Focal 130/165 VRS Bedienungsanleitung

Congratulations on choosing Focal automobile speakers.

Focal speakers remain high quality products, due to the multitude of advanced

materials used. Detailed research and development in the laboratory, from

dedicated engineers and technicians, played a major role in producing such high

performing products. To gain the best results from your speakers, please ensure

you follow these recommendations. f not followed correctly any fault observed,

may not be covered by the guarantee.

Français page 7

THE FOCAL GUARANTEE ONLY APPL ES F PAGE 15 S

RETURNED TO US W TH N 10 DAYS OF PURCHASE.

130/165 VRS

User Manual

Technical advances, included in the

Polyglass range

• Polyglass cones woofer

• TNB aluminum / magnesium inverted dome

tweeter

• Separated crossover, fully optimised with

adjustable level control

High quality components used throughout

• Butyl surround

ncluded

• 2 x woofer / midrange

• 2 x TNB tweeters

• 2 x gaskets

• 2 x crossovers

• fixing screws

• 2 x grilles

Due to constant technological advances, Focal reserves its right to modify specifications without notice. Images may not conform exactly to specific product.

Focal®isatrademarkofFocal-JMlab®-BP374-108,ruedel'Avenir-42353LaTalaudière

cedex-France-Tel.(+33)0477435700-Fax(+33)0477435704-www.focal-fr.com

notice 130-165 vrs.indd 1notice 130-165 vrs.indd 1 7/03/07 15:26:297/03/07 15:26:29

mportant recommendations

Before attempting any installation work, it is very important to verify how much space is

available to fit the speakers into the vehicle

Key points:

• For direct replacement of original speakers, please check there is enough space for your

new Focal speakers and grilles

• Ensure the speaker is clean from debris and metallic particles that maybe attached

(especially after drilling)

• Use the foam gasket supplied (inside the grille), for airtight placement of the speaker into

the panel

• Do not touch the tweeter cone

Choice of installation and positioning the tweeter

To achieve best results for your installation, please follow these simple guidelines

• Use a variety of speakers to achieve a large bandwidth, the most central possible

• Speakers positioned in the most forward location possible, for correct staging

• Tweeters positioned preferably high in the doors or in the dash (if space permitting),

to obtain un-muddled high and midrange frequencies These being directive to the

listener

• To position the tweeters direct in-line to the listeners ears, for improved imaging

Prefered woofer and

mid-range positions.

3 x prefered tweeter

positions

130/165 VRS

User Manual 2

notice 130-165 vrs.indd 2notice 130-165 vrs.indd 2 7/03/07 15:26:307/03/07 15:26:30

Cables and connections

For best results with your speakers, we recommend you include the use of Focal cables

Alternatively, other high quality cable can be used, if sufficient section thickness is available

(minimum thickness = 1mm2) This is particularly important for long lengths of cable to

ensure a strong efficient signal is maintained Always ensure the polarity is respected, (+ is

connected to + and - is connected to -) Maintain correct connections, from principal source

radio / amplifier (left / right / front and rear), and crossover to speakers (tweeter to tweeter, mid

to mid, woofer to woofer), is always observed

Fitting the tweeter

There are two mounting possibilities available: surface or flush mount The tweeter arrives

supplied in its flush-mounting pod Very carefully, remove the grille, by gently prizing it off

(using a paper clip will help)

Surface mounting: choose the angle that best suits your installation (10° or 30°) and mount

the pod firmly using the screws supplied Feed the wire through the hole in the pod and refit

the tweeter and grille in place

Flush mounting: cut a neat 45mm diameter

hole in the panel where you want to place the

tweeter Then with the metal mounting strip held

from behind (ensuring the ends are pointing

towards the hole), insert the screw through the

flush-mount pod from the front and tighten the two

parts together Feed the wire through the hole in

the pod and refit the tweeter and grille in place

Grille

Unlocking tool

Tweeter

Pod

Mounting strip

130/165 VRS

User Manual 3

Sortie droite

Sortie gauche

Woofer

Tweeter

Woofer

Tweeter

Input

notice 130-165 vrs.indd 3notice 130-165 vrs.indd 3 7/03/07 15:26:307/03/07 15:26:30

Fitting the crossover

Locate the crossovers in a dry, preferably

ventilated area, using either the screws

supplied or double-sided tape

To open the box, squeeze the middle on the

side, and remove the cover

In some cases, depending on your installation

and the space available, it maybe easier to

route the cables and connect to the crossover,

before securing the crossover to the vehicle

Please check before

Level adjustment of tweeter and midrange

The toggle switch found inside the crossover, allows the user to adjust the tweeter level

This user-friendly option allows effective adjustments to be made, to your own personal listening

pleasure, plus optimising the infinite amount of speaker installation locations available

This allows the system to be “tailor made” to your vehicle, effectively ensuring the best acoustics

are possible Remember too much treble and your system may sound aggressive, thus suffer a

lose of dynamics, resulting in poor definition

Level position 0 or -3dB, if the tweeter is located very close to woofer-midrange

Level position -3 or -6dB, if the tweeter is located high in the vehicle (in the dash or high in the

doors) with the woofer positioned comparatively low

Level position 0 or -3dB, if the tweeter is located in kick panel

Specifications

How can you improve the sound quality of your speakers?

Easy To improve the sound quality of your speakers notably those installed into the doors,

Focal has the answer Known as “Plain-Chant”, this material acts as a sound absorber, to

effectively reduce unwanted resonances and ensure your speakers produce a more full

sound No-fuss installation ensures this accessory, proves to be a real asset for your Focal

speakers / installation Consult your Focal retailer for further information / advise

Which power for your amplifier?

Access speakers are already highly efficient, with improved sensitivity Therefore, their use with

a high power head unit will produce comfortable listening pleasure

However, if used with a more high-end system, with Focal amplification, the audio quality will

be greatly improved It is very important to ensure that the rated power of the amplifier suits

the speakers used Otherwise, your speakers may distort or possible damage may occur

Always consult the owners manual of the principal source (head unit/amplifier), to ensure the

power rating is compatible A safe guide is to ensure the maximum power of the amplifier is

not greater than the nominal power of the speakers

nstallation upgrade (with the help of a subwoofer)

If you want your system to have bass, with real punch and power, we recommend the inclusion

of a subwoofer This will greatly improve your listening pleasure and give your system, some

real physical dimension

Focal has therefore developed a range of subwoofer drivers and complete subwoofer systems,

to compliment your Polyglass speakers

Consult your local dealer, or check out these exciting products on the Focal Internet site:

www focal-fr com

130/165 VRS

User Manual

130 VRS 165 VRS

Type 2-way kit 2-way kit

Diameter 130mm (5") 165mm (6/12")

Maximum power 100W 120W

Nominal power 50W 60W

Sensitivity (2.8 V/1 m) 91dB 93dB

Frequency response 80Hz – 28kHz 70Hz – 28kHz

Impedance 4 ohms 4 ohms

Fitting diameter 115mm (4-1/2") 141mm (5-9/16")

Mounting depth 48.5mm (1-15/16") 56mm (2-3/16")

notice 130-165 vrs.indd 5notice 130-165 vrs.indd 5 7/03/07 15:26:317/03/07 15:26:31

130/165 VRS

User Manual

Guarantee

All Focal loudspeakers are covered by guarantee drawn up by the official Focal distributor

in your country

Your distributor can provide all details concerning the conditions of guarantee Guarantee

cover extends at least to that granted by the legal guarantee in force in the country where the

original purchase invoice was issued

In addition to Car hi-fi systems, Focal offers personalized solutions for the equipment of your

house Enjoy at home the hi-fi and home cinema sensations provided by the Focal sound

Several product lines by the French leading loudspeaker manufacturer, are at your disposal to

share with you our passion : the Spirit of Sound / www focal-fr com

notice 130-165 vrs.indd 6notice 130-165 vrs.indd 6 7/03/07 15:26:317/03/07 15:26:31

Nous vous remercions d’avoir choisi Focal.

Les haut-parleurs Focal sont des produits de haute technologie, conçus pour

fournir des performances élevées, constantes dans le temps. Aussi, afin de

tirer le meilleur parti de vos haut-parleurs, nous vous recommandons de lire

attentivement cette notice. Tout problème dû à un non respect des règles

d’utilisation peut entraîner l’invalidation de la garantie.

Les technologies Focal - Ligne Polyglass

• Woofer à membrane Polyglass

• Tweeter TNB à dôme inversé en aluminium /

magnésium

• Filtres séparés optimisés avec réglage de niveau,

composants de haute-qualité

• Suspension Butyle longue durée

130/165 VRS

Manuel Utilisateur

POUR VAL DAT ON DE LA GARANT E FOCAL, MERC DE

NOUS RETOURNER LA PAGE 13 DANS LES 10 JOURS

Dans un but d'évolution, Focal- MLab se réserve le droit de modifier les spécifications techniques de ses produits sans préavis. Images non contractuelles.

Focal®estunemarquedeFocal-JMlab®-BP374-108,ruedel'Avenir-42353LaTalaudière

cedex-France-Tel.(+33)0477435700-Fax(+33)0477435704-www.focal-fr.com

Contenu de l'emballage

• 2 x haut-parleurs grave-médiums

• 2 x joints

• 2 x filtres

• vis de fixation

• 2 x tweeters

• 2 x grilles avec supports

notice 130-165 vrs.indd 7notice 130-165 vrs.indd 7 7/03/07 15:26:317/03/07 15:26:31

Recommandations importantes

Avant tout, vérifiez l’espace disponible pour l’encastrement des haut-parleurs (se reporter aux

plans sur l’emballage) puis procédez aux découpes

• Dans le cas d’un montage en emplacement d’origine, vérifiez qu’il y ait un espace suffisant

entre le haut-parleur et la grille de protection

• Tenir les haut-parleurs à l’écart des copeaux métalliques et des poussières Procédez à un

nettoyage soigneux avant de les monter

• Utilisez le joint d’étanchéité fourni dans la grille afin d’assurer une étanchéité parfaite

• Ne touchez pas à la membrane du tweeter

Choix de l’emplacement et orientation du tweeter

Le résultat optimum sera obtenu en respectant quelques règles simples :

• L’image sonore la plus large et la plus centrée sera obtenue par un écartement maximum des

haut-parleurs et par un positionnement le plus à l’avant possible

• Les fréquences médiums et aigues seront favorisées par un emplacement en haut de portière

ou sur le tableau de bord, les fréquences graves sont peu directives et ne sont donc pas

déterminantes pour le choix de l’emplacement du haut-parleur

• L’orientation des tweeters en direction des oreilles de l’auditeur permet d’optimiser l’image sonore

Positionnement possible

des haut-parleurs

de graves et médiums

3 positionnements possibles

des tweeters

130/165 VRS

Manuel Utilisateur

notice 130-165 vrs.indd 8notice 130-165 vrs.indd 8 7/03/07 15:26:327/03/07 15:26:32

Câblage et connexions

Afin de tirer le meilleur parti de vos haut-parleurs, nous vous recommandons d'utiliser des

câbles Focal A défaut, un câble de qualité et de section suffisante (1 mm2 minimum) est

recommandé, surtout si la distance entre l’amplificateur ou l’autoradio et les haut-parleurs

est importante

Veillez à respecter la polarité des branchements (+ sur +, etc ) et la convenable orientation

des câbles vers ampli, grave, ou tweeter

nstallation du tweeter

Il existe deux possibilités de montage : montage en surface et montage encastré Pour installer

le tweeter, vous devez le sortir de son support : retirez la grille en la tirant à l’aide d’un objet

pointu puis utilisez l’outil fourni pour faire tourner le tweeter et le dégager de son logement

Montage en surface :

choisir l’inclinaison (10° ou 30°), fixer le support

avec les vis fournies, passer les fils puis bloquer le

tweeter en le faisant pivoter Remettre la grille

Montage encastré : découper un trou de 45 mm

de diamètre, installer la barrette avec la vis fournie

sur le support Insérer le support et la barrette puis

visser afin que la barrette vienne pincer le support

Passer les fils et bloquer le tweeter en le faisant

pivoter Remettre la grille

Grille

Outil de déblocage

Tweeter

Support

Patte de ﬁxation

130/165 VRS

Manuel Utilisateur

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Focal Autolautsprecher Handbücher

Focal

Focal INSIDE C5 Aircross Bedienungsanleitung

Focal

Focal Utopia Beryllium Line Bedienungsanleitung

Focal

Focal K2 POWER 165 KRX2 Bedienungsanleitung

Focal

Focal Access 165 A3 Bedienungsanleitung

Focal

Focal N 5 Bedienungsanleitung

Focal

Focal IFP 207 Bedienungsanleitung

Focal

Focal K2 Power 130 KRC Bedienungsanleitung

Focal

Focal Polyglass 130 CVX Bedienungsanleitung

Focal

Focal K2 POWER 165 KF Bedienungsanleitung

Focal

Focal Access 1 570 CA1 Bedienungsanleitung

Focal

Focal Utopia Series Bedienungsanleitung

Focal

Focal IC 690 Bedienungsanleitung

Focal

Focal POLYGLASS MULTI SPEAKER Bedienungsanleitung

Focal

Focal Polyglass 130 VRS Bedienungsanleitung

Focal

Focal POLYGLASS 165 V 30 Bedienungsanleitung

Focal

Focal Polyglass 100 VRS Bedienungsanleitung

Focal

Focal Utopia Be 6 W3 Be Bedienungsanleitung

Focal

Focal Spirit of Sound Bedienungsanleitung

Focal

Focal Access 1 100 CA1 Bedienungsanleitung

Focal

Focal Polyglass 100 CVX Bedienungsanleitung

Focal

Focal IS 165 Bedienungsanleitung

Focal

Focal K2 POWER 130 KF Bedienungsanleitung

Focal

Focal Polyglass 130 V1 Bedienungsanleitung

Focal

Focal UNIVERSAL ISN Bedienungsanleitung

Beliebte Autolautsprecher Handbücher anderer Marken

Blaupunkt

Blaupunkt GTt 300 Technisches Datenblatt

Boston Acoustics

Boston Acoustics SX55 Bedienungsanleitung

Kenwood

Kenwood KFC-W212 Bedienungsanleitung

VR3

VR3 Elite VRS653 Bedienungsanleitung

Premier

Premier TS-W3001D4 Bedienungsanleitung

Infinity

Infinity 6530cx Bedienungsanleitung

Precision Power

Precision Power PPI4.2 Bedienungsanleitung

Jensen

Jensen XS Series Bedienungsanleitung

Blaupunkt

Blaupunkt GTx Series Bedienungsanleitung

AudioBahn

AudioBahn AT60 Bedienungsanleitung

Blueant

Blueant S1 Bedienungsanleitung

Naxa

Naxa NCS-768 Bedienungsanleitung

Boston Mobile Audio

Boston Mobile Audio SR80 Bedienungsanleitung

Blaupunkt

Blaupunkt GTx 352 DE Bedienungsanleitung

Blaupunkt

Blaupunkt GTt 1200 Mk II Bedienungsanleitung

Pioneer

Pioneer TS-D1320C - Car Speaker - 35 Watt Bedienungsanleitung

JBL

JBL GTO327 Bedienungsanleitung

Blaupunkt

Blaupunkt Blue MaQiC CL 100 Bedienungsanleitung