FOR-A HVS-3800HS Kurzanleitung zur Einrichtung

HVS-3800HS

HVS-3800S

Digital Video Switcher

(3rd Edition - Rev.2 - 2008/03/06)

CONNECTO

INFORMATION

 ALARM Connector

Pin Assignment Table (9-pin D-sub female)

Pin No. Signal Name Description

1 FAN ALARM OUT Fan failure alarm. Normally open.

2 POWER ALARM OUT Power supply failure alarm. Normally open.

3 EXTALARM COMMON Not used

4 EXTALARM OUT Not used

5 RESET IN External reset input. Active low initiate.

6 FAN ALARM COMMON Fan alarm common.

7 POWER ALARM

COMMON Power supply alarm common.

8 GND Common ground

9 GND Common ground

*Max. contact load of 0.8A DC.

Cable Connectors

9-pin D-sub connector (male) with inch security lock screws needed for user cable

fabrication.

Fan alarm

Pins 1, 6 remain OPEN during normal operation. If fan failure occurs at HVS-3800HS/S side,

pins 1, 6 will short and fan alarm signal output occurs.

Power supply alarm

Pins 2, 7 remain OPEN during normal operation. If a power supply failure occurs, pins 2, 7

will short and power supply alarm signal output occurs.

External reset

External reset signal input to pin 5, shorts pin 8 to pin 9. MUreset occurs when short initiated.

 EDITOR Connector

Pin Assignment Table (9-pin D-sub, female)

Pin No. Signal Name Description

1 FG Frame ground

2 T- Transmit data (-)

3 R+ Receive data (+)

4 SG Signal ground

5 - Not used

6 SG Signal ground

7 T+ Transmit data (+)

8 R- Receive data (-)

9 FG Frame ground

Cable Connectors

9-pin D-sub connector (male) with inch security lock screws needed for user cable

fabrication.

 RS-422 Connector

Pin Assignment Table (9-pin D-sub, female)

Pin No. Signal Name Description

1 FG Frame ground

2 R- Receive data (-)

3 T+ Transmit data (+)

4 SG Signal ground

5 - Not used

6 SG Signal ground

7 R+ Receive data (+)

8 T- Transmit data (-)

9 FG Frame ground

Cable Connectors

9-pin D-sub connector (male) with inch security lock screws needed for user cable

fabrication.

 GPI IN Connector

Pin Assignment Table (15-pin D-sub, female)

Pin No. Description

1 TRANS-TYPE M/E1-BKGD-AUTO (default setting)

2 TRANS-TYPE M/E1-KEY1-AUTO (default setting)

3 TRANS-TYPE M/E1-KEY2-AUTO (default setting)

4 TRANS-TYPE M/E1-KEY3-AUTO (default setting)

5 TRANS-TYPE M/E2-BKGD-AUTO (default setting)

6 TRANS-TYPE M/E2-KEY1-AUTO (default setting)

7 TRANS-TYPE M/E2-KEY2-AUTO (default setting)

8 TRANS-TYPE M/E2-KEY3-AUTO (default setting)

9 No assignment (default setting)

10 No assignment (default setting)

11 N/C

12 N/C

13 Signal ground

14 Signal ground

15 Signal ground

*Where “default” in table above denotes factory set default pin assignments.

Cabling

15-pin D-sub connector (male) with inch security lock screws needed for user cable

fabrication.

Pin Free Assign

Pin1 to 10 signal assignments shown above are factory default settings. These can be

changed in operational menus. See section 16-1-1. “GPI IN Free Assignments” for more

details.

Circuit

HVS-3800HS/S

VccVcc

External Device

Open corrector

HVS-3800HS/S

VccVcc

External Device

Switch or Relay

 GPI/TALLY OUT Connector

Pin Assignment Table (25-pin D-sub female)

Pin No. Description

1 M/E1-BKGD TRANSITION (default setting)

2 M/E1-KEY1 TRANSITION (default setting)

3 M/E1-KEY2 TRANSITION (default setting)

4 M/E1-KEY3 TRANSITION (default setting)

5 M/E2-BKGD TRANSITION (default setting)

6 M/E2-KEY1 TRANSITION (default setting)

7 M/E2-KEY2 TRANSITION (default setting)

8 M/E2-KEY3 TRANSITION (default setting)

9 Not assigned (default setting)

10 Not assigned (default setting)

11 Not assigned (default setting)

12 Not assigned (default setting)

13 Not assigned (default setting)

14 Not assigned (default setting)

15 Not assigned (default setting)

16 Not assigned (default setting)

17 Not assigned (default setting)

18 Not assigned (default setting)

19 Not assigned (default setting)

20 Not assigned (default setting)

21 Frame ground

22 Frame ground

23 Frame ground

24 Frame ground

25 +5V output (MAX 0.5A) (*1)

*Where “default” in table above denotes factory set default pin assignments.

Cabling

25-pin D-sub connector (male) with inch security lock screws needed for user cable

fabrication.

(*1) Max. contact load of 0.5ADC.

Pin Free Assign

Pin1 to 20 signal assignments shown above are factory default settings. These can be

changed in operational menus. See section 16-1-2. “GPI OUT Free Assignments” for more

details.

Circuit

Max voltage: 40V

External DeviceHVS-3800HS/S

Max load current:

100mA

Andere Handbücher für HVS-3800HS

Dieses Handbuch passt für folgende Modelle

Andere FOR-A Schalten Handbücher

FOR-A

FOR-A HVS-390HS Bedienungsanleitung

FOR-A

FOR-A HVS-492OU Bedienungsanleitung

FOR-A

FOR-A HVS-490 Bedienungsanleitung

FOR-A

FOR-A HVS-390HS Bedienungsanleitung

FOR-A

FOR-A HVS-300HS Bedienungsanleitung

FOR-A

FOR-A HVS-600HS Bedienungsanleitung

FOR-A

FOR-A HVS-350HS Bedienungsanleitung

FOR-A

FOR-A MFR-4000R Bedienungsanleitung

FOR-A

FOR-A VSF-6496 Bedienungsanleitung

FOR-A

FOR-A MFR-4100 Bedienungsanleitung

FOR-A

FOR-A MFR-1000 Bedienungsanleitung

FOR-A

FOR-A VPS-700 MU Bedienungsanleitung

FOR-A

FOR-A MFR-6000R Bedienungsanleitung

FOR-A

FOR-A HVS-6000 Bedienungsanleitung

FOR-A

FOR-A MFR-6100 Bedienungsanleitung

FOR-A

FOR-A HVS-AUX8 Bedienungsanleitung

FOR-A

FOR-A MFR-5000 Bedienungsanleitung

FOR-A

FOR-A MFR-1616 Bedienungsanleitung

FOR-A

FOR-A MFR-5000 Bedienungsanleitung

FOR-A

FOR-A MFR-6100 Bedienungsanleitung

FOR-A

FOR-A MFR-3100EX Bedienungsanleitung

FOR-A

FOR-A HVS-100 Bedienungsanleitung

FOR-A

FOR-A MFR-4000 Bedienungsanleitung

FOR-A

FOR-A MFR-3000 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung