fluxia SMD5730 Bedienungsanleitung
230V LED STRIP - SMD5730
153.821UK, 153.823UK
Installation instruction
Introduction
Thank you for choosing Fluxia high voltage LED strip as part of your lighting scheme. This strip is designed to provide a
powerful linear lighting source for indoor or outdoor installations. Please read these instructions to help with installation
and ensure correct practice when cutting and joining.
Warning: This product is mains operated and should only be fitted by a qualified electrical installer.
Installation
Fluxia 230V LED strip is supplied as a 50m reel with a mains lead connected at one end and terminated with an end-cap
at the other. Straight from the reel, the strip can be plugged into a mains 230Vac outlet and the strip can be situated
indoors or outdoors, thanks to the IP67 containment (the mains lead and plug must be indoors or in a waterproof
housing).
50m is the maximum length that can be powered from a single 230V mains outlet.
The strip can be cut to fit any installation at 1 metre intervals. The strip containment is diffused on all sides with a
transparent centre strip for the bright LED output. Looking at this strip, it is possible to see where the PDB inside is
joined every 1 metre (there is a gap between the ends of the PCB).
Ensure that the strip is not powered before cutting and cut cleanly through the whole containment.
The end of the powered strip will need to be fitted with an end cap (Pack of 10 = 153.853UK), using silicone glue to
secure it. This will also reinstate the waterproof protection to the strip. Fitting shrink-tubing can add additional
weatherproofing and protection.
The remaining strip can likewise be fitted with a new mains lead (153.851UK) to power up as a separate strip and
couplers are also available (153.857UK) to allow strips to be joined together (up to a maximum of 50m). The mains lead
or coupler is connected to the strip via 2-pin connector. This will only make the strip operate if the “+”and “-”are
connected the correct way round. Insert the rounded pins into the mains lead and the pointed pins into the cut end of
the strip.
Before sealing with glue, check the strip operation by plugging the mains plug into a 230V socket. If the strip does not
light, disconnect the strip from the mains and swap the “+”and “-”connections around to check if they were the wrong
way around. When connection is successful, squeeze silicone glue into the joint to ensure a secure and waterproof
connection. Again, shrink tubing can offer additional safety and weatherproofing to the joint.
Joining 2 lengths of strip together is performed in exactly the same way and should again be sealed both sides with
silicone glue. Any open end will need to be sealed with an end-cap and silicone glue. When fixing the strip to a surface, it
is important to not penetrate or damage the containment. Do not pierce with nails, screws or staples. Installation clips
are available for convenient fixing to most surfaces (153.855UK).
Specifications
Stock reference
153.821UK
153.823UK
LED colour temperature
3000K (warm white)
3000K (cool white)
Power supply
200-240Vac, 50Hz
Luminous flux
650lm/m
Power consumption
8.5W/m
LED type
SMD5730
IP rating
IP67 (strip only)
Number of LEDs
60/m
Beam angle
120°
LED lifespan
≥ 30000 hours
Maximum length
50m per mains power lead
Cross-section
13 x 8mm
Mains lead length
0.5m
Dimensions (packed)
285 x 285 x 140mm
Weight
10kg
Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or
Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2016. AVSL Group Ltd.
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere fluxia Beleuchtungsausrüstung Handbücher
Beliebte Beleuchtungsausrüstung Handbücher anderer Marken
Qazqa
Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung
Commercial Electric
Commercial Electric 54568141 Bedienungsanleitung
CREE LIGHTING
CREE LIGHTING 304 Series Bedienungsanleitung
Goobay
Goobay 49867 Bedienungsanleitung
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Bedienungsanleitung
Alkalite
Alkalite Krypton KT-81 Bedienungsanleitung
