Fiilex MATRIX Bedienungsanleitung
Quick Start Guide
Mode D’emploi Rapide
MATRIX
Table of Contents
What’s In The Box
Parts Diagram
Basic Operation
Rear Panel Interface Operation
Accessories Overview
Optional Compatible Accessories
Specifications
Error Codes
For Your Safety
Warranty
1
2
3
4
5
6
7
7
7
8
Sommaire
Contenu de la boîte
Schéma des pièces
Fonctions de base
Fonctionnement de l’interface du panneau arrière
Vue d’ensemble des accessoires
Accessoires compatibles en option
Spécifications
Codes d’erreurs
Sécurité
Garantie légale un an
9
10
11
12
13
14
15
15
15
16
What’s In The Box
1
Matrix Light
Clamp Mount
External Power Adapter
20’ DC Cable
2
Parts Diagram
Handle
Fan Outlet
Antenna
Top Latch
Bottom Latch
Combo Pin Receiver
Locking Knob
Yoke
Yoke Knob
On / Off Button
LCD Display
DMX Address / WiFi Knob
1
2
3
4
5
6
7
8
9
10
11
12
USB Port (Mini USB)
Intensity Control Knob
HUE Tuning Knob
CCT Tuning Knob
Fan Inlet
13
14
15
16
17
DMX Output (XLR-Female 5-Pin)
PowerCon Connection Port
DMX Input (XLR-Male 5-Pin)
18
19
20
Basic Operation
3
• Turning the Light On
Insert the PowerCon Cable into the PowerCon Connection Port (19). Rotate clockwise
to lock in place. Plug in the light. Press the On / Off Button (10) to turn the light on.
• Positioning the Matrix
Loosen the Yoke Knob (9) to adjust the Matrix to the desired position. Tighten the Yoke
Knob (9) to secure.
• Mounting the Matrix
The Matrix can be mounted to baby and/or junior stands with the combo pin. Secure
the light by tightening the Locking Knob (7).
• DMX Interface
The Matrix is equipped with two DMX interfaces (18, 20). XLR ports are used to send
the DMX signal to the lamps. Both interfaces include in/out ports for the purpose of
daisy-chaining the DMX line through to the next light.
• USB Interface
The Matrix is equipped with a mini USB Port (13) for updating the Matrix’s firmware.
Please register your product at www.fiilex.com to be informed when firmware updates
are available.
• WiFi Controllability
The Matrix is WiFi ready for remote control. Use smart device app to connect up to
four Matrix lights and operate them remotely. App can set intensity, CCT, hue, and
customized effects.
Rear Panel Interface Operation
4
KNOB
CCT
PWR
HUE
DMX
RANGE
2800K~6500K
100%-0%
± .25 Magenta / Green
001 ~ 510
FUNCTION
Set color temperature
Set intensity
Set hue value
Set DMX address
Set DMX Address:
1. Double click the DMX Address / WiFi Knob (12) to activate the DMX
address setting function on the LCD Display (11). Once activated, a
blinking line will appear below the DMX address.
2. Rotate the knob until desired address appears.
3. Once the desired address is selected, click the knob to complete the setting or the value
will be saved in 5 seconds automatically.
4. By default, when a DMX address is selected, the Matrix assigns the next two addresses.
The occupied addresses control the functions in following order:
(1) Intensity (2) CCT (3) Hue
DMX mode always takes the precedence over WiFi control mode.
The Matrix light is also operable via the Fiilex WiFi app. Please visit Fiilex.com for more info.
MAXMIN PWR
HUE
6500K2800K CCT
Accessories Overview
5
Press the silver button and slide the Clamp Mount into the back
of Power Adapter. Tighten the lock knob clockwise to secure
the Clamp Mount on the Power Adapter.
Unlock the lock knob on
the Clamp Mount.
Push the button and slide it
into the Power Adapter.
Lock the lock knob
on the Clamp Mount.
Set Clamp Mount
Connect DC Power Adapter to Matrix PowerCon Connection Port (19)
Push
Slide
Unlock
Loosen the lock handle
and fix it on the pole.
320W / 54V Power Adapter
Push
DC Connecter
Connect to Matrix Light Body
20’ DC Cable
AC Cable
To disconnect the joint body,
just push the button.
6
Optional Compatible Accessories
Matrix Barndoor
Hang the recessed topside of the barndoor on the
Top Latch (4) of the Matrix head, and then push the
bottom side towards Matrix until the Bottom Latch
(5) clicks.
Matrix Fresnel Lens
Place recessed bottom of the fresnel lens on the
Bottom Latch (5) of Matrix head, and then push the
top side towards Matrix until the Top Latch (4) clicks.
The Matrix features built-in rod mounts so that
the softbox attaches directly to the light head
with no speed ring required. The level of
diffusion is adjustable with included inner and
outer baffles.
The optional Grid accessory attaches via Velcro
to the front of the softbox, reducing the spread
of the light and resulting in illumination that
creates a more dramatic and shadowed effect.
Matrix Softbox and Grid
See website for additional accessories. www.fiilex.com
Input Port Detachable PowerCon Cable
7
Beam Angle
Mounting
Tilt Angle
DMX Control
Mini USB Interface
Housing Colors
IP Rating
LED Lifetime
Certifications
42,000 Hours
IP24
Black
For Firmware Upgrades
110° / 30° with Matrix Fresnel Lens (Not Included)
2 XLR Ports (512 Addresses)
+/- 90°
Baby Stud 5/8" Female (16mm) and Junior Stud 1-1/8" Male (28mm)
CE, UL, FCC
Size (Without Barndoor)
Weight (Includes Yoke)
LED
Thermal Design
CCT Range
Hue Control
Power Consumption
Operating Temperature 32-104ºF / 0-40º C (Over Temperature Protection)
4x Dense Matrix LED
Weight (Power Adapter) 5.1 lbs / 2.3kg
2800-6500K Continuous Tuning
±.25 Magenta / Green
CRI ≥ 93 (3000K-5600K)
320W Max AC / 300W Max DC / Comparable in Output to 1500W Tungsten
Input Voltage
AC Power: 100-240V AC, 50~60Hz, Max 340W / DC Power: 45-54V DC, Max 300W
Advanced Vapor Cooling System
9.5 lbs / 4.3kg
L 6.7″ x W 11.6″ x H 16.5″ / 171mm X 294mm x 418mm (With Yoke)
01
OVERHEAT
Over Voltage Protection
Under Voltage Protection
02
Display and Control Board Conjunction Error
05
14 / 24 / 34 / 44
16 / 26 / 36 / 46
03
Fan Error
Array 1 / 2 / 3 / 4 Thermistor Conjuction Error
PCBA 1 / 2 / 3 / 4 Thermistor Conjuction Error
Array or PCBA Overheat
Specifications
For Your Safety
Error Codes
•CAUTION! High Beam Intensity! - Do NOT look into the light source of the fixture.
• Do NOT point the light at combustible or flammable materials.
• Do NOT attempt to disassemble the body of Matrix. Doing so will void the warranty.
• Do NOT install Matrix in a damp or wet area.
• Do NOT cover/block the side and back air vents.
• Use only the included power supply. Failure to do so may cause damage to the light.
• Use only a soft, dry towel to gently clean the exterior of the light.
• Do NOT lift or suspend the light by the power cable.
• Do NOT use the Matrix or accessories if they display any physical damage.
• Before first use, make sure to remove all protective membranes.
8
Fiilex.com
1689 Regatta Blvd., Richmond, CA 94804
Information and Specifications in this document are subject to change without notice. DiCon Lighting, Inc. assumes no
responsibility or liability for any error or inaccuracies that may appear in this manual. Unlawful reproduction or distribution in any
manner without the written permission of DiCon Lighting, is strictly prohibited.
© DiCon Lighting 1996-2016. All rights reserved.
Unless otherwise stated, your product is covered by a one year parts and labor limited
warranty. Fiilex guarantees, to the original buyer, that this product is to be free of defects
in both workmanship and material for a period of one year from the date of shipment. This
warranty extends to all products which have proved defective through normal use but
excludes products that have been disassembled, modified or misused by the buyer or any
other person. This warranty is in lieu of all other warranties, and disclaims all warranties
expressed or implied, including any warranty of merchantability, fitness for a particular
purpose, or arising from the course of dealing between the parties or usage of trade.
Returning an Item Under Warranty for Repair
It is necessary to obtain a Return Authorization Number (RA#) from your dealer/ point of
purchase BEFORE any units are returned for repair. Fiilex will make the final determina-
tion as to whether or not the unit is covered by warranty. Fiilex will replace or repair to
proper working condition any products that are returned under warranty. Products
repaired or replaced under warranty are under warranty only for the remaining unexpired
period of time of the original warranty.
Any Product unit or part returned to Fiilex must be packaged in a suitable manner to
ensure the protection of such Product unit or parts. The package must be clearly and
prominently marked to indicate that the package contains returned product units or parts
with a Return Authorization (RA#) number. All returned product units or parts must be
accompanied by a written explanation of the alleged problem or malfunction.
1 Year Limited Warranty
Inhaltsverzeichnis
Sprachen:
Beliebte Leuchte Handbücher anderer Marken
Emos
Emos CLASSIC ZY1431T Bedienungsanleitung
Westinghouse
Westinghouse Outdoor Lighting Fixture Bedienungsanleitung
Hedler
Hedler C 12 silent Bedienungsanleitung
Blizzard Lighting
Blizzard Lighting Puck: CSI Bedienungsanleitung
Energetic Lighting
Energetic Lighting ELYSL-5004 Series Bedienungsanleitung
Lightmaxx
Lightmaxx Shaft 5R Bedienungsanleitung
Cooper Lighting
Cooper Lighting Halo L3232E Bedienungsanleitung
Stageline
Stageline ODW-2410RGBW Bedienungsanleitung
Light Sky
Light Sky Tornado Series Bedienungsanleitung
Lightolier
Lightolier Paralyte 2424 PLA2G9LS26U Bedienungsanleitung
Lightolier
Lightolier Lytespan 83ED17S Bedienungsanleitung
Lightolier
Lightolier Calculite CS8226 Bedienungsanleitung