Fisher-Price H4790 Bedienungsanleitung

Instructions

Model Number: H4790

Please read these instructions before assembly and use of this product.

Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included).

Product features and decorations may vary from photo above.

www.fisher-price.com

WARNING

IMPORTANT! KEEP FOR FUTURE REFERENCE.

WARNING

This product contains small parts in its unassembled state.

Adult assembly is required.

Prevent serious injury or death from falls or sliding out:

• The child should at all times wear a safety harness correctly fitted and adjusted.

The tray is not designed to hold the child in the chair.

• Always keep child in view while in the high chair.

• Never leave child unattended.

• It is recommended that the high chair be used in the upright position only by

children capable of sitting upright unassisted.

CAUTION

Warning and Caution

Parts

Pad

3 Food Trays

2 Toys (Toys may be different)

Seat Back

Seat Bottom

Frame

Hinge Rod

2 Seat Bottom Tubes

4 Screw Retainers

Base Tray

Frame

Footrest

Headrest

Basket Storage Caddy

Front Base

Back Base

#10 x 2.2 cm

Black Screw

#10 x 2.2 cm

Black Screw

#10 x 2.2 cm Black Screw - 7

Shown Actual Size

#8 x 1.9 cm Screw - 8

Tighten and loosen all screws with a Phillips screwdriver.

Do not over-tighten the screws.

#8 x 1.9 cm Screws

#10 x 2.2 cm

Black Screw

• Slide a seat bottom tube through each set of plastic rings on

the seat bottom.

• Place the seat bottom face down on a flat surface.

• At an angle, fit the footrest on the seat bottom, as shown.

Assembly

Plastic Rings

Footrest

Seat Bottom

IMPORTANT! Before each use, inspect this product for damaged

hardware, loose joints, missing parts or sharp edges. DO NOT use

if any parts are missing or broken. Contact Mattel for replace-

ment parts and instructions if needed. Never substitute parts.

Seat Bottom Tubes

Plastic Rings

Seat Bottom Tubes

Plastic Rings

#8 x 1.9 cm Screw - 4

• Align the holes in the plastic rings and the seat bottom tubes.

• Insert a #8 x 1.9 cm screw through each plastic ring and into

the seat bottom tubes, as shown. Tighten the screws.

• Push the seat bottom tubes back and forth to be sure they are

secured to the seat bottom. If the seat bottom tubes move, you

have probably not fastened them properly. Remove the screws

and check to be sure the screw holes in the seat bottom tubes

and seat bottom plastic rings are aligned. Replace and tighten

the screws.

Assembly

Insert Screws Here

Footrest

• Insert two #10 x 2.2 cm black screws through the footrest and

into the seat bottom. Tighten the screws.

#10 x 2.2 cm Black Screw - 2

• Turn the seat bottom assembly upright.

• Fit the seat back pins into the openings in the top side of the

seat bottom assembly.

Seat Back Pin

Opening

Seat Bottom Assembly

Opening

Seat Back Pin

Hinge Rod

Hinge

• Turn the seat assembly face down.

• Insert the hinge rod through the hinge on the seat back and

seat bottom, as shown.

• Insert a #10 x 2.2 cm black screw into the hinge rod. Tighten

the screw.

• Set the seat assembly aside for Assembly step 9.

#10 x 2.2 cm Black Screw

• Pull the frame leg out on each frame to open. Make sure it

"clicks" into place.

Frame Leg

Assembly

• Identify the back and front base. The front base has tapered leg

tubes. You will use the back base for the next assembly step.

Tapered Leg Tube

Back Base

Front Base

Screw Retainer - 2

#10 x 2.2 cm Black Screw - 2

• Position a frame so that the decorated side is outward.

• Insert the back leg of a frame into the back base.

• Fit a screw retainer over the hole in the back base, as shown.

• Insert a #10 x 2.2 cm black screw through the screw retainer

and back base. Insert the back leg of a frame into the back

base. Tighten the screw.

• Repeat this procedure to attach the other frame back leg

to the other side of the back base.

Hint: The #10 x 2.2 cm black screws may have been assembled to the

screw retainers.

Frame Back Legs

Frame Decorated Side

Back Base Hole

Screw Retainers

Back Base Hole

• While pressing the levers on the seat height adjusters, lift them

to position 4 on the frame front legs, as shown.

Seat Height Adjusters

Position 4

Press Lever

• Fit the seat assembly between the two frames.

• Insert the seat bottom tubes into the sockets in each seat

height adjuster.

Hints:

•Be sure the seat height adjusters are in the same position (position 4).

•You may need to push the frames apart slightly to fit the seat bottom

tubes into the seat height adjuster sockets.

Seat Bottom Tubes

Sockets

Seat Assembly

Assembly

Front

Leg Holes

Screw Retainer - 2

#10 x 2.2 cm Black Screw - 2

• Insert the frame front legs onto the front base.

• Fit a screw retainer over a hole in the front leg.

• Insert a #10 x 7/8" (2.2 cm) black screw through the screw

retainer and front leg. Tighten the screw.

• Repeat this procedure to secure the other end of the front

base with the remaining screw retainer and #10 x 2.2 cm

black screw.

Hint: The #10 x 2.2 cm black screws may have been assembled to the

screw retainers.

Screw Retainers

Seat Bottom Tube Ends

Push Seat

Height

Adjuster

Push Seat

Height

Adjuster

#8 x 1.9 cm Screw - 2

• Push each seat height adjuster to be sure they are completely

on the seat bottom tubes.

• Insert a #8 x 1.9 cm screw through each seat height adjuster

and the ends of the seat bottom tube. Tighten the screws.

Assembly

Back and Bottom View

Seat Bottom Tube Ends

Seat Height Adjusters

• From the back and bottom of the assembly, insert a #8 x 1.9 cm

screw through both seat height adjusters and the ends of the

seat bottom tube. Tighten the screws.

#8 x 1.9 cm Screw - 2

15 Back and Bottom View

Hole

Pad

Hole

Elastic Loops

Front View

• Lift the assembly upright.

• From the front of the assembly, place the pad onto the seat.

• Lift the bottom of the pad. Insert the two elastic loops on the

pad through the holes in the seat bottom.

• From the back and bottom of the seat, hook the elastic loops to

the tabs on the seat.

Tabs

Assembly

Shoulder Portion

• Insert the crotch belt through the slot in the pad. Make sure

the crotch belt is not twisted.

• Fold the top of the pad down.

• Remove the shoulder portion of the waist/shoulder belts by

feeding them through the slots in the seat back.

• Lift the top of the pad.

• Thread the waist/shoulder belts through the bottom slots in the

back of the seat pad.

Bottom Slots



Slot

Crotch

Belt

• Fit the top of the pad over the seat back.

• Fold the bottom edge of the pad under the edge of the seat

bottom to fasten it.

• First, insert the shoulder portion of the shoulder/waist belt

through the slots in the headrest pad. Then, insert

the shoulder portion of the shoulder/waist belt through the

slots in the pad and seat back.

- Use the lower shoulder belt slots for a smaller baby.

- Use the upper shoulder belt slots for a larger baby.

Upper Shoulder Belt Slots

Shoulder Portion

Lower Shoulder

Belt Slots

Headrest Pad Slots

Assembly

• Fit the strap on the top of the headrest through the handle.

• Fit the pad strap through the handle and press it to the small

fastener on the back of the seat.

• Fit the headrest strap through the handle and press it to the

large fastener on the back of the seat.

Handle Pad Strap

Headrest Strap

Back View

Small Fastener

Large Fastener



Tab

Elastic Loop

Tab

Elastic Loop

Belt Ends

• From behind the seat, be sure the shoulder portion of the

waist/shoulder belts are secure in the seat back slots.

• Hook the elastic loops on each side of the pad onto the tabs

in the seat back.

Back View

• Fit the storage caddy onto either frame tab.

Frame Tab

Storage Caddy

• Fit the basket onto the other frame tab.

Assembly is now complete.

Basket

Inhaltsverzeichnis

Andere Fisher-Price Baby- und Kleinkindmöbel Handbücher

Fisher-Price

Fisher-Price BMB79 Bedienungsanleitung

Fisher-Price

Fisher-Price HBY75 Bedienungsanleitung

Fisher-Price

Fisher-Price CFM96 Bedienungsanleitung

Fisher-Price

Fisher-Price HGP52 Bedienungsanleitung

Fisher-Price

Fisher-Price M7930 Bedienungsanleitung

Fisher-Price

Fisher-Price J7813 Bedienungsanleitung

Fisher-Price

Fisher-Price CMR14 Bedienungsanleitung

Fisher-Price

Fisher-Price GCG61 Bedienungsanleitung

Fisher-Price

Fisher-Price L0542 Bedienungsanleitung

Fisher-Price

Fisher-Price BCG43 Bedienungsanleitung

Fisher-Price

Fisher-Price Rainforest M1187 Bedienungsanleitung

Fisher-Price

Fisher-Price FWY39 Kurzanleitung zur Einrichtung

Fisher-Price

Fisher-Price CBV06 Bedienungsanleitung

Fisher-Price

Fisher-Price CFB88 Bedienungsanleitung

Fisher-Price

Fisher-Price X7046 Bedienungsanleitung

Fisher-Price

Fisher-Price T2806 Bedienungsanleitung

Fisher-Price

Fisher-Price R8641 Bedienungsanleitung

Fisher-Price

Fisher-Price CMR03 Installationsanleitung

Fisher-Price

Fisher-Price BGT91 Bedienungsanleitung

Fisher-Price

Fisher-Price BMH47 Bedienungsanleitung

Fisher-Price

Fisher-Price FLD88 Bedienungsanleitung

Fisher-Price

Fisher-Price C2118 Bedienungsanleitung

Fisher-Price

Fisher-Price GVH09 Bedienungsanleitung

Fisher-Price

Fisher-Price M5597 Bedienungsanleitung

Beliebte Baby- und Kleinkindmöbel Handbücher anderer Marken

Mocka

Mocka Learning Tower Bedienungsanleitung

VERTBAUDET

VERTBAUDET 62003-2789 Bedienungsanleitung

Summer

Summer MY FUN POTTY Bedienungsanleitung

Grotime

Grotime Changeover Bedienungsanleitung

Fillikid

Fillikid 1221 Bedienungsanleitung

Relita

Relita loft bed ALEX Bedienungsanleitung

Joovy

Joovy Qool Bedienungsanleitung

KidKraft

KidKraft Step n Store Bedienungsanleitung

Germania

Germania Moon 4048.101 Bedienungsanleitung

BabyGo

BabyGo Amila Bedienungsanleitung

Triclimb

Triclimb AT1 Bedienungsanleitung

Graco

Graco Dream Suite Bedienungsanleitung

Delta Childrens Products

Delta Childrens Products BB87116CR Bedienungsanleitung

Costway

Costway BB5591 Bedienungsanleitung

SAUTHON

SAUTHON UP CHENE DORE UI101A Bedienungsanleitung

Delta Children

Delta Children Classic Bedienungsanleitung

Chicco

Chicco Next 2 Me Magic Bedienungsanleitung

Flexa

Flexa 82-10020-1/-40 Bedienungsanleitung