Fondital BLITZ FD

INSTALLATION AND

MAINTENANCE MANUAL

BLITZ FD_

Aluminium electric

radiators with heat

transfer ﬂuid

IST 03 F 017 - 01

Dear customer,

Thank you for choosing our product. Read this manual carefully before installing your radiator, as it provides useful information for

installation, use and proper maintenance of the appliance.

Remember that this manual must accompany the radiator should it be moved to a diﬀerent installation location.

THE PACKAGE INCLUDES:

Aluminium radiator ﬁtted with a thermostat with electronic regulation, kit made up of three mounting brackets with wall plugs and instruction

manual.

CONTENTS

1. CHARACTERISTICS Page 3

2. DESCRIPTION AND TECHNICAL SPECIFICATIONS OF THE PRODUCT Page 3

3. WARNINGS Page 4

4. INSTALLATION Page 4

5. ELECTRICAL CONNECTIONS Page 7

6. REGULATION AND PROGRAMMING Page 9

7. CLEANING THE RADIATOR Page 13

8. TROUBLESHOOTING Page 14

9. ENVIRONMENT Page 14

10. DECLARATION OF CONFORMITY Page 15

1. CHARACTERISTICS

1.1. Characteristics of the appliance

IPX4 : appliance protected against splashing water

Class II: double insulation

1.2. Technical characteristics of the electronic part

Power supply 230V +/-10% AC 50 Hz

Electrical resistor capacity Mod. FD5806 600 W

Mod. FD5810 1000 W

Mod. FD5812 1200 W

Mod. FD5815 1500 W

Mod. FD5818 1800 W

Mod. FD5820 2000 W

Insulation class Class II

Water protection rating IPX4

Operating temperature 0 ÷ 40°C

Storage temperature -20 ÷ 80°C

Relative humidity RH 0 ÷ 85% without condensate

Regulation type Proportional integral

Temperature range 7° ÷ 35°C

Temperature reading resolution 1/16°C

Maximum range 0.5°C

Maximum deviation 1.5 °C

2. DESCRIPTION AND TECHNICAL SPECIFICATIONS OF THE PRODUCT

The radiator has a die-cast EN AB 46100 aluminium alloy body containing a ﬂuid to transmit heat internally. This ﬂuid is made up of highly reﬁned

mineral oil with a high heat transmission coeﬃcient, characterized by high oxygenation resistance for durability and low viscosity.

The internal ﬂuid is heated by means of an electrical resistor with class II insulation, which has a control thermostat and safety thermal fuse.

The control and regulation electronics make it possible to regulate the ambient temperature with great precision.

On the left-hand side there is a receptacle for distilled water used to humidify the environment.

NB: All Fondital radiators are manufactured with an identifying label which guarantees their traceability.

This label certiﬁes that the appliance complies with European directives and electrical standards.

The appliance must be installed according to accepted practice, in accordance with current standards and the

instructions contained in this manual.

Radiator colour: RAL 9010.

3. WARNINGS

A label on the side of the radiator contains the symbol shown here. The meaning of this symbol is:

In order to avoid overheating the appliance, DO NOT COVER THE RADIATOR with clothing, pieces of cloth or other objects.

The radiator must never be:

- partially or totally covered

- in direct contact with or a short distance from curtains, furniture, etc.

The radiator must never be installed:

- in an alcove

- less than 10 cm. from the corners of the room

- beneath a power point

- on a shelf

The radiator must be mounted on the wall using the standard mounting brackets included.

All work required on the appliance must be performed by a qualiﬁed professional.

Repairs which require opening the liquid reservoir must be made by the manufacturer, its representatives or customer service.

4. INSTALLATION

To obtain the best results from your appliance in terms of thermal output and comfort, we recommend installing the radiator under a window or

near areas of the space to be heated with high thermal dispersion, whenever possible.

The radiator must not be installed in an alcove or beneath a power point.

Curtains, furniture and objects which may obstruct proper heat distribution must be placed a minimum of 50 cm. from the front of the radiator.

Maintain a minimum space of 120 mm between the lower part of the radiator and the ground.

4.1. Mounting the radiator to the wall

The radiator can be mounted on the wall using the mounting brackets included with the appliance. The mounting system consists of:

When mounting, follow the steps illustrated below:

x2x2

1 2

Number of sections

5 7 9 11 12 14

Dimension A 160 240 320 400 400 480

Dimension B 80 160 240 320 400 400

Dimension C 500 500 500 500 500 500

3 4

5 6

The step shown in illustration 6 can only be conside-

red ﬁnished when the lower screw has been comple-

tely tightened and the radiator is ﬁrmly attached to

the wall, with no possible movement.

The minimum distance between the radiator and the ﬂoor must be

120 mm in all cases.

5. ELECTRICAL CONNECTIONS

IMPORTANT

During installation, maintenance and cleaning, the appliance must be disconnected from the power supply.

The appliance must be attached to a 230 VAC power supply only. Follow the colours indicated:

Brown Phase

Blue or grey

Neutral

Black Pilot Wire

Note:

The pilot wire is used only in radiators sold in France.

If the (black) pilot wire is not in use, regulations require that it be isolated. Never connect it to the earth lead for any reason.

A multi-pole circuit breaker must be installed. The distance between the contacts must be at least 3 mm.

The appliance’s power circuit must be protected by a high sensitivity diﬀerential protection device.

The power cord must be connected to the power supply using a shunt box located 25 cm from the ground, without the use of an electrical plug.

Never insert metal objects into or attempt to pierce the side of the radiator containing the regulation system (right side).

If the power cord is damaged, it must be replaced by a qualiﬁed electrician only.

5.1. Details of bathroom installation

The appliance must be installed according to current regulations and laws in the country of use.

The radiator is class II and has IPX4 electrical protection. In bathrooms, it can be installed in areas 2 and 3 (see ﬁgure 1) on condition that the control

device is not within reach of people using the shower or bathtub.

The radiator must not be connected to the earth lead.

In the bathroom, protect the power line with a 30 mA high sensitivity diﬀerential device.

Install a multi-pole circuit breaker. The distance between the contacts must be at least 3 mm.

2,5 m

ﬁg. 1

AREA 0

AREA 1

AREA 2

AREA 3

6. REGULATION AND PROGRAMMING

6.1. Turning the radiator on

The appliance is regulated using four keys, as shown in the ﬁgure. When the appliance is in stand-by mode, the black dot on the screen will blink. To

turn the radiator on, press the‘on/oﬀ’ key, as shown in the following ﬁgure:

There is an LED light on the control panel: when the system is in heating mode and the room temperature has not yet reached the desired tempe-

rature programmed by the user, the LED is RED. Once the room reaches the programmed temperature, the LED turns GREEN.

6.2. Changing the mode

Press the‘mode’key to select the desired mode:

ICON INDICATING THE

SELECTED MODE

PROGRAMMED TEMPERATURE

LED

The radiator has various operating modes, as shown in the table on page 13.

When the radiator is in clock mode, the screen shows the time; in the other modes it shows the programmed temperature. A small icon indicates the

current mode.

6.3. Programming TH and TL temperatures

It is possible to programme two separate temperature levels: TH is the desired ambient temperature during operation in Comfort and Pilot Wire

mode or when programming; TL is the ambient temperature in Night-time Reduction mode.

These two temperature levels can be programmed using the plus and minus keys. A blinking temperature icon on the screen indicates that the

temperature is being programmed.

TH can be programmed in Comfort mode, TL can be programmed in Night-time Reduction mode.

The two temperature levels are also used when programming:

02468101214161820

THERMOMETER

TEMPERATURE

TIME

6.4. Setting times and weekly programming

Press the‘stand-by’ and ‘mode’keys at the same time and hold for three seconds.

A dot will blink on the screen next to the days of the week (1-7). The current day can be selected using the plus or minus key. Use the ‘mode’key to

conﬁrm the selection.

The number corresponding to the hour will blink. Programme the correct time using the plus and minus keys. Conﬁrm the selection with the ‘mode’

key.

The number corresponding to the minutes will blink. Programme the correct minutes using the plus and minus keys. Conﬁrm the selection with the

‘mode’key.

TH is the desired ambient temperature during the time periods selected; TL is the (reduced) desired temperature outside the selected time

periods.

Inhaltsverzeichnis

Andere Fondital Heizung Handbücher

Fondital

Fondital eCool ED 300 W Bedienungsanleitung

Fondital

Fondital AL-ADVANCE Handbuch

Fondital

Fondital Alcor FDR Handbuch

Fondital

Fondital desertus fa series Handbuch

Fondital

Fondital 2200 Gebrauchsanweisung

Fondital

Fondital e BLITZ VA3110 Bedienungsanleitung

Fondital

Fondital DECUS Bedienungsanleitung

Fondital

Fondital IST 03 F 014 - 02 Handbuch

Fondital

Fondital WHPS BA SS Handbuch

Fondital

Fondital Mood-Tribeca Bedienungsanleitung

Fondital

Fondital eBLITZ Core Handbuch

Fondital

Fondital Cool Series Bedienungsanleitung

Fondital

Fondital eGarda Bedienungsanleitung

Fondital

Fondital gazelle techno classic Bedienungsanleitung

Fondital

Fondital eBLITZ GD5806 Bedienungsanleitung

Fondital

Fondital eBlitz Wi-fi Bedienungsanleitung

Fondital

Fondital DIMENSION L Bedienungsanleitung

Fondital

Fondital Alcor FA Handbuch

Fondital

Fondital Garda S/90 AC Series Bedienungsanleitung

Fondital

Fondital Garda DUAL/80 Bedienungsanleitung

Beliebte Heizung Handbücher anderer Marken

oventrop

oventrop Regucor Series Bedienungsanleitung

Blaze King

Blaze King CLARITY CL2118.IPI.1 Bedienungsanleitung

ELMEKO

ELMEKO ML 150 Bedienungsanleitung

BN Thermic

BN Thermic 830T Bedienungsanleitung

KING

KING K Series Leitfaden

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Kurzanleitung

Well Straler

Well Straler RC-16B Bedienungsanleitung

EUROM

EUROM 333299 Bedienungsanleitung

Heylo

Heylo K 170 Bedienungsanleitung

Eterna

Eterna TR70W Bedienungsanleitung

Clarke

Clarke GRH15 Bedienungsanleitung

IRSAP

IRSAP The Radiator Company Ovali Bedienungsanleitung

Empire Heating Systems

Empire Heating Systems WCC65 Bedienungsanleitung

Wetekom

Wetekom 92 86 43 Bedienungsanleitung

Desa

Desa SPC170-F Bedienungsanleitung

Watlow

Watlow Watrod Electric Tubular Heaters Bedienungsanleitung

Haverland

Haverland ECO-DRY GPS Series Stücklistenhandbuch

Stelpro

Stelpro ASILVC2060 Series Bedienungsanleitung

Fondital BLITZ FD_ Handbuch

Beliebte Heizung Handbücher anderer Marken