Fluke 05-443 Bedienungsanleitung
PN 4484924
Rev.1 April 2014
© 2014 Fluke Corporation. All rights reserved. Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
05-443/05-444
Digital Wall Mount-Area Monitor
Users Manual
Warranty and Product Support
Fluke Biomedical warrants this instrument against defects in materials and workmanship for one year from
the date of original purchase OR two years if at the end of your first year you send the instrument to a Fluke
Biomedical service center for calibration. You will be charged our customary fee for such calibration. During
the warranty period, we will repair or at our option replace, at no charge, a product that proves to be
defective, provided you return the product, shipping prepaid, to Fluke Biomedical. This warranty covers the
original purchaser only and is not transferable. The warranty does not apply if the product has been
damaged by accident or misuse or has been serviced or modified by anyone other than an authorized Fluke
Biomedical service facility. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA,
ARISING FROM ANY CAUSE OR THEORY.
This warranty covers only serialized products and their accessory items that bear a distinct serial number
tag. Recalibration of instruments is not covered under the warranty.
This warranty gives you specific legal rights and you may also have other rights that vary in different
jurisdictions. Since some jurisdictions do not allow the exclusion or limitation of an implied warranty or of
incidental or consequential damages, this limitation of liability may not apply to you. If any provision of this
warranty is held invalid or unenforceable by a court or other decision-maker of competent jurisdiction, such
holding will not affect the validity or enforceability of any other provision.
7/07
Notices
All Rights Reserved
Copyright 2014, Fluke Biomedical. No part of this publication may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language without the written permission of Fluke Biomedical.
Copyright Release
Fluke Biomedical agrees to a limited copyright release that allows you to reproduce manuals and other printed materials
for use in service training programs and other technical publications. If you would like other reproductions or distributions,
submit a written request to Fluke Biomedical.
Unpacking and Inspection
Follow standard receiving practices upon receipt of the instrument. Check the shipping carton for damage. If damage is
found, stop unpacking the instrument. Notify the carrier and ask for an agent to be present while the instrument is
unpacked. There are no special unpacking instructions, but be careful not to damage the instrument when unpacking it.
Inspect the instrument for physical damage such as bent or broken parts, dents, or scratches.
Technical Support
For application support or answers to technical questions, either email techservices@flukebiomedical.com or call 1-800-
850-4608 or 1-440-248-9300. In Europe, email techsupport.emea@flukebiomedical.com or call +31-40-2675314.
Claims
Our routine method of shipment is via common carrier, FOB origin. Upon delivery, if physical damage is found, retain all
packing materials in their original condition and contact the carrier immediately to file a claim. If the instrument is delivered
in good physical condition but does not operate within specifications, or if there are any other problems not caused by
shipping damage, please contact Fluke Biomedical or your local sales representative.
Returns and Repairs
Return Procedure
All items being returned (including all warranty-claim shipments) must be sent freight-prepaid to our factory location. When
you return an instrument to Fluke Biomedical, we recommend using United Parcel Service, Federal Express, or Air Parcel
Post. We also recommend that you insure your shipment for its actual replacement cost. Fluke Biomedical will not be
responsible for lost shipments or instruments that are received in damaged condition due to improper packaging or
handling.
Use the original carton and packaging material for shipment. If they are not available, we recommend the following guide
for repackaging:
Use a double–walled carton of sufficient strength for the weight being shipped.
Use heavy paper or cardboard to protect all instrument surfaces. Use nonabrasive material around all
projecting parts.
Use at least four inches of tightly packed, industry-approved, shock-absorbent material around the
instrument.
Returns for partial refund/credit:
Every product returned for refund/credit must be accompanied by a Return Material Authorization (RMA) number,
obtained from our Order Entry Group at 1-440-498-2560.
Repair and calibration:
To find the nearest service center, go to www.flukebiomedical.com/service or
In the U.S.A.:
Cleveland Calibration Lab
Tel: 1-800-850-4608 x2564
Everett Calibration Lab
Tel: 1-888-99 FLUKE (1-888-993-5853)
In Europe, Middle East, and Africa:
Eindhoven Calibration Lab
Tel: +31-40-2675300
In Asia:
Everett Calibration Lab
Tel: +425-446-6945
To ensure the accuracy of the Product is maintained at a high level, Fluke Biomedical recommends the product
be calibrated at least once every 12 months. Calibration must be done by qualified personnel. Contact your local
Fluke Biomedical representative for calibration.
Certification
This instrument was thoroughly tested and inspected. It was found to meet Fluke Biomedical’s manufacturing
specifications when it was shipped from the factory. Calibration measurements are traceable to the National Institute of
Standards and Technology (NIST). Devices for which there are no NIST calibration standards are measured against in-
house performance standards using accepted test procedures.
WARNING
Unauthorized user modifications or application beyond the published specifications may result in electrical shock hazards
or improper operation. Fluke Biomedical will not be responsible for any injuries sustained due to unauthorized equipment
modifications.
Restrictions and Liabilities
Information in this document is subject to change and does not represent a commitment by Fluke Biomedical.
Changes made to the information in this document will be incorporated in new editions of the publication. No
responsibility is assumed by Fluke Biomedical for the use or reliability of software or equipment that is not
supplied by Fluke Biomedical, or by its affiliated dealers.
Manufacturing Location
The 05-443/05-444 is manufactured for Fluke Biomedical, 6920 Seaway Blvd., Everett, WA, U.S.A.
i
Table of Contents
Title Page
Introduction............................................................................................ 1
Safety Information ................................................................................. 2
Symbols................................................................................................. 4
General Specifications .......................................................................... 4
Driver Option Specification.................................................................... 6
Getting Started ...................................................................................... 6
Power Up........................................................................................... 6
Radiation Units .................................................................................. 7
Checking Parameters ........................................................................ 8
Setting Alarm-Points.......................................................................... 8
Operational Check (Optional) ............................................................ 9
Operator Controls and Setup ................................................................ 10
Calibration Controls ........................................................................... 10
Dipswitch (under calibration cover) ................................................... 11
RS-232 Output................................................................................... 12
9-Pin Data Connector (Female Sockets)........................................... 13
Internal Detector Setups.................................................................... 13
Model 05-443 and Model 05-443-2200 ......................................... 13
Model 05-444................................................................................. 14
Common Options and Modifications...................................................... 15
Time and Date Stamp Option ............................................................ 15
Description..................................................................................... 15
Setup ............................................................................................. 15
Date and Time ............................................................................... 15
RS232 Data Format....................................................................... 15
Modifications to the Product for Optimum Performance.................... 15
Calibration ............................................................................................. 16
High Voltage ...................................................................................... 16
Calibration Parameters...................................................................... 16
Analog Output.................................................................................... 16
Discriminator...................................................................................... 17
Battery Charge .................................................................................. 17
Maintenance.......................................................................................... 17
Cleaning Instructions and Precautions .............................................. 17
Replacement of Mains Fuse.............................................................. 17
Recycling ........................................................................................... 18
Installation Template ......................................................................... 18
05-443/05-444
Users Manual
ii
iii
List of Figures
Figure Title Page
1. Front Panel................................................................................................ 2
2. Left Side-Panel.......................................................................................... 6
3. Alarm Point Notice..................................................................................... 7
05-443/05-444
Users Manual
iv
1
Introduction
Models 05-443 or 05-443-2200 and 05-444 Primalert®Digital Wall-Mount Area
Monitors (the Product) are designed for visibility and ease of use. Featuring a
wall-mount chassis, the Product utilizes a four-digit LED display that is readable
from 9.1 m (30 feet) away. Backlit indicators warn of low-radiation alarm (yellow),
high-radiation alarm (red), instrument failure (red), and low battery (yellow). A
green status light is a positive indication of instrument operation.
Parameters are protected under a calibration cover. Calibration is easily
accomplished by moving the CAL dipswitch to the right, and using the
pushbuttons to increment or decrement the calibration constant, dead time
correction, and alarm point parameters. Parameters are stored in non-volatile
memory (retained even with power disconnected).
A five-decade logarithmic analog output is provided. A battery backup provides
48 hours of additional use after the primary power is removed.
Systems included in this manual are:
•Model 05-443 and 05-443-2200 with an internal LND 71210 detector
•Model 05-444 with an internal LND 71412 detector
Figure shows the Product.
05-443/05-444
Users Manual
2
huk01.eps
Figure 1. Front Panel
Safety Information
A Warning identifies conditions and procedures that are dangerous to the user.
A Caution identifies conditions and procedures that can cause damage to the
Product or the equipment under test.
Warning
To prevent possible electrical shock, fire, or personal injury:
•Read all safety information before you use the Product.
•Carefully read all instructions.
•Do not use the Product around explosive gas, vapor, or in
damp or wet environments.
•Use the Product only as specified, or the protection
supplied by the Product can be compromised.
•Use this Product indoors only.
•Use only the mains power cord and connector approved for
the voltage and plug configuration in your country and
rated for the Product.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Fluke Monitor Handbücher
