Flexit ProNordic CS2500 Bedienungsanleitung

ART.NO. 118044

2020-11

CS2500

118075EN-01

QUICK GUIDE

ProNordic

CS2500

Contents

1. Quick guide ...................................................................................................................4

1.1. HMI ProPanel .....................................................................................................4

1.2. Settings ...............................................................................................................4

1.1.1. Introduction...........................................................................................4

1.1.2. Select language .....................................................................................4

1.1.3. Login.......................................................................................................5

1.1.4. Set time/time channels ........................................................................5

1.1.5. Set the calendar and timing program ................................................5

1.1.6. Week schedule ...................................................................................6

1.1.7. Day schedule .........................................................................................6

1.1.8. Calendar (exceptions and stop) ........................................................7

1.3. Adjust setpoints for speeds and temperatures.............................................8

1.4. Service switch.....................................................................................................8

1.5. Extract air regulation.........................................................................................8

 &KDQJLQJWKHȵRZGLVSOD\XQLWV.......................................................................8

1.7. Alarm handling...................................................................................................8

CS2500

1. Quick guide

1.1. HMI ProPanel

A central element in the system is the HMI (control

panel), where you can adjust settings and take readings.

The control panel consists of an 8-line graphic display,

indicator lamps and controls for the settings. Here is a

short introduction to the control panel showing how to

enter the initial settings in the system.

Info button

Press to enter the main menu

• 2΋ 6WRSFRROGRZQ

• *UHHQODPSVWHDG\ 1RUPDORSHUDWLRQ

• )ODVKLQJJUHHQ 6WDUWLQJ1LJKWRSHUDWLRQWHVW

Nighttime cooling or Night heating/nighttime cooling.

• 2UDQJHODPSVWHDG\ )LUHGDPSHUH[HUFLVH

• $OWHUQDWLQJJUHHQRUDQJH 0DQXDOFRQWURO

Display

Shows information

Dial

• Turn anticlockwise/clockwise to go up/down in

menus or to change values

• Press the button to enter a menu or change a value

• Hold the button down to go directly to the login

menu if the value you want to change

• requires login.

Alarm button

• )ODVKLQJUHG DODUP

• 5HGODPSVWHDG\ 

alarm acknowledged

but remaining

ESC button

• Returns to the

previous menu page

• Cancels current

editing

1.2. Settings

1.1.1. Introduction

7KHȴUVWWLPHWKHV\VWHPLVVWDUWHG\RXQHHGWRJR

through some simple steps to ensure that the system

will function.

If a heating coil has been installed in the ventilation

XQLWWKLVPXVWEHFRQȴJXUHGLQWKHFRQWUROV\VWHPVHH

heating coil manual). There is a quick menu for accessing

the commonest functions on the control panel,

Language, Timing program and Set point settings.

1.1.2. Select language

To change the language on delivery:

Start page > Quick menu > Commissioning >

Language selection

Select your preferred language.

CS2500

1.1.3. Login

In order to make changes to the system, it is normally

necessary to log in. There are four authority levels in

the system, and three of them are password protected.

7KHbOHYHODWZKLFKWKHXVHULVFXUUHQWO\ORJJHGLQLV

shown by the number of keys in the top left hand corner

of the display. The menus show more options or fewer,

depending on the level at which you are logged in.

The following key symbols will be used from now on

in the manual to describe the login level before the

GL΋HUHQWPHQXVIXQFWLRQVFDQEHPDGHYLVLEOHDQG

editable. The same key symbols are shown at the top

OHIWbRIWKHFRQWUROSDQHO

7KHIROORZLQJDFWLRQVDUHSRVVLEOHDWWKHGL΍HUHQW

levels:

Level 1: No restrictions, no password required.

• 5HDGDFFHVVWRDOOPHQXVH[FHSWV\VWHP

SDUDPHWHUVFRQȴJXUDWLRQDQGGHWDLOPHQXV

• Read access to alarm lists and alarm history.

Level 2: End user, password 1000.

One key symbol

• All rights as for level 1, plus:

• 5HDGDFFHVVWRDOOPHQXVH[FHSWFRQȴJXUDWLRQPHQXV

• Write access to the most important setpoints

(Setpoints/Settings > Setpoints).

• Alarms and alarm history can be acknowledged and

reset.

Level 3: System administrator, password 2000.

Two key symbol

• All rights as for level 2, plus:

• 5LJKWVWRDOOPHQXVH[FHSWΔ2FRQȴJXUDWLRQDQG

system settings.

Level 4: OEM, password given only in consultation with

WKH)OH[LWVHUYLFHRUJDQLVDWLRQ

Three key symbol

• All rights as for level 3, plus:

• Rights to all menus and system settings.

Start page > Main menu > Enter PIN

1.1.4. Set time/time channels

Start page > Quick menu > SetUp > Date/

Time Input

1.1.5. Set the calendar and timing program

Start page > Quick menu > SetUp >

Timeswitch program

General

This section describes functions and settings for the

timing program and calendars.

:KHQQRREMHFWZLWKKLJKHUSULRULW\IRUH[DPSOH0DQXDO

control <> Auto) is activated, the system can be switched

R΋RUWKHVWHSVFKDQJHGYLDWKHWLPLQJSURJUDP

$PD[LPXPRIVL[VZLWFKRYHUWLPHVFDQEHVSHFLȴHGSHU

day.

7KHFDOHQGDUVWRSRYHUULGHVWKHFDOHQGDUH[FHSWLRQ

which in turn overrides the normal timing program (only

LQRSHUDWLQJPRGH8SWRSHULRGVRUH[FHSWLRQGD\V

FDQEHVSHFLȴHGIRUHDFKFDOHQGDU

NB. Both setpoints for fan steps

and temperature setpoints

(comfort /economy) are controlled

by the timing program.

CS2500

1.1.6. Week schedule

Parameter Value Function

Present value --- Switch-over according to

schedule

Monday Shows current command when

the current day is Monday. The

latest time that can be entered

for a day is 23:59. Go to the

daily switch-over schedule for

Mondays.

Copy schedule -Mo

-Tu-Fr

-Tu-Su

-Tu

-We

-Th

-Fr

- Sa

-Su

-Ecpt

Copies times for the timing pro-

gram from Monday to

Tuesday-Friday/Tuesday-Sunday.

-Passive (no copying).

-Copying starts. Return to the

display screen.

([FHSWLRQ

Tuesday Same function as for Monday.

... ...

Sunday Same function as for Monday.

([FHSWLRQ Shows current command when

WKHFXUUHQWGD\LVDQH[FHSWLRQ

day. Go to the daily switch-over

VFKHGXOHIRUH[FHSWLRQGD\V

Period: Start (Only Authority level 3.)

Start date for weekly schedule.

*,**. 00 means that the weekly

schedule is always activated. --->

Activate weekly schedule.

Period: End (Only Authority level 3.)

Start date and time for

disabling of weekly schedule.

1.1.7. Day schedule

Parameter Value Function

Present value --- Switch-over according to the

schedule when the current weekday

is the same as the switch-over day

Day schedule

-Passive

-Active

6WDWXVIRUFXUUHQWZHHNRUH[FHSWLRQ

day:

-Current weekday (system day) is

not the same as the switch-over day.

-Current weekday (system day) is

the same as the switch-over day.

Time-1 This is locked to 00:00

Value-1 2΋

Eco.St1

Comf.St1

Eco.St2

Comf.St2

Eco.St3

Comf.St3

Indicates the unit’s operating mode

when Time-1 occurs

Time-2 00:01-

23:59

Switch-over time 2.

*:* ---> Time inactivated

Value-2 ...

Value-6

2΋

Eco.St1

Comf.St1

Eco.St2

Comf.St2

Eco.St3

Comf.St3

Indicates the unit’s operating mode

when Time-2 occurs

Time-3

Time-6

00:01-

23:59

Switch-over time 3-6.

*:* ---> Time deactivated

CS2500

1.1.8. Calendar (exceptions and stop)

([FHSWLRQGD\VFDQEHGHȴQHGLQWKHFDOHQGDU

7KHVHFDQLQFOXGHVSHFLȴFGD\VSHULRGVRUZHHNGD\V

([FHSWLRQGD\VRYHUULGHWKHZHHNO\VFKHGXOH

Calendar exceptions

6ZLWFKRYHUIROORZVWKHZHHNO\VFKHGXOHDQGWKHH[FHSWLRQV

VSHFLȴHGLQWKHGDLO\VFKHGXOHZKHQDVZLWFKRYHUWLPHLV

DFWLYDWHGLQWKHFDOHQGDUH[FHSWLRQ

Calendar stop

7KHV\VWHPLVWXUQHGR΋ZKHQWKHFDOHQGDUVWRS

LVbDFWLYDWHG

Parameter:

Start page > Quick menu > SetUp >

Timeswitch program > Calendar execption

Start page > Quick menu > SetUp >

7LPHVZLWFKSURJUDP!&DOHQGDUȴ[R΍

Parameter Value Function

Current value

-Passive

-Active

Shows whether a calendar time is

activated:

- No calendar time activated

- Calendar time activated

6HOHFWLRQ[

-Date

-Interval

-Weekday

-Passive

6SHFLȴFDWLRQRIH[FHSWLRQW\SH

-A certain day (e.g. 1 May)

-A period (e.g. holiday)

-A certain weekday

-Times are deactivated

This value must always be placed

last, after the date

-(Start)

Date

6HOHFWLRQ[ LQWHUYDO(QWHUWKH

start date for the period

6HOHFWLRQ[ 'DWH(QWHUVSHFLȴF

date)

-End date 6HOHFWLRQ[ LQWHUYDO

Enter the end date for the period

The end date must be later than

the start date

Weekday 6HOHFWLRQ[ RQO\ZHHNGD\V

Enter a weekday.

Example: Selection-x = Date

Only the time for (start) is relevant.

ȏ 6WDUW'DWH 

 5HVXOW-DQXDU\LVDQH[FHSWLRQGDWH

ȏ 6WDUW'DWH 0R

 (YHU\0RQGD\LVDQH[FHSWLRQGD\

ȏ 6WDUW'DWH (YHQ

All days in even months (February, April, June, August, etc.) are

H[FHSWLRQGD\V

Example: Selection-1 = interval

The times for (Start)Date and End date are adjusted.

ȏ 6WDUW'DWH (QGGDWH 

-XQHXQWLOHQGRI-XO\DUHH[FHSWLRQGD\V

IRUH[DPSOHKROLGD\V

ȏ 6WDUW'DWH (QGGDWH 

'HFHPEHUDUHH[FHSWLRQGD\VHYHU\\HDU7LPH(QG

GDWH ZLOOQRWZRUNEHFDXVH-DQXDU\FRPHV

before 23 December.

ȏ 6WDUW'DWH (QGGDWH 

23 December 2016 up to and including 1 January 2017

DUHH[FHSWLRQGD\V

ȏ 6WDUW'DWH (QGGDWH 

Warning!7KLVPHDQVWKDWWKHH[FHSWLRQLVDOZD\VDFWLYH

7KHV\VWHPLVFRQVWDQWO\LQH[FHSWLRQPRGHRUWXUQHGR΋

Example: Selection-1 = Weekday

6HOHFWLRQ :HHNGD\

The times for weekdays are adjusted.

ȏ :HHNGD\ )U

(YHU\)ULGD\LVDQH[FHSWLRQGD\

ȏ :HHNGD\ )U(YHQ

Every Friday in even months (February, April, June, August,

HWFLVDQH[FHSWLRQGD\

ȏ :HHNGD\ 

Warning! 7KLVPHDQVWKDWWKHH[FHSWLRQLVDOZD\VDFWLYH

7KHV\VWHPLVFRQVWDQWO\LQH[FHSWLRQPRGHRUWXUQHGR΋

CS2500

1.3. Adjust setpoints for speeds and

temperatures

Start page > Quick menu > Settings >

Setpoints/Settings

Parameter Function

All settings >

Comfort htg stpt Indicates the temperature setpoint for

comfort operation (daily operation)

Economy htg stpt Indicates the temperature setpoint for

economy operation (nighttime setback)

Sply fan st 1 stpt ΔQGLFDWHVWKHVXSSO\DLUȵRZ

Sply fan st 2 stpt ΔQGLFDWHVWKHVXSSO\DLUȵRZ

Sply fan st 3 stpt ΔQGLFDWHVWKHVXSSO\DLUȵRZ

([WUIDQVWVWSW ΔQGLFDWHVWKHH[WUDFWDLUȵRZ

([WUIDQVWVWSW ΔQGLFDWHVWKHH[WUDFWDLUȵRZ

([WUIDQVWVWSW ΔQGLFDWHVWKHH[WUDFWDLUȵRZ

1.4. Service switch

The service switch is used to stop the unit for servicing.

NB. If the electric coil was active when the unit was

WXUQHGR΋WKHUHZLOOEHVHFRQGVUXQRQWLPHEHIRUH

the unit stops cooling the coil.

Start page > SERVICE SWITCH

Parameter Function

Auto The unit is controlled via time channel

2΋ Service mode, the unit is stationary

1.5. Extract air regulation

$VVWDQGDUGWKHXQLWLVFRQȴJXUHGWRUHJXODWHWKH

temperature via the supply air, but can easily be

FRQȴJXUHGWRUHJXODWHWKLVYLDWKHH[WUDFWDLULQVWHDG

7RbGRWKLVJRLQWRWKHIROORZLQJPHQX

6WDUWSDJH!0DLQPHQX!&RQȴJXUDWLRQ!

&RQȴJXUDWLRQ!7PSFRQWUROPRGH

Parameter Function

Supply Temperature regulation is controlled by

the supply air temperature

([WU6SO\& Temperature regulation is controlled as

DIXQFWLRQRIWKHH[WUDFWDQGVXSSO\DLU

VHQVRUVDQGPDLQWDLQVWKHVHWH[WUDFWDLU

temperature

$IWHUPDNLQJDFKDQJHLQDFRQȴJXUDWLRQPHQX5(67$57

6WDUWSDJH!0DLQPHQX!&RQȴJXUDWLRQ

!&RQȴJXUDWLRQ!5HVWDUWUHTXLUHG!

Execute

RESTART

To adjust limitations to the inlet temperature in the case

RIH[WUDFWDLUUHJXODWLRQ

Start page > Quick menu > Settings >

Setpoints/Settings

Parameter Function

Supply tmp min Indicates the lowest permitted supply air

temperature

6XSSO\WPSPD[ Indicates the highest permitted

supply air temperature,

1.6. &KDQJLQJWKHȵRZGLVSOD\XQLWV

The standard setting for the unit is m3/h, but can easily

be changed to l/s. When the units are changed, the

VHWSRLQWYDOXHVIRUDLUȵRZDUHDXWRPDWLFDOO\UHFDOFXODWHG

6WDUWSDJH!0DLQPHQX!&RQȴJXUDWLRQ!

&RQȴJXUDWLRQ!)ORZGLVSOD\

Parameter Function

No Not used

l/s 6KRZVWKHDLUȵRZLQOV

m3/h 6KRZVWKHDLUȵRZLQP3/h

$IWHUPDNLQJDFKDQJHLQDFRQȴJXUDWLRQPHQX5(67$57

6WDUWSDJH!0DLQPHQX!&RQȴJXUDWLRQ

!&RQȴJXUDWLRQ!5HVWDUWUHTXLUHG!

Execute

RESTART

1.7. Alarm handling

If an alarm has been triggered, it will be shown by the

ȵDVKLQJDODUPV\PERO<RXFDQJHWPRUHLQIRUPDWLRQE\

pressing the alarm button. To reset the alarm, press the

DODUPEXWWRQWZLFHDQGVHOHFWȇ&RQȴUP5HVHWȇDQGWKHQ

([HFXWHLQWKHPHQX

CS2500

Andere Handbücher für ProNordic CS2500

Inhaltsverzeichnis

Andere Flexit Controller Handbücher

Flexit

Flexit CS2000 V2 Bedienungsanleitung

Flexit

Flexit CS2000 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung