Flight Sounds FSX DUAL Bedienungsanleitung

User Manual for:

FSX DUAL Intercom

User Manual applies to:

• G/A (General Aviation) Model –gen 2

• M (Military) Model –gen 2

2021-08-26 FLIGHT SOUNDS

Version 1.0 www.flightsounds.com

[2] 
Contents 
Important Information 3 
Description 4 
1 Requirements 5 
2 Product Items Supplied 5 
3 Key Features and Specifications 5 
4 Product Version 6 
Set-up Guide 7 
1 Operating Set-Up —Windows 10/8/7/Vista 7 
1.1 Basic Setup 7 
1.2 Volume and Mute Settings 9 
2 Operating Set-Up —Mac OS X 12 
2.1 Basic Setup 12 
2.2 Volume and Mute Settings 14 
FSX DUAL Operation 15 
1 User Operation 15 
Support and Disclaimer Info 16 
1 Technical Support and Contact Info 16 
2 Limited Warranty 16 
3 Terms and Conditions of Service 16 
 

[3]

1. Important Information

Thank you for purchasing the FSX DUAL adapter. Please take a

moment to read through this ‘important information’ chapter before

proceeding. Users should also refer to the Support and Disclaimer

Information chapter for detailed writings regarding warranty & support

information and other terms and conditions.

WARNING:

Please be aware that the FSX DUAL adapter features internal audio

amplifiers. These allow the computer audio strength to be boosted to

the levels required for driving ‘high-impedance’ Aviation Headsets.

Users should therefore not connect ‘low-impedance’ (ie: non-

Aviation) headsets to the device as damage could result.

Cautions and basic care instructions

•Ensure that the FSX DUAL volume is turned down before connecting

the Headset.

•Users should bring the devices volume up gradually until a

comfortable audio volume has been achieved. High audio volumes

and prolonged use can result in hearing loss.

•Do not attempt to disassemble or alter any part of this device.

•Stop operating the device immediately if it emits smoke or noxious

fumes.

•Do not allow the device to come into contact with, or become

immersed in water or other liquids.

•Do not store the device in humid or dusty environments.

•Avoid using, placing or storing the device in places subject to strong

sunlight or high temperatures, such as the dashboard or trunk of a

car.

[4]

•Be careful not to subject the device to strong impacts.

•Avoid placing the device in environments where it may be subject to

strong electric and/or magnetic fields.

•Clean the device with a soft, absorbent cloth. Do not use cleaning

substances containing alcohol, benzene, thinners or other flammable

substances.

2. Description

Flight simulation will never be ‘as real as it gets’ unless it ‘sounds and

feels’ authentic. The FSX DUAL adapter helps to achieve this goal by

bringing flight simulation audio into the 21st century. Pilots, gamers or

any aviation enthusiast can now use their aviation headsets with any

USB enabled computer.

FSX DUAL is designed to be as easy to use as possible –no additional

software, no batteries, no external power sources - just one standard

USB cable. Users can quite simply ‘plug and play’. The device features

two channels, allowing for inter-communication between two separate

headsets. Each user has their own volume control option and also a

separate squelch control which allows for varying degrees of

background noise elimination. When users have finished working with

the device, simply unplug it, and the computer will revert back to its

original audio settings.

Note: Plug in FSX DUAL before launching any programs you intend to

use it with.

[5]

2.1 Requirements

•One or two Aviation Headsets with either:

- PJ-068 & PJ-055B connectors –General Aviation (G/A) version

- U-174/U connector –Military (M) version

•A computer with an available USB port or dedicated USB hub.

•Mac OS X or Windows 10/8/7/Vista operating system.

2.2 Product Items Supplied

•FSX DUAL –gen 2

•USB cable

NB: No additional driver software is supplied with the product. The

device has been designed for ‘plug & play’ operation with Windows

10,8,7, Vista and Mac OS X.

2.3 Key Features and Specifications

•USB 1.1 and 2.0 compatible

•Plug and Play with Windows 10/8/7/Vista and Mac OS X

•Supports Mono and Stereo (G/A version only) Headsets

•Accepts PJ-068 & PJ-055B plugs (G/A) or U-174/U plugs (H)

•-G/A version is compatible with aviation electret microphone

types and some dynamic microphone types

•-M version compatible with low impedance dynamic

microphones and electret microphones

•Powers microphone bias from USB port (no external power

needed)

•Zero delay voice feedback (intercom) feature

[6]

•Output frequency response (20Hz-20KHz)

•Volume and squelch (background noise elimination) controls on

two separate channels

•Separate external audio volume control (for radio volume

simulation)

•Electrical Power Switch with LED indicator

•Operating Temperature from -15˚C to 70˚C.

2.4 Product Version

•This User Manual applies only to FSX DUAL - generation 2

products.

•This User Manual is not applicable to the FSX DUAL -

generation 1 product.

•Users can determine the generation of FSX DUAL by looking at

the rear panel of the device, and identifying the correct version as

per the figures below:

FSX DUAL - Generation 1 FSX DUAL - Generation 2

Figure 2.1: Determining the FSX DUAL generation.

[7]

3. Set-up Guide

3.1 Operating Set-Up —Windows 10/8/7/Vista

This section reviews how to set up the FSX DUAL adapter for use with

a PC equipped with the Microsoft Windows 10, 8, 7, or Vista operating

systems.

When the installation is complete, the FSX DUAL is ready to use.

3.1.1 Basic Setup

Follow these steps to set up the FSX DUAL adapter for use with

Windows 10/8/7/Vista.

Step 1: Connect one end of the USB cable (supplied) to the FSX DUAL

and the other end to an available USB port (or hub) on the PC. After

the FSX DUAL adapter is connected to the PC, the standard Windows

10/8/7/Vista driver installs automatically to the PC. A custom driver

for the FSX DUAL adapter is unnecessary.

Step 2: Open the Control Panel from the Start menu (Start → Control

Panel). Open Hardware and Sound tab. Open Sound tab.

(ie: Control Panel\Hardware and Sound\Sound)

Step 3: Select the playback tab and confirm the “FSX DUAL”

appearance as the default playback device, as shown in Figure 3.1.

Step 4: Select the recording tab and confirm the “FSX DUAL”

appearance as the default recording device, as shown in Figure 3.2.

[8]

Figure 3.2:

Sound - Recording Tab

(Win 10/8/7/Vista)

Figure 3.1:

Sound - Playback Tab

(Win 10/8/7/Vista)

[9]

3.1.2 Volume and Mute Settings

Follow these steps to configure the volume settings for headphones,

microphone, and the recording options.

To set the headphone volume:

Step 1: Open the Control Panel from the Start menu (Start → Control

Panel). Open Hardware and Sound tab. Open Sound tab.

(ie: Control Panel\Hardware and Sound\Sound)

Step 2: Open the headphones properties of the “FSX DUAL” from the

Sound options and select Levels tab, as Figure 3.3 illustrates.

Step 3: Set the output volume, mute, and the balance for headphones

from 0 to 100.

[10]

Figure 3.3: Headphones Properties - Levels Tab (Windows 10/8/7/Vista)

Set the headphone

output volume,

mute and balance

(Windows

8/7/Vista)

Inhaltsverzeichnis

Beliebte Gegensprechanlage Handbücher anderer Marken

Bticino

Bticino LINEA 3000 Bedienungsanleitung

MSI

MSI MSI-140 Bedienungsanleitung

golmar

golmar Stadio Plus Bedienungsanleitung

CyberData

CyberData 011211 series Handbuch

Vidos

Vidos duo M1021 Bedienungsanleitung

Vimar

Vimar ELVOX 7539/E Bedienungsanleitung

SSS Siedle

SSS Siedle BTSV 850-03 Bedienungsanleitung

Dahua

Dahua VTO Series Bedienungsanleitung

Elvox

Elvox 5651 Bedienungsanleitung

Videx

Videx VIDEOKIT Series Bedienungsanleitung

Rocom

Rocom Doortello Business FW T2.05W2.04 Bedienungsanleitung

Viking

Viking E-35-EWP Bedienungsanleitung

Safeguard Supply

Safeguard Supply LRA-EX1000 Bedienungsanleitung

SSS Siedle

SSS Siedle BFCV 850 Series Bedienungsanleitung

GRD

GRD MAX V2 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Aiphone

Aiphone IE-8MD Bedienungsanleitung

Perel

Perel EDB4 Bedienungsanleitung