TABLE OF CONTENTS
Safety Precautions 01-02
Product Overview 03-05
Operation Instructions 05-11
Maintenance Instructions 11-13
Filter Replacement 13-16
UVC Lamp Replacement 16
Common Problems and Solutions 16-18
Transportation and Storage Conditions 18
SAFETY PRECAUTIONS
Please read the instructions carefully and
completely before proceeding with
installation of the product to better
understand the product and to prevent
personal injury and damage.
To reduce the risk of fire or electric shock, do not use this appliance with any solid-state
speed control device.
Do not spray any paint, insecticide, ethyl alcohol, or any other chemical agent on
the appliance’s surface. It can cause a crack, electric shock, or fire. If there is a
chemical accumulated inside of the device, it will be discharged from the air outlet and
dispersed back into the living space. Please ensure the room is well ventilated if
using any of the listed chemicals.
The air purifier should not be used in a flammable and combustible environment
or environment with corrosive air.
When the device is on, please do not touch the air inlet or outlet, or put a hand or
any object into the air outlet so as to prevent injury or damage to the product.
Do not sit on or place any objects on the device.
Device is designed for indoor, dry location installation. Not intended for bathroom or high
humidity enviornment. Improper usage may cause fire, electric shock, or malfunction.
Do not modify, dismantle or repair the appliance. This may cause fire, electric shock,
or malfunction.
This appliance is equipped with a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat this safety feature.
Do not use the appliance if the power cord or plug is broken, damaged, and/or defective. This
can cause electric shock or fire. Do not touch the power cord with a wet hand. The power
cord should only be replaced by the manufacturer or an authorized repair professional.
Please clean the foundation and remove the primary filtration net of the PM2.5
module to make sure the appliance performs as intended.
Unplug the device from the wall before moving or performing any maintenance.
Unplug the device from the wall if it will not be used for an extended period of time.
Turn the device off and unplug from the wall if there is a peculiar smell coming from the
appliance. Contact manufacturer technical support if this occurs.
Do not place foreign objects into the air outlet. Please check the unit for foreign
objects before use.
The air purifier should be placed at least 20in (50cm) from the wall or other objects.
Unplug or disconnect the appliance from the power supply before performing any service
or maintenance on the appliance.
This product complies with the maximum allowable concentration of ozone of 0.050
parts per million by volume (ppmv) in a 24-h period.
WARNING - Failure to follow the instructions below can damage the product
or cause personal injury.
WARNING - Failure to follow the instructions below can damage the product
or cause personal injury.
Lorem ipsum
