FONESTAR ZSM-1050 Bedienungsanleitung

ZSM-1050

MESSAGE PROGRAMMER, EVENTS AND

BACKGROUND MUSIC PLAYER

WITH 4 OUTPUT ZONES

INSTRUCTION MANUAL

ZSM-1050_MANUAL_(EN)_20190425.qxp_Maquetación 1 25/4/19 9:33 Página 1

TABLA DE CONTENIDO

- Security and Environment..........................................................................................................

- Signiﬁcance of the symbols on the machine.............................................................................

1. Description.................................................................................................................................

2. Basic steps recommended for installation/conﬁguration of ZSM devices................................

3. New connections.......................................................................................................................

Access data ...............................................................................................................................

Options ......................................................................................................................................

Groups.......................................................................................................................................

Select device in LAN..................................................................................................................

4. Basic controls............................................................................................................................

Icon buttons...............................................................................................................................

Right click on the device ...........................................................................................................

5. Conﬁguration .............................................................................................................................

General ......................................................................................................................................

Inputs/Outputs...........................................................................................................................

Audio..........................................................................................................................................

Comunications...........................................................................................................................

SIP .............................................................................................................................................

6. File manager ..............................................................................................................................

Background music.....................................................................................................................

Messages ..................................................................................................................................

Alarms........................................................................................................................................

7. Background music.....................................................................................................................

8. Scheduled messages ...............................................................................................................

New message ...........................................................................................................................

9. Alarms........................................................................................................................................

Alarm conﬁguration ...................................................................................................................

10. Direct messages ........................................................................................................................

New direct message..................................................................................................................

11. Dashboard window ...................................................................................................................

12. Exporting and importing ............................................................................................................

Export ........................................................................................................................................

Import ........................................................................................................................................

13. Updating ...................................................................................................................................

Remote method (Internet or LAN)..............................................................................................

14. Local control of ZSM-1050 device ............................................................................................

15. Controls and functions ..............................................................................................................

16 Technical speciﬁcations ............................................................................................................

Warranty ....................................................................................................................................

- 2 -

ZSM-1050_MANUAL_(EN)_20190425.qxp_Maquetación 1 25/4/19 9:33 Página 2

We take this opportunity to thank you for buying this product.

We recommend you read the instruction manual before switching on the machine and follow the instructions

that are given. Keep the manual for future reference.

SECURITY AND THE ENVIRONMENT

ELECTRICAL SECURITY

Check that the current in the mains connection where the machine is to be installed corresponds to the

power supply of the machine.

To avoid damaging the equipment, electrical shocks, ﬁre or physical injury when you connect or disconnect

the equipment from the power supply, pull the plug ﬁrmly out of the mains socket holding the plug, never the

cable.

Always do this with dry hands.

Keep the power supply cable far from sources of heat. Do not put heavy objects on top of it or change it.

Clean dust and dirt off the power supply cable regularly.

Do not open the machine; you could get an electric shock.

CAUTION

While installing the machine, make sure it is switched off and unplugged.

Do not open the machine. Touching the internal parts is dangerous and you could receive an electric shock.

The machine must not be splashed or dripped on. Never place recipients with liquid inside on the machine.

Do not place anything inside the machine.

LOCATION

Place the equipment on a horizontal surface with enough space around it to allow ventilation.

Avoid direct sunlight, heat sources and excessive dust.

Do not place the machine near magnetic ﬁelds or static electricity.

Do not use surfaces which vibrate or receive impact.

Do not pile machines on top of one another.

VENTILATION

Never block or cover the ventilation slits on the machine.

Do not expose it to direct sunlight or place it near sources of heat.

PERIODS OF INACTIVITY

When the machine is not going to be used for a long period of time, disconnect it from the mains.

If you are using an adapter, take into account that it will continue using electricity even if the machine is

switched off. If it is not going to be used for a long period of time, disconnect it from the mains.

THE ENVIRONMENT

To save energy, switch the machine off when you are not going to use it for a long time. The machine could

contain substances that are harmful to the environment or human health. To minimize the effect of these

substances the machine must be correctly managed and recycled when you decide to dispose of it.

When you dispose of it remember: it cannot be thrown into a conventional rubbish bin.

If it contains or uses batteries, these must be disposed of separately.

The machine (without batteries) must be disposed of correctly. Put it in a container specially intended for the

collection of electronic and electrical appliances, at the dump or hand it over to the dealer when you purchase

similar equipment, so that the dealer can dispose of it correctly (at no added cost).

- 3 -

ZSM-1050_MANUAL_(EN)_20190425.qxp_Maquetación 1 25/4/19 9:33 Página 3

SIGNIFICANCE OF THE SYMBOLS ON THE MACHINE*

The symbol formed by the expression “Class 1 laser product” written in a rectangle

indicates that visible or invisible laser radiation could be produced. Avoid direct expose to

the laser.

The symbol formed by a ray of lightening inside a triangle shows that the machine has

connection terminals or a circuit with areas with a current which could cause an electric

shock, even in normal working conditions.

The symbol formed by an exclamation mark in a triangle shows that the instruction manual

must be referred to for information on how the machine works and its use.

The symbol formed by one square inside another square shows that the machine has

double electrical insulation.

The European Community symbol shows that the machine complies with the current

European Union legislation, as well as its transposition to local legislation.

The symbol of a rubbish bin crossed out and over a horizontal line shows that when the

product is disposed of it must be done properly, placing it in a special selective electronic

and electrical equipment container or through a dealer when purchasing a similar product,

at no additional cost. It also shows that the machine was put on the market after 13th

August 2005 (European Community Directive 2002/96/CE of Electrical and Electronic

recycling, and its Spanish equivalent R.D.208/2005).

In accordance with what is set out in the aforementioned decree, FONESTAR is registered

in the RAEE (Registro de Aparatos Eléctricos y Electrónicos) in a special section REI

(Registro de establecimientos Industriales), with the entry number 001851.

*It is possible that some of these symbols do not appear on the machine.

EXEMPTION OF LIABILITY

The characteristics of the equipment and the content of the manual can change without forewarning.

FONESTAR, S.A. does not assume responsibilities regarding the inappropriate use of the equipment or the

information supplied in this instruction manual, and speciﬁcally disclaims any implied liability for marketability

or ﬁtness for any other use.

- 4 -

ZSM-1050_MANUAL_(EN)_20190425.qxp_Maquetación 1 25/4/19 9:33 Página 4

1. DESCRIPTION

- Message programmer, alarms, background music player and SIP client with 4 output zones.

-4 independently conﬁgurable zones (aux input, background music, scheduled messages, instant

messages, alarms and SIP call).

- 16 GB internal memory for audio ﬁles. Compatible formats: MP3, WMA, WAY and OGG.

- USB storage device and SD memory card for updating the device and audio ﬁle storage.

- Remote control using ZSM-GO: status control, scheduling and audio ﬁle transfer.

- Autonomous operating without the need to be connected to the ZSM-GO program.

2. BASIC STEPS RECOMMENDED FOR INSTALLATION/CONFIGURATION OF

ZSM DEVICES

1.- Make sure the device is connected to the local network.

In the ZSM-1050 device itself, enter the Conﬁguration menu -> Network -> Status.

If it appears as “disconnected”, check the conﬁguration of your network, the connection of the device,

the Ethernet cable, etc. If necessary, set up a ﬁxed IP address in the Set up menu -> Network -> Edit.

To connect to a ZSM device via internet, the TCP communications port and the UDP transfer port must

be redirected.

The easiest way to accomplish this is by assigning a ﬁxed IP address to the device and then, redirecting

the two ports in the router to this ﬁxed IP address.

2.- Use the ZSM-GO program to create a new connection and so be able to connect with the device (see

New Connections section).

3.- Use the ZSM-GO program to conﬁgure the device (see Conﬁguration section). The following parameters

can be conﬁgured: General, Inputs/Outputs (I/O), Audio and Communications.

4.- Transfer the audio ﬁles from the ZSM-GO program to the device.

5.- Using the ZSM-GO program set up background music, scheduled messages, direct messages and

alarms (see corresponding sections).

- 5 -

ZSM-1050_MANUAL_(EN)_20190425.qxp_Maquetación 1 25/4/19 9:33 Página 5

- 6 -

3. NEW CONNECTIONS

In order to connect to the ZSM-1050 device, create a new connection with the new option in the General

dropdown menu:

Create access to ZSM-1050:

ACCESS DATA

- Name: the name which identiﬁes the access to the device.

- Device type: type of device to which you are connecting.

- Connection mode.

- Manual mode: connects to a device using an IP, port, user and access password (default 1111).

-Automatic mode (LAN only): the device is connectable provided that it is connected to the local

network. It is only necessary to specify the access password (default 1111): You must select a device

from the local network by pressing the ”Select device on LAN” button.

- IP: IP address of the device.

- Control port: TCP port that the device listens to, controlled remotely.

-Network name: name of the device which, together with the password, make up the connection

credentials

.Connection timeout: maximum waiting time, at TCP/IP level, before closing the connection. It is

recommended that the default value be used.

ZSM-1050_MANUAL_(EN)_20190425.qxp_Maquetación 1 25/4/19 9:33 Página 6

OPTIONS

-Connect when starting the application: When launching the application, an attempt will be made to

connect to the device.

-Automatic reconnection: Only in automatic mode. Whenever a device is available on the local network

and is not connected, it will connect automatically to it.

-Synchronize date and time when connecting: the device will conﬁgure the time and date of the PC upon

each connection.

GROUPS

Shows the groups created so that the connection can be assigned to one or more of them.

SELECT DEVICE IN LAN

Press the button to display a list of devices connected to the local network. Select one and press OK or

double-click to load the required data into the connection:

Once the conﬁguration parameters have been entered, click on the Devices menu option, and the window

with access to all the conﬁgured devices will appear. Double-click (or right-click ->Connect) to connect to

the system. If you added access to one or more groups, you can access them in the Groups option of the

menu.

- 7 -

ZSM-1050_MANUAL_(EN)_20190425.qxp_Maquetación 1 25/4/19 9:33 Página 7

- 8 -

4. BASIC CONTROLS

There are several options when it comes to operating a connected device.

ICON BUTTONS:

RIGHT-CLICK ON THE DEVICE:

- Dashboard: screen where the current status of the device can be seen and all it's functions

can be accessed.

- File manager: audio ﬁle management and transfer.

- Conﬁgure: device conﬁguration

- Playback control: background music control and conﬁguration

- Messages: message conﬁguration

- Alarms: conﬁguration of the sensors as alarms.

- Direct messages: instant message conﬁguration and application

- Export data from device: create a backup copy of the contents of a device and download

them to the PC.

- Import data to device: Upload the backup copies to the device.

- Disconnect: disconnect from the device.

Help.

Show/Do not show list of next messages.

Information about the device: time and date, IP

address, network name, ports, current status.

Open background music control window.

Open dashboard window.

Stop current event (message, instant message

or alarm).

SIP server connection status

Hide this window.

ZSM-1050_MANUAL_(EN)_20190425.qxp_Maquetación 1 25/4/19 9:33 Página 8

SIP connection status

If the device has been conﬁgured to connect to a SIP server, then an icon representing the current state of

the connection will be displayed.

(orange) Attempting to connect to the SIP server

(green) Connection established

(red) Connection error

(green) SIP call in progress

5. CONFIGURATION

There are 2 ways of accessing the device conﬁguration:

- Right button -> Conﬁgure

- From the display: “Dashboard -> “Conﬁguration”

GENERAL

-System time and date: shows the current time and date in the ZSM device. If the “Synchronize with PC”

option is pressed, the ZSM device automatically acquires the time and date in the PC.

-Screen: activates the screensaver after a period of inactivity with the buttons on the front panel of the

device.

-Local lock: activated or deactivated. When activated, a 4 digit password is necessary to unlock the

device, allowing modiﬁcations to be made to the device locally using the button pad.

- 9 -

ZSM-1050_MANUAL_(EN)_20190425.qxp_Maquetación 1 25/4/19 9:33 Página 9

INPUTS/OUTPUTS

- Relay sleep mode: Mode in which the relays are normally in when not activated.

- Sensor activation: Alarm activation conﬁguration (see section on alarms).

AUDIO

- Volumes: Each type of audio has its own volume control.

- Sound: Mono or stereo output.

-Default Zone Output: Indicates the default audio source in the zone. Options include: "Background

music", "Aux input" or "No audio".

- 10 -

ZSM-1050_MANUAL_(EN)_20190425.qxp_Maquetación 1 25/4/19 9:33 Página 10

Inhaltsverzeichnis

Andere FONESTAR MP3-Player Handbücher

FONESTAR

FONESTAR FS-2909U Bedienungsanleitung

Beliebte MP3-Player Handbücher anderer Marken

Blaupunkt

Blaupunkt Compact Drive MP3 Bedienungsanleitung

Memorex

Memorex MMP9008 - 8GB USB 2.0 Bedienungsanleitung

Meizu Electronic Technology

Meizu Electronic Technology E5 Bedienungsanleitung

Naxa

Naxa NMV-173NX Bedienungsanleitung

Philips

Philips PSA250 Bedienungsanleitung

Zipy

Zipy go! Waving Bedienungsanleitung

Sylvania

Sylvania SMPK4068 Bedienungsanleitung

Sony

Sony NW-MS7 - Memory Stick Walkman Bedienungsanleitung

Irradio

Irradio RF-42UC Bedienungsanleitung

NABAIJI

NABAIJI SWIM MUSIC 100 Bedienungsanleitung

Laser

Laser MP3-A9-4GB Bedienungsanleitung

Samsung

Samsung YP-T7F Bedienungsanleitung

Savant

Savant SMS-1001-00 Kurzanleitung

Trevi

Trevi XP 71 BT Bedienungsanleitung

AGPtek

AGPtek C2 Bedienungsanleitung

MobiBlu

MobiBlu DAH-1500i Bedienungsanleitung

Denver

Denver MPS-201 Bedienungsanleitung

Steren

Steren MP3-002 Bedienungsanleitung