnet module – For versions/markets, where provided F158 10 A (mini)
Reserve F159 10 A (mini)
Passenger compartment lights F160 20 A (mini)
Horn F161 20 A (mini)
Passenger compartment heater 1/Vacuum pump – For versions/markets where provided F162 50 A
Passenger compartment heater 2 – For versions/markets where provided F163 50 A
Power unit automatic switching-off F164 25 A (mini)
FREEMONT
Electrical system
Power unit switching-off F165 20 A (mini)
Reserve F166 20 A (mini)
Power unit switching-off F167 30 A (mini)
Air conditioning clutch F168 10 A (mini)
Emissions – Partial zero emissions vehicle actuators F170 15 A (mini)
Reserve F172 20 A (mini)
Anti-lock braking valves F173 25 A (mini)
Siren – For versions/markets where provided F174 20 A (mini)
Reserve F175 30 A (mini)
Power unit control modules F176 10 A (mini)
All-wheel-drive module – For versions/markets, where provided F177 20 A (mini)
Sun roof– for versions/markets, where provided F178 25 A (mini)
Battery sensor F179 10 A (mini)
Electro-hydraulic power steering – For versions/markets, where provided F181 100 A
Passenger compartment heater 3 - For versions/markets where provided F182 50 A
Front windscreen wiper motor F184 30 A
User Fuse Ampere
FREEMONT
Electrical system
2.2 Dashboard
The fuse panel in the passenger compartment is located on the
passenger side, under the dashboard.
User Fuse Ampere
110 V AC inverter – For versions/markets, where provided F100 30 A
Passenger compartment lights F101 10 A (mini)
Cigar lighter in the dashboard/rear left supply socket F102 20 A (mini)
Supply socket in the storage compartment/ supply socket in the rear part of the console F103 20 A (mini)
Heated seats – For versions/markets, where provided F105 20 A (mini)
Rear power socket F106 20 A (mini)
Rear camera – For versions/markets, where provided F107 10 A (mini)
Dashboard F108 15 A (mini)
Climate/HVAC control F109 10 A (mini)
Protection systems control unit F110 10 A (mini)
Reserve F112 10 A (mini)
Rear HVAC motor/fan F114 20 A (mini)
Rear window wiper motor F115 20 A (mini)
Heated rear window (EBL) F116 30 A
Heated mirrors F117 10 A (mini)
Protection systems control unit F118 10 A (mini)
Steering column control module F119 10 A (mini)
All-wheel-drive – For versions/markets, where provided F120 10 A (mini)
Wireless ignition unit F121 15 A (mini)
Driver side door module F122 25 A (mini)
Passenger side door module F123 25 A (mini)
Courtesy and door mirrors F124 10 A (mini)
Steering column control module F125 10 A (mini)
Audio amplifier F126 10 A (mini)
Tow ring – For versions/markets, where provided F127 20 A (mini)
Radio F128 15 A (mini)
DVD video – For versions/markets, where provided F129 15 A (mini)
Climate control/dashboard F130 15 A (mini)
Parking assistance system/hands-free communication - For versions/markets, where provided F131 10 A (mini)
Tyre inflation pressure module F132 10 A (mini)
Reserve F133 10 A (mini)
FREEMONT
Electrical system
2.3 Battery positive terminal wiring
2.4 Battery negative terminal wiring
Component code Name
A001 BATTERY
B001 ENGINE COMPARTMENT JUNCTION UNIT
Component code Name
A005 TERMINAL BOX
FREEMONT
Emergency procedures
3.1 Jump starting
If the battery is flat, it is possible to start the engine using an auxiliary
battery with the same capacity or a little higher than the flat one.
IMPORTANT:
Never jump start the engine by pushing, towing or driving downhill.
In the event of emergency starting, the battery dummy poles for
remote starting are available on the left side of the engine
compartment.
1. Positive dummy pole (+) for remote starting (covered with
protective cap)
2. Negative dummy pole (-) for remote starting.
- Apply the parking brake, take the automatic transmission to P
(Park), or engage a gear on manual gearbox and ignition switch
to OFF.
- Turn off the heater, the radio and all unnecessary electrical
devices.
- Remove the protective cover above the positive dummy pole
(+) of the remote starting battery.
- To remove the cover, press the tab with the retaining clip and
pull the cover upwards.
- Connect one end of the cable used for positive (+) to the
positive dummy pole (+) of the car with flat battery.
3. Emergency procedures
FREEMONT
Emergency procedures
- Connect the other end of the cable used for positive (+) to the
positive terminal (+) of the auxiliary battery.
- Connect one end of the cable used for negative (-) to the
negative terminal (-) of the auxiliary battery.
- Connect the other end of the cable used for negative (-) to the
negative dummy pole (-) of the car with flat battery.
WARNING
Do not connect the cable to the negative terminal (-) of the flat
battery. The following spark could lead to battery explosion and
cause serious harm. Only use the specific earth point; do not use
any other exposed metallic part.
- Start the engine of the car with an auxiliary battery, let it run for
some minutes at idle and then start the engine of the car with
flat battery.
Once the engine is started, remove the cables used as a jumper
in the reverse sequence:
- Disconnect the end of the cable used for negative (-) from the
negative dummy pole (-) of the car with flat battery.
- Disconnect the other end of the cable used for negative
(-) from the negative terminal (-) of the auxiliary battery.
- Disconnect the end of the cable used for positive (+) to the
positive terminal (+) of the auxiliary battery.
- Disconnect one end of the cable used for positive (+) from the
positive dummy pole (+) of the car with flat battery.
- Refit the protective cover on the positive dummy pole (+) of the
battery for remote starting of the car with flat battery.
FREEMONT
Interventions with flat battery
4.1 Automatic transmission - gear lever unlocking
If, in the event of a failure, the gear lever cannot be moved from
position P (Park), the following procedure can be used to
temporarily move the gear lever.
- Switch off the engine.
- Fully engage the parking brake.
- Open the central tunnel and remove the access cover for the
gear lever release device located in the front area, in the lower
right angle, of the tunnel storage compartment.
- Keep the brake pedal fully depressed.
- Insert a screwdriver or a similar small tool in the access hole,
for keeping the release lever pressed forwards.
- Place the gear lever in N (neutral) position.
- At this point, the car can be started in N (neutral).
- Refit the access cover for the gear lever release.
4. Interventions with flat battery
Andere Handbücher für Freemont
3
Inhaltsverzeichnis
Andere Fiat Automobil Handbücher
Fiat
Fiat Ducato Benutzerhandbuch
Fiat
Fiat 500 ABARTH 2017 Bedienungsanleitung
Fiat
Fiat 500 Abarth Benutzerhandbuch
Fiat
Fiat Ducato Bedienungsanleitung
Fiat
Fiat 500L2018 Bedienungsanleitung
Fiat
Fiat BLUE&ME 2012 500c Bedienungsanleitung
Fiat
Fiat Freemont Benutzerhandbuch
Fiat
Fiat 1986 Panda Van Benutzerhandbuch
Fiat
Fiat 1986 Panda Van Bedienungsanleitung
Fiat
Fiat 2016 500X Bedienungsanleitung
Fiat
Fiat Croma Bedienungsanleitung
Fiat
Fiat 500L 2020 Bedienungsanleitung
Fiat
Fiat 500 2016 Bedienungsanleitung
Fiat
Fiat Panda 2015 Benutzerhandbuch
Fiat
Fiat 1995 Bravo Bedienungsanleitung
Fiat
Fiat Panda 100HP Bedienungsanleitung
Fiat
Fiat Blue&Me 2012 500 Abarth Bedienungsanleitung
Fiat
Fiat Project X1/9 Bedienungsanleitung
Fiat
Fiat 124 Spider Abarth 2018 Bedienungsanleitung
Fiat
Fiat 2016 500X Bedienungsanleitung
