FlashPoint XPLOR 600 Pro R2 Bedienungsanleitung
FPLFX600PB
Bowens Mount
The world is yours to XPLOR
XPLOR 600 PRO
The compact 600ws marvel invites you to go beyond the straights of wire
dependency and soar into the free and easy heights only R2 Radio tenders. True,
accurate manual exposures, lithium powered mobile imaging that spurs your
creative imagination to conquer distant vistas, solve the challenging lighting
situation in any environment, adapt to multiple camera systems right out of the
box. The unmatched R2 Radio System links Canon, Nikon, Sony, Fujilm and
Olympus/Panasonic seamlessly for the ultimate to remote solutions. The sun is no
match to this exceptional performer with superior HSS up to 1/8000s. And the
broad spectrum of Bowens mount light modiers available, contours every
possible lighting occurrence from studio to peak.
The battery recharge is a snap, too, using the external power charger to keep the
action going without tying up the ash to re-energize. Add the pro LED modeling
light feature and the picture is complete.
The XPLOR 600Pro is the next iteration of the Flashpoint R2 radio system,
compatible with the R2 Canon, Nikon, Sony, Fujilm and Olympus/Panasonic
camera systems, for remote power control and shooting. With a focus on portable
lighting, the R2 Family liberates you from the hassle and tangle of wired 600ws
monolights - whether you are a wedding or event photographer, environmental
portraiture shooter, freelance commercial studio illustrator, eager photojournalist,
a wandering backpack adventurer, or fast action sports snapper.
Take a deep breath. Your reach is now beyond your dreams.
XPLOR 600Pro TTL is reality.
•Studio Quality Light: Delivers 600ws, with a GN of 285ft/87m ISO 100, standard
reflector.
•Wireless Radio: Built-in Flashpoint R2 wireless 2.4Ghz system, compatible with
Canon, Nikon, Sony, Fujifilm, Olympus and Panasonic camera systems.
•Blazing fast Recycle time: 0.9s at Full Power rivals AC strobes.
•Precise power output: power adjusts 9 stops from full power 1/256 to 1/1 in 25
steps.
•Stable Color Temperature mode: color temperature guaranteed within ±75°K
over the entire power range.
•LED Modeling Lamp: Brilliant 38W LED module with Proportional and Variable
settings.
•HSS supremacy: Up to 1/8000s high-speed sync flash triggering overcomes sunlit
challenges.
•Advanced functions: Mask Sequencing, Multi Flash, Slave Delay.
•Dot-matrix LCD panel: Clear and convenient operation.
•Modifier Accessories: Bowens mount ease for softbox, beauty dish, snoots, color
gels, reflectors...
01
We Celebrate Your Flashpoint XPLOR 600Pro R2 Wireless Radio
Monolight selection!
Safety Instructions
•Always keep this product dry. Do not use in rain or in damp conditions.
•This product contains high-voltage electronic parts. Touching the high-voltage
circuit inside it may result in electric shock. Do not disassemble. Should repairs
become necessary, this product must be sent to an authorized maintenance
center.
•Stop using this product if it breaks open due to impact or force. Electric shock
may occur if you touch the internal parts.
•Do not use the ash unit in the presence of ammable gases, chemicals and
ignitable materials. In certain circumstances, these materials may be sensitive
to the strong light or electromagnetic interference emitted from this ash unit.
•Do not leave or store the ash unit if the ambient temperature reaches over
120°F/50°C (e.g. in a sun bathed automobile). Electronic parts may be
permanently damaged.
•Do not use any power supply to charge the battery, other than the one
included.
•Do not insert metal parts into any lighting equipment.
•Do not touch the electrical contacts on the strobe or battery or contact them
with any conductive materials.
•Do not re the ash directly into the eyes, especially those of babies, within
short distances. Visual impairment may occur. When taking pictures of babies,
keep the ash unit at least 3.3 feet (1 meter) away from them. Using bounce
ash to reduce light intensity is also recommended.
•This strobe has an over-heat protection circuit, rapid continuous ring will
cause the strobe to slow operation and trigger a “cool down” period. After this
period, the strobe will resume normal operation. You may also reset the strobe
by cycling the power o and then on again.
•The strobe has a locking mechanism to ensure secure operation. To avoid
damage, slide the release before removing any reectors or accessories.
•In case of abnormal function, sparks, excessive heat, ames or smoke,
immediately power o the unit and disconnect the battery, if safely possible.
Have it checked by an authorized technician.
02
03
Conventions Used in This Manual
•This manual is based on the assumption that both the camera and camera
ash’s power switches are powered on.
•The following alert symbols are used in this manual:
The Caution symbol indicates a warning to prevent shooting problem.
The Note symbol gives supplemental information.
04
Table of Contents
01 Foreword
02 Safety Instructions
05 Name of Parts
05 Body
07 LCD Panel
08 Included Accessories
08 Separately Sold Accessories
09 Preparing the XPLOR 600Pro
Installing Reflector (and Other Modifiers)
Installing the Flash Tube
Tilt Lock Handle
10 Battery Pack and Charging
11 Battery Level Indication
12 Wireless Flash: R2 Radio 2.4Ghz Transmission
14 Wireless Multiple Flash Shooting
15 Flash Mode M: Manual Flash
15 Flash Output Range
15 Flash Duration
16 Optical Slave Triggering
17 Flash Mode Multi -- Stroboscopic Flash
18 High-Speed Sync
Stable Color Temperature Option
19 Modeling Lamp
19 Other Applications
R1 Wireless Control Function
Sync Cord Triggering
20 Masking Feature - Unit/Alt C.Fn
Umbrella Mounting
21 Setting Custom Functions/C.Fn
22 Protection Function
Over-Temperature Protection
Error Messages
23 Technical Data
24 Troubleshooting
24 Firmware Upgrade
24 Maintenance
25 Flashpoint Warranty and Customer Care
05
Name of Parts
Body
<MODE> Mode Selection Button
Umbrella Mounting Hole
Mounting Bracket
<SET> Set Button
Select Dial
Bracket Locking Knob
<MENU> Menu Button
< > Wireless
<GR/CH> Group/Channel Button
< H> High Speed
< > Test Button/
Flash Ready Indicator
Audio Beep
< > Modeling Lamp Button
< NO/OFF > Power Switch
Modeling
Lamp (LED)
Tube Socket
Accessory Mount
Light Sensor
Battery Power
Jack
Battery Indicator
Button
Accessory
Locking Ring Mini USB Port
3.5mm Sync Cord Jack
Wireless Control Port
06
Name of Parts
Body
Fan Outlet
Fan Inlet
Tilt Handle Release
Tilt Lock Handle
Ridge
Lithium Battery
Groove
Battery
Locking
Latch
07
Name of Parts
LCD Panel
(1) M Manual Flash
t.11/10100
M
A
10%
1/256
M: Manual ash
Manual ash output
Flash duration
(2) Multi Flash
Multi
AOFF
1/256
5 - 5 Hz
Multi: Stroboscopic ash
Number of ashes
Flash frequency
(3) R2 Radio Transmission Shooting
CH 1 Multi
AOFF
1/256
5 - 5 Hz
: R2 Radio transmission
wireless shooting
Firing group
Channel
M
A1/256
S2
OFF
S1/S2
(4) Optical transmission wireless shooting
08
Included Items
•Flashpoint XPLOR 600Pro Monolight
•Flash tube
•Lithium battery pack
•Battery charger
•Power cord
•Reector
•Carrying bag
•Instruction manual
Separately Sold Accessories
The product can be used in combination with the following accessories sold
separately, so as to achieve best photography eects: R2 Pro & R2 Wireless Flash
Trigger, Softbox, Beauty Dish, Fold up Umbrella, Shoots, Light Stand, etc.
09
Installing a Reflector (or other Accessories or Modifiers)
Installing the Flash Tube
Preparing the XPLOR 600Pro
•
Note: To avoid damage, please detach the ash tube during the transportation.
1. Press down the
Reflector/Modifier Lock
Release lever.
3. Turn clockwise to lock it
into place.
2. Insert the reflector or any
Bowens mount light
modifier into the 3 tabs of
the Reflector/Modifier
Lock Release.
1. Remove the reflector or
other modifiers from
the flash head.
2. Align the 4 Flashtube pins to match the protruding
rings in the Tube Socket [4] surrounding the LED
Modeling Lamp [3] on the XPLOR body. Push the flash
tube in firmly until it is securely seated into the socket.
The flashtube can be handled without protective
gloves as the outer glass shields the actual flashtube.
Tilt Lock Handle
1. The Tilt Lock Handle locks
the angle of the flash tilt by
rotating the lever clockwise
and unlocks by rotating
counterclockwise, to allow
for positioning of the light.
2. The handle resting angle can be set to any degree by
pulling the handle away from the body, and freely
rotating it to your desired position. The handle
springs back to act as a locking lever when released.
Inhaltsverzeichnis
Andere FlashPoint Beleuchtungsausrüstung Handbücher
Beliebte Beleuchtungsausrüstung Handbücher anderer Marken
Qazqa
Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung
Commercial Electric
Commercial Electric 54568141 Bedienungsanleitung
CREE LIGHTING
CREE LIGHTING 304 Series Bedienungsanleitung
Goobay
Goobay 49867 Bedienungsanleitung
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Bedienungsanleitung
Alkalite
Alkalite Krypton KT-81 Bedienungsanleitung
