Fidelity Measurement CSa Bedienungsanleitung
CSa
Advance Wireless Crane Scale
Operation Manual (Full Version)
PLEASE READ THIS MANUAL VERY CAREFULLY
BEFORE OPERATING THIS INSTRUMENT
Specifications subject to change without prior notice
V100 Feb 2018
2
3
Content
Content...............................................................................................................3
1. Installation ......................................................................................................7
Cautions.........................................................................................................7
1.1 Metrological Legislation ...........................................................................7
1.2 Seal & Serial Number ..............................................................................7
1.3 Warm Up Time .........................................................................................7
1.4 Unpacking ................................................................................................8
1.5 Securing the Scale...................................................................................8
1.6 Support & Service ....................................................................................8
2. Specifications .................................................................................................9
3. Keys, Display & Connection Points..............................................................10
3.1 Keys & Display on Instrument................................................................11
3.2 Keys & Display on Remote Controller ...................................................12
4. Power & Battery Recharging........................................................................13
4.1 Power Adaptor .......................................................................................13
4.2 Built-In Rechargeable Battery................................................................13
5. Initial Setup...................................................................................................13
5.1 Internal Functions & Settings.................................................................13
5.2 How to Enter & Select Internal Function................................................13
5.3 IR Remote Controller Key Function under Internal Function Mode.......14
5.4 Internal Function Table...........................................................................15
5.5 Weight Unit Conversion .........................................................................18
5.6 Auxiliary Function Modes.......................................................................19
5.7. Auto Power Off......................................................................................19
5.8 Display Brightness .................................................................................19
5.9 Keyboard Lock .......................................................................................19
6. Basic Operations..........................................................................................20
4
6.1 Power On / Off Instrument .....................................................................20
6.2 Power On Countdown Sequence & Inputting Operator Number ...........20
6.3 Set Weight to Zero when Unloaded.......................................................20
6.4 Tare Modes ............................................................................................20
6.4.1 Manual Tare .....................................................................................20
6.4.2 Auto & Continuous Tare (F12) .........................................................21
6.4.3 Manual Repetitive Tare (F13) ..........................................................21
6.4.4 Preset Tare (F63) ............................................................................21
6.5 Select the Preferred Function Mode ......................................................22
6.6 Weight Units...........................................................................................22
6.7 Memory Accumulation ...........................................................................22
6.7.1 Automatic Accumulation...................................................................23
6.7.2 Manual Accumulation.......................................................................23
6.7.3 When data is accumulated to memory ..........................................23
6.7.4 Memory recall and clearance...........................................................23
7. Weighing Mode ............................................................................................24
8. Peak Hold Mode...........................................................................................25
9. Animal Weighing Mode ................................................................................25
9.1 Description of Animal Weighing Mode ...................................................25
9.2 Basic Animal Weighing Settings ............................................................25
9.3 Start using Animal Weighing..................................................................26
10. Wireless Communication ...........................................................................26
10.1 Default Settings of Built-in Bluetooth & WIFI Module ..........................26
10.2 Default Settings of Built-in WIFI Module..............................................27
10.3 Comport Setting Procedures ...............................................................27
10.3.1 When comport is set as PC ...........................................................28
10.3.2 When comport is set as CMD ........................................................28
10.3.3 When comport is set as Manual ....................................................29
10.3.4 When comport is set as Auto (Auto 1~3) .......................................31
10.3.5 When Comport 1 is set as Scanner ...............................................33
5
11. Customer & Product Code .........................................................................33
11.1 Enter a Customer & Product Code Manually.......................................34
11.2 Enter a Customer & Product Code by Scanner ...................................35
11.3 Clear a Customer & Product Code Entered.........................................35
11.4 Print a Customer & Product Code Entered ..........................................35
12. Enter a Key Command by Scanner ...........................................................36
13. Communication & Outputs .........................................................................36
13.1 PC Output Protocol ..............................................................................36
13.2 Sending Keyboard Commands from Computer...................................36
13.3 Requesting Operation Results & System Parameters by Computer...37
14. Printing Formats.........................................................................................37
14.1 Lab 1 Print Format ...............................................................................37
14.2 Standard Lab 2 Print Format ...............................................................38
14.3 Customizing Lab 2 Print Format ..........................................................39
14.3.1 Print output format variants table...................................................39
14.3.2 To edit custom Lab 2 print output format .......................................40
14.4 Lab 3 Data Base Output Format..........................................................41
14.5 Lab 4 Print Format ...............................................................................42
14.6 Lab 5 Print Format ...............................................................................43
15. Label Printing .............................................................................................44
15.1 Label Format Groups & Label File Names ..........................................44
15.1.1 FL1 (Label Format Group 1) ..........................................................44
15.1.2 FL2 (Label Format Group 2) ..........................................................45
15.2 Label Programming .............................................................................45
15.2.1 Label programing information table ...............................................46
15.2.2 Label programming sample ...........................................................48
16. Built-in Battery & Recharging .....................................................................49
16.1 Battery Operation Time........................................................................49
16.2 Battery Low Signal ...............................................................................49
6
16.3 Battery Charging Status.......................................................................49
17. Error Codes ................................................................................................50
18. Daily Care & Maintenance .........................................................................51
19. Downloading Appendix A to E ....................................................................51
Appendix A: - Keyboard Commands................................................................52
Appendix B: - PC Output Protocols..................................................................53
Appendix C: - Operation Result Commands....................................................57
Appendix D: - System Parameter Inquiry Commands .....................................59
Appendix E: - TSC Printer Installation & Setup Procedures ............................68
E.1 Before Installation..................................................................................68
E.1.1 Printer Installation...............................................................................68
E.1.2 Uploading TCF File to Printer .............................................................69
Appendix F: - Create & Upload Label to TSC Printer ......................................70
F.1 Selecting the Correct Edition for Bartender Software ............................70
F.2 Adding Information from Instrument to Label & Uploading to a TSC
Printer...........................................................................................................70
7
1. Installation
Cautions
a. Dangerous! Do not perform overhead weighing / operation with this
instrument. Always stand clear of this instrument and weighed
subject during weighing operation.
b. Do not overload this instrument.
c. The instrument is not an explosion proof device.
d. The instrument is not a water proof device.
e. Do not open the instrument, no user serviceable parts inside.
Always contact your dealer for service.
f. Do not place this instrument in where shock, excessive vibration or
extremes of temperature (before or after installation) exist.
1.1 Metrological Legislation
Because of metrological legislation, some metrological parameter settings are
limited to be done by authorized personnel only. Do not attempt to change any
parameters under internal function number F60 ~ F99. Contact your dealer for
installation and technical assistance.
1.2 Seal & Serial Number
This instrument is legal for trade only when it is sealed (and/or stamped) and
bearing a serial number. Do not attempt to break the seal (or stamp) or serial
number affixed to this instrument. No warranty service will be provided if the seal
(or stamp) or data plate affixed to this instrument is damaged or removed.
Always contact your dealer for after sales service.
1.3 Warm Up Time
Allow warm up period of not less than 60 seconds before calibration and
usage. The higher the setup resolution of the scale, the longer the warm
up period is required.
In most cases, 60 seconds is a safe warm up period for all applications.
This warm up period is needed to energy all components to reach a stable
status.
8
1.4 Unpacking
Unpack this instrument very carefully. Check and make sure that the following
items are included: -
a. This operation manual x 1
b. Crane scale x 1
c. Battery Charger x 1
d. Infrared Remote Controller x 1
Contract your dealer if any items are missed.
1.5 Securing the Scale
a. This instrument must be hanged via a strong media, e.g. a wire rope
or a metal hook, to a firm support that can withstand at least 5 times of
the maximum capacity of this instrument.
b. Make sure that this instrument is hanged vertically.
c. Avoid using this instrument in any environment where excessive wind
flow, vibration and extreme temperature change exist.
1.6 Support & Service
Always contact your dealer for product information, after sales service and
questions when in doubt.
9
2. Specifications
10
3. Keys, Display & Connection Points
Inhaltsverzeichnis
Andere Fidelity Measurement Skala Handbücher
