Force America ONE SSC5100ex Gebrauchsanweisung

FORCE America ONETM

Quick Start Manual

FORCE America ONETM Quick Start Manual

Welcome and Table of Contents

Welcome

Congratulations on your purchase of a FORCE America ONETM joystick and spreader control.

This manual is designed to provide you with the basic information necessary to get your new

system up and running. For advanced operation and calibration features related to the

SSC5100ex Spreader Control please consult M0118 SSC5100ex Operation Manual or M0119

SSC5100ex Calibration Manual.

Table of Contents

Welcome ...........................................................................................................i

Table of Contents.............................................................................................i

Hardware..........................................................................................................1

FORCE America ONETM System Operation...................................................2

Powering up the SSC5100ex ............................................................................................... 2

The Operation Screen........................................................................................................... 3

Remote Controls Operation............................................................................................... 10

FORCE America ONETM System Calibration...............................................11

Entering the Calibration Menu........................................................................................... 11

Hoist/Plow............................................................................................................................ 12

FORCE America Contact Information..........................................................14

FORCE America ONETM Quick Start Manual

Hardware

The SSC5100ex is a self-contained spreader system. It has two rotary adjustment knobs, five

pairs of “switches” that act as pushbuttons for SSC5100ex functions, and an interlock “switch” on

the back of the controller. The functions that they control change depending on what options are

enabled. See Switch Labels on page 4. The left side of the SSC5100ex has a single USB port,

which can be used to import and export calibration files or upgrade the firmware.

Figure 1: The SSC5100ex

The remote controls provides the operator with three rotary adjustment knobs, inputs for remote

activation of blast and standby and control of hoist and plow operations using the attached

joystick.

Figure 2: Remote Controls

FORCE America ONETM Quick Start Manual

Power Up

FORCE America ONETM System Operation

The following information describes the basic features of the FORCE America ONETM system.

For details on more advanced operation of the spreader control please consult M0018

SSC5100ex Operation Manual.

Powering up the SSC5100ex

Upon applying 12V DC dashkey power to the SSC5100ex, it will display the Screen Power

Switch.

The Screen Power Switch

The Screen Power Switch is a safety feature of the SSC5100ex, it will prevent the system from

running spreader related outputs until the Continue button is pressed. When the Continue button

is pressed, it will display the Operation Screen.

Figure 3: Screen Power Switch

FORCE America ONETM Quick Start Manual

The Operation Screen

The Operation Screen is the main screen of the SSC5100ex, and provides controls for all of the

system functions as well as access to the menus.

The operation screen is divided into three distinct parts:

Figure 4: SSC5100ex Operation Screen

FORCE America ONETM Quick Start Manual

Switch Labels

The 5 Switch Labels always run across the very top of the screen. Each label corresponds to the

switch directly above it. Active switch functions are indicated with a green color. If a switch is

currently not used the label is left blank. The switch label will appear red if the operator selected

the Disable option on the stuck switch error condition at startup. When in this state the affected

function will not be able to be activated.

Figure 5: Switch Labels

Switch

Function

Availability Requires

Momentarily activates the Hoist, running it at

max duty cycle until the switch or interlock is

released.

Pressing both the top switch and the interlock

(integrated into the back of the controller) at

the same time will move the hoist up.

Pressing both the bottom switch and the

interlock will move it down.

The Hoist & Plow option in

calibration must be set to

Hoist or Hoist & Plow.

Momentarily activates the Plow, running it at

max duty cycle until the switch is released.

The interlock switch is not required to run

these functions.

Pressing the top switch will move the plow up

and the bottom switch will move it down.

The Hoist & Plow option in

calibration must be set to

Plow or Hoist & Plow.

Momentarily activates the Plow, running it at

max duty cycle until the switch is released.

The interlock switch is not required to run

these functions.

Pressing the top switch will move the plow left

and the bottom switch will move it right.

The Hoist & Plow option in

calibration must be set to

Plow or Hoist & Plow.

Activates or deactivates the prewet output.

Pressing the top switch will turn on Prewet

and the bottom switch will turn it off.

See page 7.

Prewet must be enabled in

Calibration.

FORCE America ONETM Quick Start Manual

Header Bar

Figure 6: Header Bar

The Header Bar always runs across the top of the screen just below the switch labels. It contains

a series of system status messages and the PreCiseTM MRM status icon (if Event Logging is set

to PreCise).

System Status Messages will be displayed in the center of the Header Bar. If two or more system

status messages are active, the messages will alternate between each other at a rate of one

message every two seconds. In Figure 6 above, a Body Up condition has occurred, showing the

Body Up system status message in the header bar.

For more information on error conditions, see

M0018 SSC5100ex Operation Manual.

FORCE America ONETM Quick Start Manual

Main Window

Figure 7: Main Window

The Main Window displays important information about the materials the system is spreading.

The blue spinner row contains information about your spinners set rate. The spinner row will only

appear when applying granular materials and adjusted using the blue knob.

The green row contains information about your primary material, and its set rate. This row is

always visible and adjusted using the green knob.

The white prewet row contains information about your prewet material and its set rate. The

prewet row will only appear when applying granular materials and Prewet is enabled in

Calibration. It is white when Prewet is activated and gray when Prewet is not activated.

Inhaltsverzeichnis

Andere Force Steuereinheit Handbücher

Force

Force CNC BTN Series Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung