Appliance Setup
Step 3: Verify System Information
1. Connect to the FSM-3500F appliance using VGA port or Console port.
2. Login as ‘root’ user with password 'ProspectHills'.
3. Run get to check the available FortiSIEM commands.
4. Use the below commands to check the hardware information. After running each command, ensure that there are
no errors in the displayed output.
5.
Command Description
get system status Displays system name, version and serial number.
diagnose hardware info Displays system hardware information like CPUs, Memory
and RAID information.
diagnose interface detail port0 Displays interface status.
Step 4: Configure Network
1. On the hardware console, selectSet Timezoneand then pressEnter.
2. Select yourLocation, and then pressEnter.
3. Select yourCountry, and then pressEnter.
4. Select yourTimezone, and then pressEnter.
5. Review your Timezone information, select1, and then pressEnter.
6. When theConfigurationscreen reloads, selectLogin, and then pressEnter.
7. Enter the default login credentials:
Login root
Password ProspectHills
8. Run thevami_config_netscript to configure the network.
/opt/vmware/share/vami/vami_config_net
9. When prompted, enter the information for these network components to configure the Static IP address:IP
Address,Netmask,Gateway,DNS Server(s).
Note: The authenticated proxy server is not supported in this version of FortiSIEM.
10. PressYto accept the network configuration settings.
11. Enter theHost name,and then pressEnter.
Once the configuration is complete, the system reboots automatically.
FortiSIEM 5.4.0 3500F Hardware Configuration Guide 6
Fortinet Technologies Inc.
