Fluke 9132A Bedienungsanleitung

9132A

Service Manual

PIN 752857

November 1989 =Lu) Kf=

WARRANTY

COVERAGE

Fluke warrants the 9132A Memory Interface Pod to be free from defects in material and workmanship

under normal use and service for a period of ona (1) year from the date of shipment. The warranty does

not cover parts that connect directly to the Unit Under Test (flying lead sets, microprocessor sockets,

clips, headers, and Sync Adapter assemblies). This warranty extends only to the original purchaser and

does not apply to any product that has been misused, altered, or has been subjected to abnormal

conditions of operation.

Fluke's obligations under this warranty is limited to repair or replacement of aproduct that is returned to

an authorized Service Center within the warranty period, provided that we determine that the product is

defective. ¥we determine that the failure has been caused by misuse, alteration, or abnormal conditions

of operation, or if the warranty period has expired, we will repair the Pod and bill you for the reasonable

repair cost.

SERVICE

iafailure occurs, send the product, postage prepaid, to the closest Service Center with adescription of

the difficulty. Repairs will be made or the product replaced, and it will be returned, transportation prepaid.

Fluke assumes NO risk for damage in transit.

DISCLAIMER

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF

MERCHANTABILITY, FITNESS, OR ADEQUACY FOR ANY PARTICULAR PURPOSE OR USE.

FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES, WHETHER IN CONTRACT, TORT, OR OTHERWISE.

’

GETTING ANSWERS AND ADVICE

To enhance your use of this Pod, Fluke will be happy to answer you questions about applications and use.

Address all correspondence to: JOHN FLUKE MFG. CO. INC, P.O. BOX 8080, EVERETT,

WASHINGTON 98206-9090, ATTN: Sales Department,

JOHN FLUKE MFG. CO., P.O. BOX 9090, EVERETT, WASHINGTON 88206-9090

CHANGE/ERRATA INFORMATION

ISSUE NO: 13/92

This change/errata contains information necessary to ensure the accuracy of

the following manual. Enter the corrections in the manual if either one of

the following conditions exist:

1. The revision letter stamped on the indicated PCB is equal to or

higher than that given with each change.

2. No revision letter is indicated at the beginning of the

change/exrata.

MANUAL

Title: 9132A service

Print Date: November 1989

Rev.- Date: m=

C/E PAGE EFFECTIVITY

Page No. Print Date

3/92

9132a

CHANGE #1 ~39582

Rev. -E, A3 Sync Module PCA (9132A-4002A)

On page 4-14, Table 4-4, make the following changes:

DELETE: J2|HEADER,Z ROW, .100CTR,RT ANG,20 PIN|500447/00779{1~87230-0}1}1

CHANGE: J2|[HEADER,2 ROW, .100CTR,RT ANG,14 PIN|757443100779187230~-7 {141

TO:. .J2|HEADER,2 ROW, .100CTR,RT ANG, 34 PIN|876214100779{1~87230-7{1

DELETE: NOTE 1 = P/N’s 500447 and 757443 are mounted next to each other

to form one .34-pin connector (J2).

©©ds

CHANGE #2 r,:39648

On page 4-5, Table 4-1,

CHANGE: MP5{TOP COVER ASSY/SELFTEST DOOR,PAINTED{792846189536]792846(1

TO: -MPS|TOP COVER ASSY/SELFTEST DOOR, PAINTED |886049{89536(886049(1

CHANGE #3 ~40220,41073

Ver. 2.0

On page 4-10, Table 4-2, make the following changes:

FROM: U32 |*PROGRAMMED PAL 1857495189536185749511

TO: U32 |*PROGRAMMED PAL, V2.0 1879916189536187991611 _—

FROM: U89 |*PROGRAMMED PROM, LO BYTE 1857487189536(85748711

TO: UB9, 90 |*PROGRAMMED PROM SET, V2.01889779189536188977911

DELETE: US0{*PROGRAMMED PROM,HI BYTE 1857482(895361857482{1

CHANGE #4 ~42111

On page 4-5, Table 4-1,

CHANGE: MP12|LABEL, VINYL, .3,1.5,BAR CODE|844712/89536184471211

TO: MP12 NAMEPLATE, SERIAL REAR PANEL|472795185480(472795]1

CHANGE #5 ~448795

The 9132FT-4002 A3 Sync Module is replacing the 9%132A-4002,

On page 4-5, Table 4-1, make the following changes:

FROM: MP14|CASE TOP, SYNC MODULE,PAD TRANSFER{8553791{895361855379{1

TO: MP14|CASE TOP, SYNC MODULE, PAD TRANSFER|894642{89536)89464211

FROM: MP16|DECAL, SYNC MODULE {844139189536184413911

TO: MP16{DECAL, SYNC MODULE|881424189536{891424|1

FROM: W4|SYNC MODULE CABLE ASSY{785584(89536{785584]1

TO: W4 |SYNC MODULE CABLE ASSY(|891429189536189142941

3/92 -1-

On page 4-14,

Table 4-4. Al Sync Module

(Sas Flgure 4-4)

FLUKE

STOCK

weRQum

847293

747287

147287

867572

747352

782573

782873

782573

742320

742544

42548

847012

838565

876214

742031

742023

853783

838045

201423

746453

740522

746529

#67109

746610

745610

746461

$11455

746248

740548

746560

745984

838102

181237

833391

853676

876813

T4156

£91429

761684

ss7088

MFRS

seLy

“CODE

89536

04222

$6289

04222

53993

A233

8A233

89536

00779

A233

T3445

56637

3vezs

91637

1637

91637

91627

91637

91632

91637

REFERENCE

DESIGHATOR

UM 127"

A1HYBRID ASSY, TESTED

<1-6, '14= CAP, CER, 0.1UF, +~108,25V,X7R, 1206

<17, 22-36 *

Cc 7-13, 37- CAP, TA, 10UF, +~20%, 16V, 6032

< 40

C41-45 CAP, CER, 47BF, +=10%, 50V, C0G, 1206

CRY, 4, 7, DIODE, S$I,30 £1IV,1.1 AMP, SCHOTTKY

CR 10, 13- 16, :

CR 20, 21

CR 2, 58, *DIODE, $I, BV=70.0V, 10=50MA, DUAL, $0723

CR 11, 17- 13, *

CR 23 =

CR 3, 69, *DICQDE, $I, BV=~70.0V, IO=$0MA, DUAL, §0T23

CR 12 *

t2, 3QVERDRIVE CABLE ASSY

J1HEADER, 2ROW, ,050CTR, 50 PIN

J2HEADER, 2ROW, .100CTR, RT ANG, 34 PIN

Qe i, 3, 6, *TRANSISTOR, SI, NPN, SMALL SIGNAL, S0T~23

Q7*

Q2, 45*TRANSISTOR, ST, PNP, SMALL SIGNAL, $OT-23

R1*RES, CERM, 18, +-5%, IW, 200PPH, 2512

R2*RES,CERM, 31, +~5%, IW, 200PPN, 2512

R3, 8©RES, CERM, 133K, +-1%, .125W, 1002PN, 1206

R4*RES, CERM, 1.8K, +~5%, (125W, 2000PH, 1206

Ré«RES,CERM, 4, 7K, +~5%, .125W, 200PPN, 1206

R7, *RES,CERM, 3.3K, +~5%, (125W, 200PPM, 1206

R9*RES, CERM, 1,21K, +-1%,.125W,100PPN, 1206

R16, 16, 18- * RES,CERM, 10X, +-5¢, 125W, 200PPN, 1206

R20, 23- 26 *

R11-13 *RES, CERM, 2K, 4-54, ,125W, 200PPN, 1206

R24 .*RES,CERM, 825, +-1%, .125W, 100PPH, 1206

R17 *RES, CERM, 33, +~5%, ,125W, 200PPM, 1206

R21 *RES, CERM, 100K, +~5%, ,125, 2008PM, 1206

R22 *RES, CERM, 5.1K, +-54, .125W, 200PPN, 1206

R27 *RES,CERM, 620, +~5%, .125W, 200PPM, 1206

RT i, 2THERMISTOR, DISC, 4.98, 25¢C

T® i, 2TERM, UNINSUL, WIRE FORM, TEST POINT

u1*1C,CMOS,QUAD 2INPUT XOR GATE, SOIC

u2, 3€+1C, CMOS, 0CTAL BUFFER/LINE DRVR, SOIC

u4*IC, CMOS, HEX INVERTER W/SCHT TRIG, SOIC

u5¢IC, COMPARATOR, QUAD, 14 PIN,S0IC

Ww 4SYNC MODULE CABLE ASSY

»6SYNC ADAPTER CABLE ASSY

z1, 2RES, CERM, SOIC,16 PIN, 8RRS, 36, 42%

An *in ‘S* column indicates astatic-sensitive part.

3/92 ww

replace Table 4-4 with the following:

9132A

MANUFACTURERS 0

PART NUMBER :TOT T

-OR GENERIC TYPEw-wen QTY~ ~E-

947293 1

12065C104RATMA a5

293D106X0016C2T OR W9

17065A070KATOSOD SF Fags

100030 TARE

Jeb

BAVSS

BAWSS

847012

104068-3

1-87230-7

BCXISTRL

BCX1TTRL

MC2512-180HM-SAT

MC2512-330KM-54T

CRON1206~1331F8

CRCW1206+180108

CRCW1206~4701J8

CRCWL206-330108

CRCW1206-1211FD

CRECW1206-100209

CRCW1206~200178

CRCW1206-8250FB

CRCWY206-33R058

CRCW1206+-100308

CRCW1206~510108

CRCW1206-$20008

CDTAACT240M9€

761684

S0MC~1603~560G

91i32a

On pages 4-15 and 5-21/5-22, Figure 4-4 and Figure 5-3, replace the

schematic and reference designator drawings with the following:

RE cm i

eeancUke

9132FT-1602

~3-

9132a

kan

80AR0

mun

HHT

.P—

SHIELD

TOWECTION

SHOW

TEST

POINTE

}

ail

28258 201 rr

alfa

E52

aetrts

[een

ow aPe

EY oh

wom

on fr]

wceeolis

__€8

|sPM

[ns

vw om

pava3

wre “® om oa aaoe on

acess

Agser

5.8

av Yec

o- et eon ovespazve

3/92 -4- 8132FT-1002

IMPORTANT NOTE

Use of the 9132A Interface Pod requires that the 9100-Series

Mainframe have software installed that is version 4.0 or later.

9132A Service

Table of Contents

SECTION TITLE PAGE

1INTRODUCTION AND SPECIFICATIONS ..covuecemeeecrneemrorenssnsmenens 1-1

1-1. INTRODUCTION 1-1

1-2. SPECIFICATIONS 1-1

2THEORY OF OPERATION 2-1

2-1. GENERAL THEORY OF OPERATION.

2-2. THEORY OF OPERATION.......c..ccoevrmemenn.

2-3. Main Board Kernel

2-4. Main Board Sync Generation Timing.....c...ceeovrvererenresniennnn.

2-5. Main Board Emulation RAM Connectors and Self Test.

2-6. Main Board Emulation RAM Control ...

2-7. Main Board Input/Output Devices.........

2-8. Main Board Address RAM and Sync Module Interface.

2-9. Main Board ROM Module COnnections........c.emmseemsessssresrsnsens 212

2-10. Sync Module 2-12

2-11. ROM Modules (24-, 28-, and 32-Pin Assemblies) .....c.ooeureirennes 2-13

2-12. ROM Plug Adapters 2-14

2-13. Self Test Assembly 2-15

2-14. RAM Module or Emulation RAM..... vase 2-15

2-15. Personality Module 2-15

2-16. Sync Adapters 2-16

3 MAINTENANCE 3-1

3-1. INTRODUCTION 3-1

3-2. WARRANTY AND FACTORY SERVICE... 32

3-3. INSPECTING ASHIPMENT .......ccccrumirvinnnne ee 3-2

3-4. SHIPPING THE POD TO FLUKE

FOR REPAIR OR ADJUSTMENT... 3-2

3-5. MAINTENANCE PROCEDURES. ...... wis 3-2

3-6. Cleaning 3-2

3-7. Changing the Fuses on the Sync Module...... 3-3

3-8. Changing the Fuse on the ROM Module .3-3

3-9. INSTALLING THE PLUG-IN MODULES .3-3

3-10. Installing the Personality Module ...... .3-4

3-11. Installing the Sync Module ........ 3-5

3-12. Installing the ROM Module(s) .3-5

3-13. Installing the RAM Module(s)........... ee 3-6

3-14. Closing the Pod Case 3-7

3-15. CONNECTING THE POD TO THE MAINFRAME 3-7

3-16. USING THE POD SELF TEST............ 3-7

9132A Service

TABLE OF CONTENTS, continued

SECTION TITLE PAGE

7. TROUBLESHOOTING PROCEDURES.......

8. Preparation for Troubleshooting the Pod.

9. Running the 9132A Service Test .....cvuvweeen.

-20. DISASSEMBLY

1. Removing the Main PCA..........

2. Removing the Self Test PCA...

3-23. Removing the ROM Module PCA.

3-24. Removing the Sync Module PCA............

4LIST OF REPLACEABLE PARTS ..ccovvvevernmssmrarasmcnssenssnncsnnmnssosasase 4-1

4-1. INTRODUCTION

4-2. HOW TO OBTAIN PARTS......ccoeorvnrrnnee

4-3. MANUAL STATUS INFORMATION

4-4. ADDITIONAL INFORMATION

4-5. NEWER INSTRUMENTS ......

5 SCHEMATIC DIAGRAMS 5-1

Inhaltsverzeichnis

Andere Fluke Prüfgeräte Handbücher

Fluke

Fluke 525A Bedienungsanleitung

Fluke

Fluke 753 Bedienungsanleitung

Fluke

Fluke 717-1000G Gebrauchsanweisung

Fluke

Fluke Versiv Series Bedienungsanleitung

Fluke

Fluke CombiScope PM3370B Bedienungsanleitung

Fluke

Fluke 718Ex 300G Bedienungsanleitung

Fluke

Fluke 742A-10k Bedienungsanleitung

Fluke

Fluke DTX Series Bedienungsanleitung

Fluke

Fluke 4180ETRS Bedienungsanleitung

Fluke

Fluke 709 Gebrauchs- und Pflegehandbuch

Fluke

Fluke 80PK-27 Bedienungsanleitung

Fluke

Fluke MicroScanner MS-POE Bedienungsanleitung

Fluke

Fluke Hart Scientific 9101 Bedienungsanleitung

Fluke

Fluke 6109A Bedienungsanleitung

Fluke

Fluke 7526A-156 Gebrauchs- und Pflegehandbuch

Fluke

Fluke 1507 Bedienungsanleitung

Fluke

Fluke PRV240FS Bedienungsanleitung

Fluke

Fluke PM3082 Bedienungsanleitung

Fluke

Fluke BT5300 Series Bedienungsanleitung

Fluke

Fluke P3800C Bedienungsanleitung

Fluke

Fluke 154 Bedienungsanleitung

Fluke

Fluke 5730A Stücklistenhandbuch

Fluke

Fluke 7080 Bedienungsanleitung

Fluke

Fluke TS 42DLX Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung