EN
- 9-
Editing program and event
Select the program number required and scroll through the different configuration options of each of the
existing events. Place the cursor on the parameter you wish to edit and use the UP and DOWN navigation
buttons to modify the specifications.
Adding an event to a program
Select the required program number, use the LEFT and R GHT navigation buttons and place the cursor on
the Add option. Press the confirmation button to add a new event in the selected program.
f you wish to edit or modify this new event or any of those already created, scroll through the different
configuration options of the event and use the UP and DOWN navigation buttons to select the execution
time and the type of playback you wish to implement.
Deleting an event
Firstly select the required program and then, use the navigation buttons to select the event in that program
you wish to delete. Place the cursor on the Delete (Del) option and press the confirmation button to delete
the event of the selected program.
Deleting all the events of a program
Select the required program number and use the LEFT and R GHT navigation buttons to place the cursor on
the Delete All (Del All) option. Press the confirmation button to delete all the events of the selected program.
Exiting
Select the Exit option to exit the Edit Program menu and return to the main menu.
Note: each one of the 5 programs accepts a maximum of 200 different events and the device, in total, a
maximum of 512 different events.
STANDBY PROGRAM
The standby program corresponds to the program number 5 in the Edit Program). This program is only
activated with the SW FT button on the front panel of the device and will have priority over the rest of
programmed configurations.
The standby program is executed at a set time according to the programming of events, but the day on
which it is executed cannot be assigned in the System Setting), that’s to say, this program cannot be assigned
to a specific day in the weekly setting.
The standby program can be configured on the current day, the following day or both options at the same
time. Press the SW FT button on the front panel of the device when the display shows the general information
so that the standby program is the priority option.
Press the SW FT button repeatedly to select the days on which the standby program is executed. Below the
different options for executing the standby program are described:
: the standby program is executed on the present day.
: the standby program is executed on the following day.
: the standby program is executed on the present day and on the following day.
f none of these parameters are shown on the screen, the standby program is not activated, consequently
the amplifier will maintain the weekly programming currently configured.
