Floe VSD 5000 Bedienungsanleitung

FLOE VSD 5000

PONTOON

LIFT

P/N 511-50085-02 LIFT FRAME

WITH PATENTED EASY LEVEL LEG SYSTEM

ASSEMBLY INSTRUCTIONS

©Manufactured by:

Floe International Inc.

48473 State Hwy. 65

McGregor, MN 55362

www.floeintl.com

Instruction P/N 611

50085

Issued 03/13/19

Required Tools

Card Contents (511-04255-00)

Step

Part Numbers

QTY Descriptions Torques

001-70215-00

001-70217-00

001-70210-00

001-70219-00

001-71023-00

001-76072-00

HHCS, 1/2-13 x 3” ss 18-8

HHCS, 1/2-13 x 3 1/2” ss 18-8

HHCS, 1/2-13 x 1 3/4” ss 18-8

HHCS, 1/2-13 x 4” ss 18-8

FLAT WASHER, .5 ID x .75 OD ss

NUT, 1/2-13 ALUMINUM NYLOCK

60 ft. lbs.

45 ft. lbs.

60 ft. lbs.

001-70218-00

001-76072-00

HHCS, 1/2-13 x 3 3/4” ss 18-8

NUT, 1/2-13 ALUMINUM NYLOCK

20 ft. lbs.

001-76071-00

001-70115-00

001-70117-00

NUT, 3/8-16 ALUMINUM NYLOCK

HHCS, 3/8-16 x 3” ss 18-8

HHCS, 3/8-16 x 3 1/2” ss 18-8

35 ft. lbs.

001-70124-00

001-70127-00

001-76071-00

001-70121-00

HHCS, 3/8-16 x 5 1/2” ss 18-8

HHCS, 3/8-16 x 7” ss 18-8

NUT, 3/8-16 ALUMINUM NYLOCK

HHCS, 3/8-16 x 4 1/2” ss 18-8

35 ft. lbs.

001-70209-00

001-70245-00

001-76350-00

HHCS, 1/2-13 x 1 1/2” ss 18-8

HHCS, 1/2-20 x 1 3/4” ss 18-8

NUT, 1/2-13 ALUMINUM

45 ft. lbs.

50 ft. lbs.

Hardware Card Contents

continued

Step

Part Numbers

QTY Descriptions Torques

001-70211-00

001-76072-00

001-70227-00

002-04140-00

007-06201-00

HHCS, 1/2-13 x 2” ss 18-8

NUT, 1/2-13 ALUMINUM NYLOCK

HHCS, 1/2-13 x 7” ss 18-8

HOLDER, CABLE

SHEAVE, 3” FRONT CABLE ½” ID

45 ft. lbs.

001-70109-00

001-71017-00

001-76071-00

001-70124-00

001-76071-00

HHCS, 3/8-16 x 1 1/2” ss 18-8

3/8” SAE FLAT WASHER

NUT, 3/8-16 ALUMINUM NYLOCK

HHCS, 3/8-16 x 5 1/2” ss 18-8

NUT, 3/8-16 ALUMINUM NYLOCK

10 ft. lbs.

35 ft. lbs.

Assembly Image Definitions

Tighten without Clamping

Centerline

Hardware Card # Check, Inspect, Verify

Important Notice

IMPORTANT NOTE:

DO NOT USE IMPACT WRENCH

WHEN ADJUSTING THE EASY

LEVEL LEGS

Warnings

Tips



Torque nuts to specification, not bolts.

 Place parts and fasteners in designated locations prior to each step.

 Before tightening fasteners to specified torque, ensure that the lift is square.

 Measure from corner to corner (A to C/B to D) to verify that the lift is square.

 Measure distance between corner posts (A to B, B to C, C to D, A to D) above frame beam and at the

top of the corner post to verify that the lift is square.

 Ensure that the lift is level and square before proceeding to install the V-Brace or Ball Screw Tube.

 Assemble cradle clamps with given bolt and nut before installing onto cradle beam.

 Use a marker to denote fasteners which have been tightened to the specified torque.

 Read instructions and understand them before attempting assembly.



Lift Dimensions

Length: 162”

Width: 134 3/8”

Height: 120”

Work Space

Level work space

Allow space to organize parts

Material

Blocking may be anything 10”-15” in height.

(5 gallon bucket, jack stands, blocks, saw horses)

QTY

4 (2 for each side)

Purpose

Blocking used to support lift during assembly steps

1 and 2

Pre-Assembly Prep

Contents for Step 1

(24) 1/2” Alum. Nylock Nuts

(2) 1/2 x 4” ss Bolts.

(8) 1/2 x 3 1/2” ss Bolts

(6) 1/2 x 3” ss Bolts

(8) 1/2 x 1 3/4” ss Bolts

(48) 1/2” ID x 7/8” OD ss Washers

NOTE

(2) ½” Nylock Nuts

and (2) ½” Washers

are used in Step 6-D

to attach lifting

cables to (2) ½” x 4”

Bolts.

NOTE

ALL FASTENERS IN

STEP 1 ARE HAND-

TIGHTENED ONLY.

Assembly for Step 1

NOTE

(2) ½” Nylock

Nuts and (2) ½”

Washers ARE

NOT used for (2)

½” x 4” Bolts on

corners A and D

until Step 6-D.

IMPORTANT NOTE:

FRAME BEAMS MUST

BE IN THIS

ORIENTATION

BEFORE CONTINUING.

FRONT/REAR

Andere Handbücher für VSD 5000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Floe Hebesystem Handbücher

Floe

Floe PWC1300 Bedienungsanleitung

Floe

Floe 3800 Bedienungsanleitung

Floe

Floe V-3600 Bedienungsanleitung

Floe

Floe P1200 Bedienungsanleitung

Floe

Floe VSD 5000 Bedienungsanleitung

Floe

Floe VSD 6000 Bedienungsanleitung

Floe

Floe VSD7500 Bedienungsanleitung

Floe

Floe VSD 3800 Bedienungsanleitung

Floe

Floe V2600-VSD5000 Bedienungsanleitung

Floe

Floe VSD Bedienungsanleitung

Floe

Floe VSD6500 Betriebsanleitung

Floe

Floe V2602 LENGTH BUNKS Bedienungsanleitung

Floe

Floe V-2000 Bedienungsanleitung

Floe

Floe P-1600 Bedienungsanleitung

Floe

Floe PWC1300 Bedienerhandbuch

Beliebte Hebesystem Handbücher anderer Marken

morse

morse 82H-124 Bedienungsanleitung

Braun

Braun NL955 Series Bedienungsanleitung

haacon

haacon 1889.10 Bedienungsanleitung

Protekt

Protekt AT 252 Bedienungsanleitung

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Bedienungsanleitung

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Bedienungsanleitung

Genie

Genie Z-60/34 Bedienungsanleitung

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Bedienungsanleitung

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Bedienungsanleitung

Custom Equipment

Custom Equipment Hy-Brid 3 Series Programmierhandbuch

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Programmierhandbuch

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Programmierhandbuch

BERG

BERG BeNomic EasyLeaf Bedienungsanleitung

Powermate

Powermate LiftGate LG-3 Bedienungsanleitung

Snorkel

Snorkel TM12 Series Bedienungsanleitung

Terberg

Terberg OMNIDEKA Bedienungsanleitung

Harmar Mobility

Harmar Mobility AL625 Betriebsanleitung

Rotary

Rotary SPO16 Bedienungsanleitung