www.
fi
delix.com
Operation:
Start the unit by connecting the power.
The unit’s LEDs are activated for 1-3 minutes flashing a red/green sequence before changing to a fixed light for 10 minutes.
Fixed green light = functioning
Red light = malfunctioning
Description of the LEDs:
The LEDs indicate that the installation is correct as well as confirm that the unit is functioning correctly during its whole lifespan.
The unit has three red and green LEDs. The LEDs are visible through the cover and thus can be seen without opening the unit.
In normal operation, these LEDs are unlit and can be activated by placing a magnet (such as a fridge magnet) on the upper corner
of the unit or by pressing the LED button. After the unit is connected, the LEDs light up for 10 minutes before going out. The LEDs
give information about the status of the unit.
In general, a green light indicates a functioning unit, a red light indicates a fault and a
flashing green/red light indicates that the status is not yet available. An unlit LED means
that the function is inactive e.g. a unit configured for 4G/5G will have an unlit Ethernet
light.
LED indicators:
LED Explanation Visual
Green light Fully functional
Red light Fault
Flashing green/red Status unavailable - wait
Inspection:
Fault Cause Action
The unit’s lights are out. The unit’s lights go out automatically
after 10 minutes.
The unit has no supply voltage.
Place a fridge magnet or similar on the
unit’s upper left corner or activate the
LEDs by pressing the LED button. Check
electrical connection.
The unit’s lights don’t come on when
activated with a magnet.
The magnet is too weak.
The unit has no supply voltage.
Activate the LEDs with the push button.
Check electrical connection.
The unit’s lights don’t come on when
activated with the push button.
The unit has no supply voltage. Check electrical connection.
The unit’s lights don’t go out after 10
minutes.
The unit is mounted on a non-continu-
ous power supply e.g. lighting.
The unit has recently updated its soft-
ware.
Check that the unit is connected to a
continuous power supply.
Units installed with 4G/5G or EGPRS
GPRS light changes to a red light. SIM card missing.
Poor or no 4G/5G coverage.
Check that the unit has a SIM card
installed.
Move the unit to a place with better
coverage.
GPRS light is green, but status is red. No contact with server. Contact the service provider.
Units installed with Ethernet
Ethernet light is red Ethernet link missing. Check the Ethernet cable.
Ethernet light is flashing red No IP address received from DHCP.
Unit configured incorrectly.
Check the connection to the DHCP
server. Contact IT operator.
Change the installation to a static IP.
Ethernet light is green but status is red. No internet connection.
Missing connection to server.
Contact IT operator.
Contact the service provider.
Disposal of product and packaging:
The product’s packaging can be disposed of as corrugated cardboard according to the relevant regulations.
After use, the product is classified as electrical waste and is disposed of according to the relevant regulations. The unit can also be
returned to the manufacturer.
GPRS
Status
Ethernet
