Floorwash F25 Gebrauchsanweisung

MANUAL OF USE AND MAINTENANCE

FLOOR SCRUBBER

Foreword 3

Manual content, use and maintenance 3

Storage of manual of use and maintenance 3

Machine delivery 3

F25 technical description 3

Serial number 3

General safety rules 3

Recommendations 4

Warnings 5

Technical data 6

Spare parts 7

Packaging specications and dimensions 8

Machine unpacking 8

Machine assembly 9

How to get started 10

ON/OFF 11

Functioning 12

Transport 14

After cleaning 14

Maintenance 16

Troubleshooting tips 17

FOREWORD

It is of outmost importance to keep the machine at its maximum eciency by carrying out the

maintenance described in this manual carefully. It is important to keep this instruction manual

in a safe place so that it can be referred to whenever necessary. For further requirements, please

contact our customer service centre or your nearest authorised dealer.

MANUAL CONTENT, USE AND MAINTENANCE

The following manual has been drawn up to provide customers with all necessary information in

order to use the machine as safely and smoothly as possible.

STORAGE OF MANUAL OF USE AND MAINTENANCE

The manual of use and maintenance should be kept in a safe and easy accessible place in the

immediate proximity to the machine. To avoid compromising its readability, keep this manual

away from sources of heat, liquids or detergents.

MACHINE DELIVERY

The F25 machine is delivered in a protective packaging. Ensure that the packaging is fully intact and

that there are no signs of tempering when the product is taken over. The customer should notify our

customer service immediately in case of damages.

F25 TECHNICAL DESCRIPTION

The F25 is a mechanical oor scrubber-dryer that ensures eective cleaning surfaces including

uneven supercies. The combined mechanical action of brush, water and centrifugal force will

guarantee the best results with minimum eort. It cleans, rubs and collects the lth and it is

perfect for constant and frequent use. This scrubber dryer is particularly suited for the treatment

and cleaning of oors made of terracotta, pottery, setts, clinker, rubber, resin, marble, linoleum,

raw concrete, agstone, serizzo granite, stone, carpets and rugs.

SERIAL NUMBER

The label with the serial number is located below the machine, in the underlying part of the

external left side. That number shall be always notied for technical assistance or request of

spare parts.

GENERAL SAFETY RULES

This oor scrubber-dryer is easy to use; anyway, it is necessary to read the following rules carefully

in order to avoid damages to both the operator and the machine.

Recommendations

• The machine is not intended to be used by persons (including children)

whose physical, sensory and mental capacities are impaired, or with lack

of the necessary experience and knowledge, unless they are supervised

or instructed in its use by persons responsible for their safety.

• Children shall be supervised to ensure that they do not play with the

machine.

• If the power supply is damaged, it shall be replaced by the manufacturer

or its authorised technical assistance.

• This machine is suitable for indoor use only.

• Do not use the machine on slopes.

• In case of emergency, remove the power cable from the outlet promptly.

• Unplug the power cable from the outlet before maintenance is

performed.

• Use only brushes provided with the machine or supplied by an

authorised dealer and/or reseller to avoid compromising safety and

warranty.

• The machine shall not be left unattended, but stored in a protected

area to prevent the machine from being moved accidentally.

Warnings

Always unplug the power cable from the outlet when not in use

or before adjustments and maintenance are performed.

Do not use or keep the machine outside in wet conditions, and

avoid direct exposure to rain.

Do not hold the plug or machine with wet hands.

The machine is suitable for use in dry conditions at a

temperature range of +5°C to +35°C (+41°F to +95°F).

The power outlet socket of the machine shall be connected to

an approved earth.

Do not insert objects through openings. Do not use when

openings are clogged.

Protect the machine from sunlight and UV radiation.

Do not suck gases, liquids or potentially explosive and

combustible dusts. These substances may corrode materials

used in the construction of the machine.

Follow the basic safety rules for use in hazardous areas, such as

service station or gas distributors.

Do not use the machine in potentially explosive atmospheres.

Do not place containers holding liquids on the machine.

Do not pull the power cable to carry the machine.

Keep the electrical cable away from sources of heat.

For use in work environments, do not hit shelves or scaoldings

where there is a risk of objects falling. The user shall be equipped

with adequate safety equipment (gloves, footwear, helmet,

goggles, etc.).

Request original spare parts only to dealers and/or authorised

resellers in case of parts replacement or maintenance.

Check the machine in an authorised service centre at least once

a year.

Organise the disposal of waste materials complying scrupulously

with current regulations.

TECHNICAL DATA

Machine height 140mm

Machine width 285mm

Machine length 330mm

Front brush Ø86 700 revolutions per minute

Rear brush Ø54 1145 revolutions per minute

Working width 250mm

Work capacity 200mq/h

Induction motor power 400W 2800 revolutions per minute

Total storage capacity 4l

Recovery tank capacity 1l

Total empty weight 10kg

38 51

18C 18D

VIT17 18A 18B

DAD2

37A

VIT19

DAD2 1A

VIT18

20A

20C

20D

20B 20

SPARE PARTS

1 COMPLETE NYLON EXTERNAL LEFT SIDE

1A NYLON EXTERNAL LEFT SIDE

DAD2 LOW SQUARE NUT 4MA

CAF25 MACHINE BODY F25

15 UNIVERSAL REAR BRUSH

16 UNIVERSAL FRONT BRUSH

18 COMPLETE HEXAGON SPRING PLUNGER CH10

18A HEXAGON PLUNGER INSERT BUTTON CH10

18B HEXAGON PLUNGER CH10

18C SPRING LATCH FOR HEXAGON PLUNGER CH10

18D HEXAGON PLUNGER EJECT BUTTON CH10

20 COMPLETE HEXAGON SPRING PLUNGER CH7

20A HEXAGON PLUNGER INSERT BUTTON CH7

20B HEXAGON PLUNGER CH7

20C SPRING LATCH FOR HEXAGON PLUNGER CH7

20D HEXAGON PLUNGER EJECT BUTTON CH7

37 COMPLETE NYLON EXTERNAL RIGHT SIDE

37A NYLON EXTERNAL RIGHT SIDE

38 COMPLETE COVER F25

41 COMPLETE HANDLE

50 COMPLETE TANK

51 WASTE WATER TANK

49 80

PACKAGING SPECIFICATIONS AND DIMENSIONS

The F25 machine is delivered in a protective packaging.

Ensure that the packaging is fully intact and that there are

no signs of tempering when the product is taken over. In

case of damage, the customer shall notify our customer

service immediately.

MACHINE UNPACKING

Follow the procedure below:

1 Place the packaging on the oor/work table softly by laying it down on the right part.

2 Open the external cardboard by using a pair of scissors, when necessary. (Do not use an utility

knife).

3 Remove the machine body, tank and extensible tube, and place them on the oor softly.

4 Keep the cardboard box and its components away from sources of heat, in a dry and easily

accessible place.

Do not break or throw the packaging and its components away so that it can be used

again for future transportation.

For your safety, wear protective gloves when carrying out these operations, in order to

avoid injuries in case of accidental contact with sharp edges of the cardboard box, direct

contact with detergent residues or metal edges.

CLA

CK!

CLACK!

MACHINE ASSEMBLY

Follow the procedure below:

The F25 machine has a fast assembly system since no tools are required.

Do not use any tool to avoid injuries or damage to the machine.

1Place the body of the machine on a stable surface

without slopes.

2Insert the handle in the axle of the machine body.

3Insert the tank in the handle at the

desired height (3 dierent heights).

4Insert the small transparent water tube in the relief

valve situated on the lower part of the tank.

5Hook the electrical cord into its appropriate

seat situated at the top end of the tank.

HOW TO GET STARTED

The F25 machine is a mechanical collection device that can achieve excellent results even

with the use of water without detergent.

An excellent result is achieved with the use of specic detergents.

The machine comes with universal brushes (gr 0.12). Anyway, it is possible to request

specic brushes to our customer service according to the type of surface to be treated.

Use foam-controlled detergents to avoid excessive foaming. Do not use pure acids.

Wear protective gloves before handling detergents, alkaline or acid solutions to avoid

hand injuries.

1Remove the tank cap.

2Pour the liquid, clean water and/or detergent in

the concentration specied on the label.

3Replace the tank cap.

Fill the tank with clean water and/or detergent for a maximum of 2lt.

Use water at a temperature not exceeding 40°C or below 10°C.(104°F – 50°F).

Inhaltsverzeichnis

Andere Floorwash Schrubber Handbücher

Floorwash

Floorwash FB35 Gebrauchsanweisung

Floorwash

Floorwash 1400 Gebrauchsanweisung

Beliebte Schrubber Handbücher anderer Marken

Olympus

Olympus M200H Bedienungsanleitung

Clarke

Clarke BEXT 100H Installations- und Betriebsanleitung

JOHNY VAC

JOHNY VAC JVC70BCT Bedienungsanleitung

RCm

RCm Elan Series Handbuch

Kärcher

Kärcher B 120 W Bedienungsanleitung

Truvox

Truvox Orbis MotorScrubber 20 Bedienungsanleitung

Numatic

Numatic TTB 4045/100 Bedienungsanleitung

U.S. Products

U.S. Products PEX 500-C-TICK Betriebsanleitung

Mclennan

Mclennan C510 Bedienungsanleitung

Tennant

Tennant T20 LPG Bedienungsanleitung

Columbus

Columbus ARA 66 BM 100 Bedienungsanleitung

Numatic

Numatic TTV 678G / 300T Bedienungsanleitung

American-Lincoln

American-Lincoln 505-945 Bedienungsanleitung

FIORENTINI

FIORENTINI ET 65-75 Bedienungsanleitung

Floorpul

Floorpul ruby 48 blt Benutzerhandbuch

Onyx

Onyx RX-34 Bedienungsanleitung

Dustbane

Dustbane Hurricane 400 Bedienungsanleitung

Sana

Sana EUJ-702 Bedienungsanleitung