FLIR A700 Series Bedienungsanleitung

Getting started

FLIR A400 series,

FLIR A700 series

Table of contents

1 List of contents ............................. ... . . .. . . . . . . . . ................. . .. 1

2 Illustrations .... . ... . . . . . . . . ................. ... . . .. . . . . . . . . ................. . .. 2

3 EN-US English ..... ... . . .. . . . . . . . . ................. . .. . . . . . . . . . ................ 5

4 DE-DE Deutsch ....... . . . . . ... . ................ . . .. . . . . . .. . ................. . .. 9

5 ES-ES Español. . . .. . ................ . . .. . . . . . .. . . ................ . ... . . . . . . . . .14

6 FR-FR Français ....... . . . . . .. . . ................ . ... . . . . . . . . ................. ..19

7 IT-IT Italiano .................. . . . . . .... ................ . . . . . .. . . ...............24

8 JA-JP 日本語.. .... ................ . . . . . .. . . ................ . .. . . . . . . . . . ........29

9 KO-KR 한국어. . . . . ................ ... . . .. . . . . . .. . . ................ . ... . . . . . . . . .34

10 PT-PT Português.......... . . . . . .................... . . . . . ... ................. . .38

11 ZH-CN 简体中文 ........... . . . . . . . . ................. . .. . . . . . . . . . ...............43

12 ZH-TW 繁體中文 ........... . . . . . .................... . . . . . ... ................. . .47

#T810482; r. AA/64581/64581; mul iii

1 List of contents

• Infrared camera.

Depending on the model, the camera is delivered:

◦ as a bare camera (FLIR A400/A700)

◦ mounted in an environmental housing (FLIR A400f/A700f), or

◦ mounted in a pan/tilt unit (FLIR A400pt/A700pt).

• Ethernet cable M12 to RJ45F (0.3 m), P/N T911869ACC (FLIR A400/A700).

• Installation kit (FLIR A400f/A700f and FLIR A400pt/A700pt).

• Printed documentation including the username and password for log in to the

web interface of the camera.

Note FLIR Systems reserves the right to discontinue models, parts or acces-

sories, and other items, or to change specifications at any time without prior

notice.

#T810482; r. AA/64581/64581; mul 1

2 Illustrations

Note Explanations of the illustrations are provided in each language section.

Figure 2.1 View from the rear: FLIR A400/A700

Figure 2.2 View from the front: FLIR A400/A700

#T810482; r. AA/64581/64581; mul 2

2 Illustrations

Figure 2.3 FLIR A400pt/A700pt Figure 2.4 FLIR A400f/A700f

MQTT

Figure 2.5 Example system overview: early fire detection

#T810482; r. AA/64581/64581; mul 3

2 Illustrations

Figure 2.6 Example system overview: condition monitoring

Figure 2.7 Example system overview: research and development

#T810482; r. AA/64581/64581; mul 4

3 EN-US English

3.1 Read the manual before use

Go to the following website to read or download the

manual:

http://support.flir.com/resources/chxa

3.2 Extend your product warranty

• 2 years camera warranty

To activate your extended warranty, go to http://support.flir.com/camreg.

Note Registration must be completed within 60 days of purchase.

3.3 Download FLIR software

FLIR Systems provides freeware and licensed software for image editing, video

processing, thermal analysis, and reporting.

To download FLIR Thermography software, go to http://www.flir.com/support.

3.4 Training

For training resources and courses, go to

http://www.flir.com/support-center/training.

3.5 Customer support

Do not hesitate to contact our Customer Support Center at http://support.flir.com

if you experience problems or have any questions about your product.

#T810482; r. AA/64581/64581; mul 5

3 EN-US English

3.6 FLIR A400/A700

3.6.1 Quick start guide

You can power the camera by using either the power I/O connector (18–56 V DC)

or the Ethernet/power over Ethernet (PoE) connector (36–56 V DC) of the cam-

era. See Figure 2.1 View from the rear: FLIR A400/A700, page 2.

1. On the computer to be used for managing the camera, download FLIR IP

Config from http://support.flir.com, and then install it.

2. Connect the camera to power and the network. Do one of the following:

a. Connect the power cable between the camera and a power source (for

pin configurations, refer to the user manual of the FLIR A400/A700 ser-

ies). Connect the network cable to the camera, and then either directly

to the computer or to an Ethernet switch on the same network as the

computer.

b. Connect the PoE cable to the camera, and then to a PoE switch on the

same network as the computer.

3. The camera is set to use DHCP. On the computer, use FLIR IP Config to

identify the camera on the network, and change the IP settings if necessary.

4. On the computer, do one of the following:

a. Double-click on the camera in FLIR IP Config.

b. Type the IP address of your camera into the address bar of a web

browser.

This displays the login view.

5. Log in using the provided username and password. This displays the web in-

terface of the camera.

6. Use the web interface to configure the camera. For Smart Sensor cameras,

use the web interface to also add measurements and set alarms.

3.6.2 View from the rear

See Figure 2.1 View from the rear: FLIR A400/A700, page 2.

1. Power/error indicator LED (blue/red).

2. Ethernet communication indicator LED (green).

3. Ethernet/PoE connector, X-coded.

4. Power I/O connector, A-coded.

5. Antenna.

6. RS232/485 connector, A-coded.

#T810482; r. AA/64581/64581; mul 6

3 EN-US English

7. Factory reset button. For factory reset modes, refer to the user manual of the

FLIR A400/A700 series.

3.6.3 View from the front

See Figure 2.2 View from the front: FLIR A400/A700, page 2.

8. Infrared sensor.

9. Visual camera.

10. LED lamps.

3.7 FLIR A400f/A700f

When delivered, the camera is already mounted in an environmental housing.

The housing with the camera requires PoE class 4 (25 W) to operate as intended.

Connect the unit to power and the network:

1. Connect a PoE cable (PoE class 4, 25 W) to the connector gland on the bot-

tom of the housing device. Use the strain-relief clamp that is delivered with

the camera.

2. Connect the other end of the PoE cable to a PoE switch.

3. Follow the steps in section 3.6.1 Quick start guide, starting at step 3.

3.8 FLIR A400pt/A700pt

When delivered, the camera is already mounted in a pan/tilt (P/T) unit. The mas-

ter selection mode is set to Camera Master, which means that the camera con-

trols the P/T.

Connect the unit to power and the network:

1. Unscrew the two bolts in the cover to the base unit by using a 4 mm hex key.

2. Pull a network cable and a power cable through either the parapet bracket or

the wall mount bracket.

3. Pull both cables through the cable glands in the P/T base unit. Make sure

that the cable glands are closed tightly.

4. Connect the network cable to the RJ45 port, and the power cable to the

power port. Make sure to connect the AC power cable correctly. After the ca-

bles are connected, close the hatch and then tighten the bolts.

5. Connect the network cable to a computer or an Ethernet switch, and connect

the power cable to a power source.

6. Follow the steps in section 3.6.1 Quick start guide, starting at step 3.

#T810482; r. AA/64581/64581; mul 7

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere FLIR Wärmebildkamera Handbücher

FLIR

FLIR CX series Bedienungsanleitung

FLIR

FLIR E series Bedienungsanleitung

FLIR

FLIR K1 Bedienungsanleitung

FLIR

FLIR E series Bedienungsanleitung

FLIR

FLIR FC-Series S Bedienungsanleitung

FLIR

FLIR C Series Bedienungsanleitung

FLIR

FLIR FLIR T5 series Bedienungsanleitung

FLIR

FLIR PathFindIR Bedienungsanleitung

FLIR

FLIR FLIR T5 series Bedienungsanleitung

FLIR

FLIR ThermaCAM SC640 Bedienungsanleitung

FLIR

FLIR C Series Bedienungsanleitung

FLIR

FLIR FB-Series O Handbuch

FLIR

FLIR E-EST Series Bedienungsanleitung

FLIR

FLIR Scout Bedienungsanleitung

FLIR

FLIR G300 A Bedienungsanleitung

FLIR

FLIR Scout Bi-Ocular Bedienungsanleitung

FLIR

FLIR FLIR AX8 Bedienungsanleitung

FLIR

FLIR ZENMUSE XT2 Bedienungsanleitung

FLIR

FLIR EST Series Bedienungsanleitung

FLIR

FLIR ThermaCAM E320 Bedienungsanleitung

FLIR

FLIR T43 Bedienungsanleitung

FLIR

FLIR K Series Bedienungsanleitung

FLIR

FLIR ThermaCAM BX320 Bedienungsanleitung

FLIR

FLIR TG267 Bedienungsanleitung

Beliebte Wärmebildkamera Handbücher anderer Marken

Hikmicro

Hikmicro B20 Bedienungsanleitung

BST

BST BT-72 Bedienungsanleitung

CBC

CBC EN7-S02T Bedienungsanleitung

Satir

Satir YRH600 Bedienungsanleitung

TESTO

TESTO 882 Bedienungsanleitung

TECPEL

TECPEL TIG-320 Bedienungsanleitung

SKF

SKF TKTI 21 Bedienungsanleitung

TESTO

TESTO 885 Bedienungsanleitung

InfiRay

InfiRay AT300 Series Bedienungsanleitung

InfiRay

InfiRay AT Series Bedienungsanleitung

Videotec

Videotec MAXIMUS MVXT Bedienungsanleitung

Guide Sensmart

Guide Sensmart D384M Bedienungsanleitung

NBN

NBN FLIR A6 Series Bedienungsanleitung

WORKSWELL

WORKSWELL SAFETIS Bedienungsanleitung

Major tech

Major tech MTi11 Bedienungsanleitung

COHU

COHU 5935-1000/T100 Bedienungsanleitung

MikroScan

MikroScan 7600PRO Bedienungsanleitung

Chauvin Arnoux

Chauvin Arnoux C.A 1879 Bedienungsanleitung