Safety Instruction for Xtender Machines
Please be fully aware of safety instructions described in this manual to prevent
any possible danger. Please note that we shall not take any responsibility or
liability for any loss or damage that occurs due to improper operation of controls.
For your safety you should read this manual before operating the equipment.
①Make sure that electric power supply matches the units specification
and capacity first. Check the cables before connecting the power
supply.
②Before connecting cables to power supply, you should ground in
accordance with your local safety regulation.
③Before contact with interface ports, make sure that power supply is
not connected.
④Before inspecting the Xtender for maintenance or repair, first shut off
power supply and wear safety gear in order to avoid risk of hazardous
electric shock.
⑤While equipment is running or connected with power supply, any
contact with physical or conductive material and interior parts of the
machine are strictly prohibited.
⑥Sulfuric acid is a highly corrosive substance and could result in burn
injury. Don’t attempt to touch or drink electrolyte.
⑦Install the units in an area with adequate air flow.
⑧Do not allow impact to batteries during charging or discharging.
D A N G E R
DANGER
6
