Flexsolar FLC-E3-200200-2 Bedienungsanleitung
1
Suitable for all electronic porducts:
Tablet IPhone Mobile IPod PSP
• Tablets, iPad, iPhone, iPad, etc.
• All Phones(Samsung, Huawei, MIUI, etc)
• MP3 MP4 electronic devices
• Digital photo frames, mini speakers
• PSP, Switch, GBA game machines
• Handheld GPS navigation systems
Front View (unfolded) Back View (unfolded)
User Manual
Please read carefully before using
20W FLEXIBLE SOLAR CHARGER
20W
Flexible
SolarChar ger
Model:E20
PartNo. : FLC-E3-200200-2
USBQC3.0 Output:
5V-3A/ 9V-2A / 12V-1.5A(MAX)
DCOutput: 19V/1.1A(MAX)
www.flexsolarenergy.com
20W FLEXIBLE SOLAR CHARGER (E20, FLC-E3-200200-2)
1. GENERAL Pg.02
4. WHAT IS IN BOX Pg.04
6. MAINTENANCE
2. PRODUCT OVERVIEW Pg.02
2.1 20W FLEXIBLE SOLAR CHARGER (E20, FLC-E3-200200-2)
2.2 Unfolded View of the 20W Flexible Solar Charger
7. WARRANTY STATEMENT
8. PRODUCT MARK
5. OPERATION
5.1 Charging Electronic Devices
Pg.05
Pg.05
Pg.07
Pg.04
3. SPECIFICATIONS
3.1 Parameter of E20
3.2 Output and Accessories of E20
Pg.03
TABLE OF CONTENTS
GENERAL
Thanks for purchasing this FLEXSOLAR® product. Before operating, please
read these instructions carefully. This intruction manual contains informa-
tion for safe use and maintenance of the product. Before using a solar
photovoltaic system (including cable, power station or other electric
equipment), the user should be familiar with the mechanical and electrical
requirements for photovoltaics systems.
FLEXSOLAR solar panel are made of monocrystalline solar cells in series
with high efficicency, high transmission rate, and antiaging EVA. They are
designed for easy use, extended longevity and portable operation.
Please keep this instruction manual in a safe place of future reference.
The manufactuer does not accept responsibility for any damages due to
not following these instructions.
PRODUCT OVERVIEW
2
SPECIFICATIONS
Open Circuit Voltage (Voc | V)
20 W
Rated Peak Power (Pmax | W)
23.7 V
Short Circuit Current (Isc | A) 1.1 A
Maximum Power Voltage (Vmp | V) 19.8 V
Maximum Power Current (Imp | A) 1.0 A
Module Efficiency (%) 24%
Solar Cell Type Monocrystalline
Power tolerance ± 10%
Temperature Co-efficient (Pmax) -0.45%/K
Temperature Co-efficient (Voc) -0.32%/K
Temperature Co-efficient (Isc) +0.02%/K
NOCT (Air 68°F/20°C, Sun 0.8kW/m², wind 1m/s) 113±35.6°F (45±2°C)
Weight 21.2 ounces (600 g)
Operation Temperature -4°F to 149°F (-20°C to 65°C )
IP Rating IP67
Parameter of E20
Unfolded View of the 20W Flexible Solar Charger
3
23.5 inch / 596 mm
11.0 inch / 279 mm
11.0 inch / 279 mm
7.8 inch / 198 mm
1.4 inch / 35 mm
20W
Flexible
SolarCharger
Model:E20
PartNo.: FLC-E3-200 200-2
USBQC3.0 Output:
5V-3A/9V-2A / 12V-1.5A(M AX)
DCOutput:19V/1.1A(M AX)
www.flexsolarenergy.com
Charging Electronic Devices
Unfold the solar panel under direct sunlight, connect flexible solar charger
with the electronic device through power output cable (see picture 1), the
charging signal will be shown on your electronic device; or if the sunlight is
not sufficient, the solar charger can be connected with power bank for
energy storage.
• When the charger is connected as
instructed above, the electronic device
shows: “Charging is temporary
unavailable” or no sign for charging.
Please pull out the output cable and
reconnect, or adjust the angle of the
charger to expose more sunlight.
Make sure you have all the following items included in the package. If any
item is damaged or missing, contract us.
Output and Accessories of E20
// /
/ /
Category Location Cable
Length Wire Sep-
cification RemarkDescription
Output
Ports
From
controller
box Built In
Accessories 2Carabiner
Carabiner
WHAT IS IN BOX
E20
OPERATION
4
Picture 1
DC Port USB Port
Controller box of back view
LED
Middle LED
Red light once get light
LED indicate :
USB QC 3.0
DC 5521
Clean the surface of the solar panel when needed. Always use a soft
sponge or cloth for cleaning. A mild, non-abrasive cleaning detergent may
be used to remove stubborn dirt. Don’t clean when the panel surface is
hot.
FLEXSOLAR® warrants to the original consumer purchaser that the
FLEXSOLAR® product will be free from defects in workmanship and material
under normal consumer use during the applicable warranty period
identified in the ‘Warranty Period’ section below, subject to the exclusions
set forth below. This warranty statement sets forth FLEXSOLAR® total and
exclusive warranty obligation. We will not assume, nor authorize any
person to assume for us, any other liability in connection with the sale of
our products.
The warranty period is 24 months. In each case, the warranty period is
measured starting on the date of purchase by the original consumer
purchaser. The sales required in order to establish the start date of the
warranty period.
Clean solar panels more frequently during drier months, as they may
become covered in dust more quickly. A pressure washer is not
recommended.
Caution: Observe the maintenance instructions for all components used in
the system, such as support frames, charge controller, batteries, etc.
• The mobile USB device will indicate it is charging as well as the LED lights
on the solar panel.
MAINTENANCE
WARRANTY STATEMENT
Warranty Period:
FLEXSOLAR® will repair or replace (at FLEXSOLAR® option) any FLEXSOLAR®
product that fails to operate during the applicable warranty period due to
defect in workmanship or material. If a valid claim is made during the
applicable period, FLEXSOLAR®, at its option, will either (1) replace the
product, or (2) exchange the product with a product that is of equal value.
A replacement product assumes the remaining warranty of the original
product or 60 days from the date of replacement, whichever is greater.
Customer is responsible for the return shipping costs.
Remedy:
5
The warranty on FLEXSOLAR® products is limited to the original consumer
purchaser.
Limited to Original Consumer Buyer:
FLEXSOLAR® warranty does not apply to (I) any product that is misused,
abused, modified, damaged by accident, or used for anything other than
normal consumer use as authorized in FLEXSOLAR® current product
literature, or (II) any product purchased through an online auction house.
Exclusions:
To obtain warranty service, you must contact our customer service team.
If our customer service team determines that further assistance is
required, they will give you a Return Material Authorization (“RMA”) number
and will provide you with return instructions. You must properly package
the product, clearly marking the RMA number on the package and
including proof of your purchase date with the product. We will process
your return and send your repaired or replacement product to you in
continental North America.
How to Receive Service:
The foregoing provisions state FLEXSOLAR® entire liability, and your exclusive
remedy, for any breach of warranty, express or implied.
IN NO EVENT WILL FLEXSOLAR® BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES ARISING FROM ANY USE OR MALFUNCTION OF ANY
FLEXSOLAR PRODUCT, OR FROM ANY BREACH OF WARRANTY, INCLUDING
DAMAGE TO OTHER DEVICES. IN NO EVENT WILL FLEXSOLAR’S LIABILITY FOR ANY
CLAIM, WHETHER IN CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND
STRICT LIABILITY) OR UNDER ANY OTHER THEORY OF LIABILITY, EXCEED THE
AMOUNT PAID BY YOU FOR THE FLEXSOLAR® PRODUCT.
Some states or provinces do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion
may not apply to you.
Exclusive Remedy; Limitation of Liability:
6
Model Type FLC-E3-200200-2
Max Peak Power (Pmax | W) 20W
Maximum Power Point Voltage (Vmp | V) 19.8V
Maximum Power Point Current (lmp | A) 1.0A
Open Circuit Voltage (Voc | V) 23.7V
Short Circuit Current (Isc | A) 1.1A
Normal Operating Cell Temperature (NOCT) 113°F/45℃
Temperature Range(℃) -68°F~149°F (-20℃~65℃)
Power Tolerance ±10%
Application Class Class A
Net Weight Ounce / (g) 21.2 ounces / (600 g)
Dimensions (unfolded) mm / in 596 x 279 x 3 mm / 23.5 x 11 x 0.1 in
Dimensions (folded) mm / in 279 x 198 x 35 mm / 11 x 7.8 x 1.4 in
Product Label:
PRODUCT MARK
Only qualified personnel should install or perform
maintenace work on these modules.
All technical data at Standard Test Condition (STC)
Standard Test Condition (E = 1000W/m2, Tc = 77°F/25℃, AM 1.5)
WARNING ELECTRICAL HAZARD
This unit produces electricity if exposed to light.
Follow all applicable electrical safety precautions.
Don’t disconnect when loading.
Don’t damage or scratch the suface of the modules.
7
8
UPC code:
Serial Number:
INNOTECH ENTERPRISE LLC
Customer Support:
800-620-1249
flexsolarenergy.com
Innotech Enterprise LLC is a wholly subsidiary of Flextech Company.
FLEXSOLAR® is a registered trademark of Flextech Company.
®All rights reserved.
©2013-2024 FLEXSOLAR® is a trademark licensed for use by
Flextech Company and registered in the U.S.
M-FLC-E3-200200-2
785249 51933 8
9
Geeignet für alle elektronische Produkte:
Tablette IPhone Mobiltelefon IPod PSP
• Tablets, iPad, iPhone, iPad, etc.
• Alle Telefone (Samsung, Huawei, MIUI, etc.)
• Elektronische MP3-MP4-Geräte
• Digitale Fotorahmen, Mini-Lautsprecher
• PSP, Switch, GBA-Spielgeräte
• Handgehaltene GPS-Navigationssysteme
Vorderansicht (aufgeklappt) Rückansicht (aufgeklappt)
Benutzerhandbuch
Bitte vor der Benutzung sorgfältig lesen
20W FLEXIBLES SOLAR-LADEGERÄT
20W
Flexible
SolarChar ger
Model:E20
PartNo. : FLC-E3-200200-2
USBQC3.0 Output:
5V-3A/ 9V-2A / 12V-1.5A(MAX)
DCOutput: 19V/1.1A(MAX)
www.flexsolarenergy.com
20W FLEXIBLES SOLAR-LADEGERÄT (E20, FLC-E3-200200-2 )
1. ALLGEMEINES Pg.10
4. WAS IST IM KASTEN Pg.12
6. WARTUNG
2. PRODUKTÜBERSICHT Pg.10
2.1 20W FLEXIBLES SOLAR-LADEGERÄT (E20, FLC-E3-200200-2)
2.2 Aufgeklappte Ansicht des flexiblen 20-W-Solarladegeräts
7. GARANTIEERKLÄRUNG
8. PRODUCT MARK
5. BETRIEB
5.1 Elektronische Geräte aufladen
Pg.13
Pg.13
Pg.15
Pg.12
3. SPEZIFIKATIONEN
3.1 Parameter von E20
3.2 Leistung und Zubehör von E20
Pg.11
INHALTSVERZEICHNIS
ALLGEMEINES
Vielen Dank für den Kauf dieses FLEXSOLAR®-Produkts. Vor der Inbetrieb-
nahme, lesen Sie bitte diese Anleitung sorgfältig durch. Diese Gebrauch-
sanweisung enthält Informationen zum sicheren Gebrauch und zur
Wartung des Produkts. Vor der Verwendung einer Photovoltaikanlage
(einschließlich Kabel, Kraftwerk oder andere elektrische Geräte), sollte der
Benutzer sollte der Benutzer mit den mechanischen und elektrischen
Anforderungen an Photovoltaikanlagen vertraut sein.
FLEXSOLAR Solarmodule bestehen aus monokristallinen Solarzellen in Serie
mit hoher Effizienz, hoher Übertragungsrate und Anti-Aging EVA. Sie sind für
eine einfache Verwendung, lange Lebensdauer und tragbaren Betrieb.
Por favor, guarde este manual de instrucciones en un lugar seguro para
futuras consultas. El fabricante no se hace responsable de los daños
debidos al incumplimiento de estas instrucciones.
PRODUKTÜBERSICHT
10
Inhaltsverzeichnis
Sprachen:
