Fluke Calibration 7526A Bedienungsanleitung

PN 4218030

July 2012

All product names are trademarks of their respective companies.

7526A

Precision Process Calibrator

Getting Started

LIMITED WARRANTY AND LIMITATION OF LIABILITY

Each Fluke product is warranted to be free from defects in material and workmanship under

normal use and service. The warranty period is one year and begins on the date of shipment.

Parts, product repairs, and services are warranted for 90 days. This warranty extends only to the

original buyer or end-user customer of a Fluke authorized reseller, and does not apply to fuses,

disposable batteries, or to any product which, in Fluke's opinion, has been misused, altered,

neglected, contaminated, or damaged by accident or abnormal conditions of operation or

handling. Fluke warrants that software will operate substantially in accordance with its functional

specifications for 90 days and that it has been properly recorded on non-defective media. Fluke

does not warrant that software will be error free or operate without interruption.

Fluke authorized resellers shall extend this warranty on new and unused products to end-user

customers only but have no authority to extend a greater or different warranty on behalf of Fluke.

Warranty support is available only if product is purchased through a Fluke authorized sales outlet

or Buyer has paid the applicable international price. Fluke reserves the right to invoice Buyer for

importation costs of repair/replacement parts when product purchased in one country is submitted

for repair in another country.

Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase price, free of

charge repair, or replacement of a defective product which is returned to a Fluke authorized

service center within the warranty period.

To obtain warranty service, contact your nearest Fluke authorized service center to obtain return

authorization information, then send the product to that service center, with a description of the

difficulty, postage and insurance prepaid (FOB Destination). Fluke assumes no risk for damage in

transit. Following warranty repair, the product will be returned to Buyer, transportation prepaid

(FOB Destination). If Fluke determines that failure was caused by neglect, misuse, contamination,

alteration, accident, or abnormal condition of operation or handling, including overvoltage failures

caused by use outside the product’s specified rating, or normal wear and tear of mechanical

components, Fluke will provide an estimate of repair costs and obtain authorization before

commencing the work. Following repair, the product will be returned to the Buyer transportation

prepaid and the Buyer will be billed for the repair and return transportation charges (FOB

Shipping Point).

THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY

IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, ARISING FROM

ANY CAUSE OR THEORY.

Since some countries or states do not allow limitation of the term of an implied warranty, or

exclusion or limitation of incidental or consequential damages, the limitations and exclusions of

this warranty may not apply to every buyer. If any provision of this Warranty is held invalid or

unenforceable by a court or other decision-maker of competent jurisdiction, such holding will not

affect the validity or enforceability of any other provision.

Fluke Corporation

P.O. Box 9090

Everett, WA 98206-9090

U.S.A.

Fluke Europe B.V.

P.O. Box 1186

5602 BD Eindhoven

The Netherlands

11/99

Table of Contents

Title Page

Introduction........................................................................................................ 1

Contact Fluke Calibration.................................................................................. 1

Safety Information............................................................................................. 2

Unpack the Product............................................................................................ 3

Standard Equipment........................................................................................... 4

Options and Accessories.................................................................................... 4

Product Description ........................................................................................... 5

Front Panel Overview.................................................................................... 5

Primary Input/Output Terminals ................................................................... 6

Primary Input/Output Display and Controls.................................................. 7

Isolated Input Display, Controls, and Terminals........................................... 10

Rear Panel...................................................................................................... 11

Display Layouts............................................................................................. 12

Error Messages.............................................................................................. 15

Getting Started................................................................................................... 15

Specifications..................................................................................................... 16

General Specifications................................................................................... 16

DC Voltage Specifications, Output............................................................... 17

DC Voltage Specifications, Isolated Input .................................................... 17

DC Current Specifications, Output................................................................ 17

DC Current Specifications, Isolated Input..................................................... 17

Resistance Specifications, Output ................................................................. 18

Resistance Specifications, Input.................................................................... 18

Thermocouple Specification, Output and Input ............................................ 19

RTD and Thermistor Specification, Output .................................................. 20

RTD and Thermistor Specification, Input..................................................... 21

Pressure Measurement Specifications........................................................... 22

Switch Test Specifications, Isolated Input .................................................... 22

7526A

Getting Started

iii

List of Tables

Table Title Page

1. Symbols.................................................................................................................. 3

2. Error Messages....................................................................................................... 15

3. Line Voltage Settings............................................................................................. 15

7526A

Getting Started

List of Figures

Figure Title Page

1. Front Panel............................................................................................................. 5

2. Primary Input/Output Terminals............................................................................ 6

3. Primary Input/Output Display and Controls .......................................................... 7

4. Isolated Input Display, Controls, and Terminals.................................................... 10

5. Rear Panel .............................................................................................................. 11

6. Primary Voltage and Current Display.................................................................... 12

7. Primary Thermocouple and RTD Display ............................................................. 13

8. Primary and Isolated Pressure Display................................................................... 14

9. Isolated Voltage and Current Display.................................................................... 14

7526A

Getting Started

Introduction

The Fluke 7526A Precision Process Calibrator (the “Product” or “Calibrator”) is an

accurate, full-featured temperature, pressure, and DC calibrator. The Calibrator is meant

for research and development, manufacturing, and calibration lab procedures. The

Product operation is easy and you will quickly understand its operations and features.

Some time-saving features let you:

•Save, recall, and automatically move through setpoints for each output range

•Record user-defined RTD curves

•Remotely interface with the Product

For complete use instructions, see the Users Manual found on the product CD-ROM.

Contact Fluke Calibration

To contact Fluke Calibration, call one of the subsequent telephone numbers:

•Technical Support USA: 1-877-355-3225

•Calibration/Repair USA: 1-877-355-3225

•Canada: 1-800-36-FLUKE (1-800-363-5853)

•Europe: +31-40-2675-200

•Japan: +81-3-6714-3114

•Singapore: +65-6799-5566

•China: +86-400-810-3435

•Brazil: +55-11-3759-7600

•Anywhere in the world: +1-425-446-6110

To see product information and download the latest manual supplements, visit Fluke

Calibration’s website at www.flukecal.com.

To register your product, visit http://flukecal.com/register-product.

7526A

Getting Started

Safety Information

A Warning identifies conditions and procedures that are dangerous to the user; A

Caution identifies conditions and procedures that could cause Product damage,

equipment under test damage, or permanent loss of data.

Warnings

To prevent possible electrical shock, fire, or personal injury:

•Read all safety Information before you use the Product.

•Carefully read all instructions.

•Use the Product only as specified, or the protection

supplied by the Product can be compromised.

•Use this Product indoors only.

•Examine the case before you use the Product. Look for

cracks or missing plastic. Carefully look at the insulation

around the terminals.

•Use only the mains power cord and connector approved for

the voltage and plug configuration in your country and rated

for the Product.

•Replace the mains power cord if the insulation is damaged

or if the insulation shows signs of wear.

•Make sure the ground conductor in the mains power cord is

connected to a protective earth ground. Disruption of the

protective earth could put voltage on the chassis that could

cause death.

•Do not put the Product where access to the mains power

cord is blocked.

•Do not touch voltages > 30 V ac rms, 42 V ac peak, or 60 V

dc.

•Use only cables with correct voltage ratings.

•Do not apply more than the rated voltage, between the

terminals or between each terminal and earth ground.

•Do not use the Product around explosive gas, vapor, or in

damp or wet environments.

•Remove all probes, test leads, and accessories that are not

necessary for the measurement.

•Do not use the Product if it operates incorrectly.

•Do not use and disable the Product if it is damaged.

Inhaltsverzeichnis

Andere Fluke Calibration Prüfgeräte Handbücher

Fluke Calibration

Fluke Calibration 5080A Gebrauchs- und Pflegehandbuch

Fluke Calibration

Fluke Calibration 5522A Bedienungsanleitung

Fluke Calibration

Fluke Calibration P3000 Series Bedienungsanleitung

Fluke Calibration

Fluke Calibration P3031 Bedienungsanleitung

Fluke Calibration

Fluke Calibration 5322A Bedienungsanleitung

Fluke Calibration

Fluke Calibration 5322A Gebrauchs- und Pflegehandbuch

Fluke Calibration

Fluke Calibration 4322-SYS-NAVAIR Bedienungsanleitung

Fluke Calibration

Fluke Calibration 55 Series Bedienungsanleitung

Fluke Calibration

Fluke Calibration 9500B Gebrauchs- und Pflegehandbuch

Fluke Calibration

Fluke Calibration TST-40M-HC40 Bedienungsanleitung

Fluke Calibration

Fluke Calibration CalPower 6331 Bedienungsanleitung

Fluke Calibration

Fluke Calibration 6020 Series Bedienungsanleitung

Fluke Calibration

Fluke Calibration 5560A Bedienungs- und Wartungshandbuch

Fluke Calibration

Fluke Calibration P3800 Series Bedienungsanleitung

Fluke Calibration

Fluke Calibration 5730A Bedienungsanleitung

Fluke Calibration

Fluke Calibration 5730A Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung