Docking Instructions
1. Pull the handle on the unit upwards to extend the latch.
2. Position the PlayStation 3 so that its connectors are facing the
PS3DOC/PS3DOC-1.
3. Pull the HDMI, Composite/Audio, and power pigtails from the pocket
and connect to the appropriate ports on the PlayStation 3.
4. Tuck the excess pigtail back into the pocket.
5. Slide the PlayStation 3 back against the PS3DOC/PS3DOC-1.
6. Lock the unit in place by pressing the handle wand down.
Power Requirements
The PS3DOC utilizes a 3-prong power cable to route power to the PlayStation 3. It uses an
A/C fan to assist with cooling. We recommend referring to Sony for the latest information
regarding power requirements.
The PS3DOC-1 utilizes a 2-prong power cable to route power to the PlayStation 3. It uses
an A/C fan to assist with cooling. We recommend referring to Sony for the latest
information regarding power requirements.
At the time of the original issue of this manual, Sony recommended a 120V power supply
capable of handling 380 watts of power. In an aircraft, this will require an inverter (not
included).
It is recommended that the power switch on the PS3DOC/PS3DOC-1 be in the off position
when docking the PlayStation 3. After docking, the switch should be moved to the on
position to supply power to the PlayStation 3.
