Page 6 of 13
figure until the exact time shows.
Manual operation setting
Press the button to remove the flashing of “AUTO”.
If“AUTO”is flashing (automatic or semi automatic program has been set),press button to remove“AUTO”and
then the manual operation process is on.
Automatic setting (set the time of full automatic starting and ending)
1.Press button, set roast time;
2.Press button, set roast finish time;
3.Set temperatures and roast modes by turning the thermostat knob and selector knob.
After the above setting, “AUTO”will be glittering, which means the roast process of the oven is set.
For example: if roast time takes 45 minutes and expect it will end at 14:00.
Press, the roast time is to be 45 minutes;
Press, the roast is set to end at 14:00.
After the above setting, the screen shows the real time(hour、minute)and flashing“AUTO”,it means the set roast
process is memorized automatically.
When the clock turns to be 13:15(or between 13:14-13:15), the oven will start automatically.
In the roast time, and“AUTO”will be always flashing.
When the clock turns to be 14, the roast has been finished automatically. The alarm will ring and“AUTO” will flash,
press the button and the ringing will stop.
Semi-automatic setting (set the time of automatic starting and ending)
A. Set the time limit of roast (10 hours maximum):
Press the button to set the time of roast;
The oven starts immediately, and“AUTO”will flash. After the roast is finished, the roast operation process
will be shut automatically. Then“AUTO”flashes, the alarm rings. The ringing will stop after the button is
pressed.
B. Set the time of ending (23 hours 59 minutes maximum):
Press the button to set the time of ending;
The oven starts immediately, and “AUTO” will flash. When the set time of ending is reached, the roast
process will shut automatically. Then“AUTO”flashes, the alarm rings. The ringing will stop after the button is
Pressed.
When the related button is pressed, the set roast process will be displayed. Whenever the button is pressed,
and set backward the time to “0”,the set roast process will be cancelled. When button is pressed again, the
oven will revert to the manual operation process.
Timer
23 hours 59 minutes can be set as maximum.
To set the time, press the button, and then + or - button, until the required time is shown on the screen. After
the setting, the correct time (hour, minute) and the button will show on the screen. When the button is
pressed the time displaced will be seen. When the set time is reached, disappears and the alarm will ring
again. To stop the alarm, press the button.
Notice: After pressing the related button, setting is supposed to be done in 5 seconds. In case of blackout, the
set process as well as the real time (hour, minute) will disappear. After the power is on again, three“0”and
“AUTO”shows on the screen, the oven will automatically reset.
3-keys timer procedure baking mode (only available on certain models)
Adjust the clock after switch on:
Once it connected with electrical power, the display will show “12:00” with the square symbol above “ ”;
Press the “+” or “-” button will increase or decrease the number until it reaches the right time; after 5 seconds it
will start automatically or you can press the function button to make it work.
Automatic setting (set the time of full automatic starting and ending)
1. Press the function button repeatedly until the square symbol above the “ ” flashes, and press “+” or “-”
button to set the time frame baking for;
2. Press the function button repeatedly until the square symbol above the “ ” flashes, and press “+” or “-”
button to set the time to switch off;
3. Adjusting the constant temperature button and choosing button to set temperature and baking method.
After these setting, the symbols above the “ ” and “ ” will flash, it indicates the baking procedure of oven
has been set.
For example: if the food is required to bake for 45 minutes, and it is supposed to stop at 14:00.
