Fisher-Price 79534 Bedienungsanleitung

Model Number: 79534, 79545, 79546

Please save these instructions for future reference.

Tool needed for assembly: Phillips Screwdriver (not included).

Use only for a child who is unable to push up on hands and knees, pull up or sit unassisted.

BOUNCE ’N PLAY

ACTIVITY DOME

Product features may vary from picture above.

Occasionally a consumer may experience a problem with one of our products. If this should happen, please call us toll-free, rather than

return this product to the store. Usually we can solve the problem on the telephone or by sending you replacement parts. Please call

Fisher-Price® Consumer Relations, toll-free at 1-800-432-KIDS, 8 AM - 6 PM EST Monday through Friday. Hearing-impaired consumers

using TTY/TDD equipment, please call 1-800-382-7470. Or, write to: Fisher-Price® Consumer Relations, 636 Girard Avenue, East Aurora,

New York 14052.

Failure to follow these warnings and the assembly instructions could

result in serious injury or death.

• Never leave child unattended.

• To prevent suffocation from entrapment, use only the Fisher-Price®pad

provided. Never use additional padding or mattress.

• To prevent falls, use only for a child who is unable to push up on hands

and knees, pull up or sit unassisted.

• To prevent strangulation:

_Never place items with a string, such as hood strings or pacifier cords,

around a child's neck.

_Never place this product near a window where cords from blinds or

drapes can strangle a child.

• Never place product on an elevated surface.

• Never move or carry this product with a child in it. This product is not

designed to be used as a carrier and will become unstable.

• The Bounce ’n Play Activity Dome must be fully erected prior to each use.

• Never use plastic shipping bags or other plastic film as mattress covers.

They can cause suffocation.

WARNING

CONSUMER INFORMATION

WARNINGS

Base

Pad

Metal Canopy Stay

3 Toys

(Toys may

be different

than shown)

2 Base Wires

2 Covers

Plastic Mesh Cover Stay

In its unassembled state, this

product contains small parts.

Adult assembly is required.

CAUTION

PARTS

M5 x 113/16" Screw - 2

M5 Lock Nut - 2

M6 x 15/8" Screw - 8

M6 Lock Nut - 8

SHOWN ACTUAL SIZE

Spring - 4

• Insert an M6 x 15/8" screw through each frame tube and into

the frame.

• Fit an M6 lock nut (so that the protruding side is toward the

fabric) into each middle opening on the back of the frame.

Metal

Canopy

Stay

• Insert the metal canopy stay through the canopy tunnel.

• Open the base and position it upright on a flat surface,

as shown.

• Locate the end of the base with the mesh cover. Insert the

entire plastic mesh cover stay into one of the button holes

in the mesh cover.

• Be sure to tuck the plastic mesh cover stay away from the

button hole in the mesh cover.

Frame Tube Frame Tube

• Position the ends of the frame tubes against the middle holes

in a frame.

IMPORTANT! Before each use or assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges.

DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed.

Never substitute parts.

M6 Lock Nut

Canopy Tunnel

Middle Hole Middle Hole

Frame

Frame Tube

M6 x 15/8" Screw - 4 M6 Lock Nut - 4

Base

Mesh Cover

Button Hole Plastic Mesh

Cover Stay

Protruding

Side

ASSEMBLY

• Tighten the screws with a Phillips screwdriver. Do not

over-tighten.

• Repeat this procedure to attach the other ends of the frame

tubes to the frame on the other side of the base.

• Position the base wires around the base so that the ends point

upward and are against the lower holes in a frame.

• Place a spring onto an M6 x 15/8” screw.

• Insert the M6 x 15/8" screw with spring through a base wire and

into the frame.

• Fit an M6 lock nut (so that the protruding side is toward the

fabric) into each lower hexagonal opening on the back of

the frame.

• Tighten the screws with a Phillips screwdriver. Do not

over-tighten.

• Repeat this procedure to attach the other ends of the base

wires to the frame on the other side of the base.

Base Wire

Lower Hole

Spring

Frame

• Position one end of the metal canopy stay against the upper

hole in a frame.

• Insert an M5 x 113/16" screw through the hole in the cover.

• Fit the end of the screw through the hole in the metal canopy

stay and into the upper hole in the frame.

• Push on the cover to insert and “snap” the tab on the cover into

the slot in the frame. Make sure you hear a “snap”.

• Fit an M5 lock nut (so that the protruding side is toward the

fabric) into the upper hexagonal opening on the back of

the frame.

• Tighten the screw with a Phillips screwdriver. Do not

over-tighten.

• Repeat this procedure to attach the other end of the metal

canopy stay and the remaining cover to the frame on the other

side of the base.

Upper

Hole

Cover

Slot Tab

Lower Hole

M5 x 113/16" Screw -2

Metal Canopy Stay

M6 x 15/8" Screw - 4

M5 Lock Nut -2

Protruding

Side

Protruding Side

M6 Lock Nut - 4

ASSEMBLY

Spring - 4

• Fasten the pad fasteners to the base fasteners.

• Lift the canopy.

• Attach the toys to the canopy fasteners.

IMPORTANT! Assembly is now complete, but Bounce ‘n Play

Activity Dome is not ready for use. Please refer to the Use

instructions, on this page, beginning with step 2.

Pad

Fastener

Toys Canopy

Fasteners

Sides of Base Wire

• Position the product upright on a flat surface.

• Grasp both sides of a base wire.

• Pull both sides of the base wire outward and then let the base

wire rotate down.

Note: If the base wire does not freely rotate down, pull the sides

of the base wire further outward.

To Unfold

ASSEMBLY

USE

Frame

Groove Groove

• Lift the product up slightly so that each side of the base wire

“snaps” into the groove in each frame. Make sure you hear

a “snap”.

Sides of Base Wire

Using the Canopy

• Push down on the product to be

sure each side of the base wire is

in the correct position. The base

wire should rest in the groove in

each frame.

• Repeat Use steps 1 - 3 to unfold

the other base wire.

Base Wire

Groove

Frame

Correct

• Adjust the canopy and mesh cover up.

• While holding the mesh cover up, fasten the zipper closed.

Canopy Up

Mesh Cover Up

Zipper

• Adjust the canopy up or down.

Canopy

Down

Canopy Up

Using the Mesh Cover

USE

• Grasp both sides of a base wire.

• While lifting the product up slightly, pull both sides of the

base wire outward to remove the base wire from the groove

in each frame.

Frame

Groove Groove

To Fold for Portability

Sides of Base Wire

If you have any questions about this product:

In CANADA: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga,

Ontario L5R 3W2. Questions? 1-800-567-7724.

In GREAT BRITAIN: Mattel U.K., Ltd., Helpline: 01628 500303.

In AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870,

Richmond, Victoria 3121 Australia. Consumer Advisory Service 1-800-800-812

(valid only in Australia).

The pad and toys are machine washable. Wash the pad and toys

separately in cold water on the gentle cycle. Do not use bleach.

Tumble dry separately on low heat and remove promptly. The

fabric and frame may be wiped clean using a mild cleaning

solution and a damp cloth.

Base Wire

• Rotate the base wire up.

• Repeat this procedure to fold the other base wire.

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. 79534F-0920

USE

CARE

Andere Handbücher für 79534

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fisher-Price Baby- und Kleinkindmöbel Handbücher

Fisher-Price

Fisher-Price J6987 Bedienungsanleitung

Fisher-Price

Fisher-Price HBD26 Kurzanleitung zur Einrichtung

Fisher-Price

Fisher-Price V8605 Betriebsanleitung

Fisher-Price

Fisher-Price GNW36 Bedienungsanleitung

Fisher-Price

Fisher-Price H5564 Bedienungsanleitung

Fisher-Price

Fisher-Price FFN36 Bedienungsanleitung

Fisher-Price

Fisher-Price L7836 Bedienungsanleitung

Fisher-Price

Fisher-Price CMV29 Bedienungsanleitung

Fisher-Price

Fisher-Price M3176 Bedienungsanleitung

Fisher-Price

Fisher-Price CBX23 Betriebsanleitung

Fisher-Price

Fisher-Price FWY39 Kurzanleitung zur Einrichtung

Fisher-Price

Fisher-Price M4774 Bedienungsanleitung

Fisher-Price

Fisher-Price V3393 Bedienungsanleitung

Fisher-Price

Fisher-Price K5507 Bedienungsanleitung

Fisher-Price

Fisher-Price FTM99 Bedienungsanleitung

Fisher-Price

Fisher-Price M5085 Bedienungsanleitung

Fisher-Price

Fisher-Price T2522 Bedienungsanleitung

Fisher-Price

Fisher-Price X7035 Bedienungsanleitung

Fisher-Price

Fisher-Price Sit-Me-Up Bedienungsanleitung

Fisher-Price

Fisher-Price BMK72 Bedienungsanleitung

Fisher-Price

Fisher-Price B2875 Bedienungsanleitung

Fisher-Price

Fisher-Price G4415 Bedienungsanleitung

Fisher-Price

Fisher-Price GVH09 Bedienungsanleitung

Fisher-Price

Fisher-Price FHC54 Bedienungsanleitung

Beliebte Baby- und Kleinkindmöbel Handbücher anderer Marken

Mocka

Mocka Learning Tower Bedienungsanleitung

VERTBAUDET

VERTBAUDET 62003-2789 Bedienungsanleitung

Summer

Summer MY FUN POTTY Bedienungsanleitung

Grotime

Grotime Changeover Bedienungsanleitung

Fillikid

Fillikid 1221 Bedienungsanleitung

Relita

Relita loft bed ALEX Bedienungsanleitung

Joovy

Joovy Qool Bedienungsanleitung

KidKraft

KidKraft Step n Store Bedienungsanleitung

Germania

Germania Moon 4048.101 Bedienungsanleitung

BabyGo

BabyGo Amila Bedienungsanleitung

Triclimb

Triclimb AT1 Bedienungsanleitung

Graco

Graco Dream Suite Bedienungsanleitung

Delta Childrens Products

Delta Childrens Products BB87116CR Bedienungsanleitung

Costway

Costway BB5591 Bedienungsanleitung

SAUTHON

SAUTHON UP CHENE DORE UI101A Bedienungsanleitung

Delta Children

Delta Children Classic Bedienungsanleitung

Chicco

Chicco Next 2 Me Magic Bedienungsanleitung

Flexa

Flexa 82-10020-1/-40 Bedienungsanleitung