'
enOPERATING INSTRUCTIONS
Safety class according
EN 50144 – II
This power tool is supplied from singlephase
alternating current mains only. It is double
insulated according to EN 50144, IEC 60745 and
can be connected to grounded or not grounded
sockets.
NOISE
CAUTION
Wear ear defenders if sound pressure level
exceeds 85 dB (A)!
Noise levels, measured according to EN 50144,
are:
Sound pressure level LpA dB (A) 84
Sound power level LWA dB (A) 97
VIBRATIONS
Weighted acceleration, measured according to
EN 50144: 3,1 m/s2
FOR YOUR SAFETY
DANGER!
Before initial operation of the machine, read
the documents, listed below, and only then
start to operate the machine:
lThe present Operating Instruction;
lThe “Safety Instructions”, enclosed in the
packing (indent number No 232.505/01.04)
lThe safety rules and instructions, valid for the
working place, for protection against accidents.
This power tool is manufactured according the
engineering level and the acknowledged Safety
rules.
Despite this, during operation a risk might arise
for the life of the operator or third person, as well
as damage of the tool or any other property
damage.
This power tool shall be used only:
lfor operation, in conformity with its purpose;
lin perfect technical condition.
APPLICATION
lfor operation in industry and household;
lfor mixing low-viscosity emulsions and viscous
materials,forexample:paints,lacquer, adhesives,
mortar, etc.;
lfor operating with mixing attachments and
accessories, specified in this manual or recom-
mended by the manufacturer.
SAFETY INSTRUCTIONS
DANGER!
lThe access of children to the machine is
prohibited.
lIn case the supply cable is damaged during
operation, any contact to the cable is forbidden.
Unplug the machine immediately!. Never operate
a power tool with damaged supply cable.
lAlwayswithdrawtheplug from the power supply
socket before carrying out any work on the
machine.
lCheck the machine and the mixing attachment
prior to beginning operation for presence of
damages, unbalanced attachment and vibrations.
Perform a test trial.
lDraw the cable behind the machine and keep it
away from the rotating parts.
Wear ear defenders and goggles
while operating the machine!
lDuring operation always hold the machine with
both hands and keep proper balance.
lKeep the power tool away from your body.
lSwitch off the power tool and let it stop before
you leave it aside.
lKeep your hands away from rotating parts of
the machine
lPower tools, operated outdoors or in premises
with high humidity, shall be supplied through
residual current device (actuating current - max.
30 mA).
PROPERTY DAMAGES
The power supply voltage shall correspond to the
value, indicated on the name plate with technical
data of the tool.
