Fluke 62 MAX Bedienungsanleitung
PN 4060712
April 2012 Rev. 1, 11/12
© 2012 Fluke Corporation. All rights reserved. Printed in China.
Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
62 MAX/62 MAX +
Infrared Thermometer
Users Manual
1.888.610.7664info@Fluke-Direct.com Fluke-Direct.com
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and workmanship for three
years from the date of purchase. This warranty does not cover fuses, disposable
batteries, or damage from accident, neglect, misuse, alteration, contamination, or
abnormal conditions of operation or handling. Resellers are not authorized to
extend any other warranty on Fluke’s behalf. To obtain service during the warranty
period, contact your nearest Fluke authorized service center to obtain return
authorization information, then send the product to that Service Center with a
description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH
AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED.
FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR
THEORY. Since some states or countries do not allow the exclusion or limitation of
an implied warranty or of incidental or consequential damages, this limitation of
liability may not apply to you.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
11/99
1.888.610.7664info@Fluke-Direct.com Fluke-Direct.com
i
Table of Contents
Title Page
Introduction.................................................................................................................1
How to Contact Fluke .................................................................................................1
Safety Information ......................................................................................................2
Maintenance...............................................................................................................6
How to Change the Battery ....................................................................................6
How to Clean the Product ......................................................................................6
Specifications .............................................................................................................7
Standards and Agency Approval................................................................................9
The Product ................................................................................................................10
1.888.610.7664info@Fluke-Direct.com Fluke-Direct.com
1
Introduction
The Fluke 62 MAX and 62 MAX + Infrared Thermometers (the Product) can determine the
surface temperature by measuring the amount of infrared energy radiated by the target’s
surface. Note that the Japanese models indicate Celsius only.
Warning
Read all safety information before you use the Product.
1.888.610.7664info@Fluke-Direct.com Fluke-Direct.com
62 MAX/62 MAX +
Users Manual
2
Safety Information
A Warning identifies conditions and procedures that are dangerous to the user. A Caution
identifies conditions and procedures that can cause damage to the Product or the equipment
under test.
Table 1 tells you about symbols used on the Product and in this manual.
Warning
To prevent eye damage and personal injury:
•Read all safety Information before you use the Product.
•Do not use the Product if it operates incorrectly.
•Use the Product only as specified, or the protection supplied by the
Product can be compromised.
•Before you use the Product, inspect the case. Do not use the Product if it
appears damaged. Look for cracks or missing plastic.
1.888.610.7664info@Fluke-Direct.com Fluke-Direct.com
Infrared Thermometer
Safety Information
3
•See emissivity information for actual temperatures. Reflective objects
result in lower than actual temperature measurements. These objects
pose a burn hazard.
•Do not look directly into the laser with optical tools (for example,
binoculars, telescopes, microscopes). Optical tools can focus the laser
and be dangerous to the eye.
•Do not look into the laser. Do not point laser directly at persons or
animals or indirectly off reflective surfaces.
•Replace the batteries when the low battery indicator shows to prevent
incorrect measurements.
•Do not use the Product around explosive gas, vapor, or in damp or wet
environments.
•Use the Product only as specified or hazardous laser radiation exposure
can occur.
1.888.610.7664info@Fluke-Direct.com Fluke-Direct.com
62 MAX/62 MAX +
Users Manual
4
Table 1. Symbols
Symbol Meaning Symbol Meaning
Risk of danger. Important
information. See Manual.
This product complies with the
WEEE Directive (2002/96/EC)
marking requirements. The
affixed label indicates that you
must not discard this
electrical/electronic product in
domestic household waste.
Product Category: With
reference to the equipment types
in the WEEE Directive Annex I,
this product is classed as
category 9 "Monitoring and
Control Instrumentation” product.
Do not dispose of this product as
unsorted municipal waste. Go to
Fluke’s website for recycling
information.
1.888.610.7664info@Fluke-Direct.com Fluke-Direct.com
Infrared Thermometer
Safety Information
5
Table 1. Symbols (cont.)
Symbol Meaning Symbol Meaning
Warning. Laser. Conforms to European Union
directives.
Battery Conforms to relevant Australian
standards.
Conforms to China Metrology Certification
1.888.610.7664info@Fluke-Direct.com Fluke-Direct.com
62 MAX/62 MAX +
Users Manual
6
Maintenance
Caution
To avoid damage to the Product, do not leave the thermometer on or near
objects of high temperature.
How to Change the Battery
To install or change the AA IEC LR06 battery, open the battery compartment and replace the
battery as shown in Figure 16.
How to Clean the Product
Use soap and water on a damp sponge or soft cloth to clean the Product case. Carefully wipe
the surface with a moist cotton swab. The swab may be moistened with water. See Figure 17.
1.888.610.7664info@Fluke-Direct.com Fluke-Direct.com
Infrared Thermometer
Specifications
7
Specifications
62 MAX 62 MAX +
Temperature Range -30 °C to 500 °C
(-22 °F to 932 °F)
-30 °C to 650 °C
(-22 °F to 1202 °F)
Accuracy
(Calibration geometry with
ambient temperature 23 °C
±2 °C)
≥0 °C: ±1.5 °C or ±1.5 % of
reading, whichever is
greater
(≥32 °F: ±3 °F or ±1.5 % of
reading, whichever is
greater)
≥-10 °C to <0 °C: ±2 °C
(≥14 °F to <32 °F: ±4 °F)
< -10 °C: ±3 °C
(<14 °F: ±6 °F)
≥0 °C: ±1 °C or ±1 % of
reading, whichever is
greater (≥32 °F: ±2 °F or
±1 % of reading, whichever
is greater)
≥-10 °C to <0 °C: ±2 °C
(≥14 °F to <32 °F: ±4 °F)
< -10 °C: ±3 °C
(<14 °F: ±6 °F)
Response Time (95 %) <500 ms (95 % of reading) <300 ms (95 % of reading)
Spectral Response 8 to 14 microns
Emissivity 0.10 to 1.00
Temperature Coefficient ±0.1 °C/°C or ±0.1 %/°C of reading (whichever is greater)
1.888.610.7664info@Fluke-Direct.com Fluke-Direct.com
Andere Handbücher für 62 MAX
10
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Fluke Thermometer Handbücher
Fluke
Fluke 568 Bedienungsanleitung
Fluke
Fluke 62 MAX Bedienungsanleitung
Fluke
Fluke Nuclear Associates 07-402 Bedienungsanleitung
Fluke
Fluke 1551A Ex Bedienungsanleitung
Fluke
Fluke 65 Gebrauchs- und Pflegehandbuch
Fluke
Fluke 63 Bedienungsanleitung
Fluke
Fluke CNX t3000 Bedienungsanleitung
Fluke
Fluke Series II Bedienungsanleitung
Fluke
Fluke 566 Bedienungsanleitung
Fluke
Fluke 2180A Bedienungsanleitung
Fluke
Fluke 51 Bedienungsanleitung
Fluke
Fluke VT02 Bedienungsanleitung
Fluke
Fluke 5624 Bedienungsanleitung
Fluke
Fluke 561 HVACPro Gebrauchsanweisung
Fluke
Fluke FoodPro Plus Food Safety Therm Bedienungsanleitung
Fluke
Fluke VT06 Bedienungsanleitung
Fluke
Fluke Hart Scientific 1523 Kurzanleitung
Fluke
Fluke 5680 Bedienungsanleitung
Fluke
Fluke Endurance 1RL Bedienungsanleitung
Fluke
Fluke 56X Bedienungsanleitung
