Fortis 5000RT Series Bedienungsanleitung

5000RT AUTO AND MANUAL

TELLER

REMOTE TELLER SYSTEM

INSTALLATION MANUAL

SEPT 2020

5000RT INSTALLATION MANUAL

INDEX

PAGE

PRODUCT DESCRIPTION..........................................................................3

CUSTOMER SPECIFICATIONS..................................................................4

CUSTOMER ISLAND DETAIL.....................................................................5

CUSTOMER OPERATIONAL DESCRIPTION.............................................6

5000RT CUSTOMER FRONT REMOVAL...................................................7

TYPICAL TUBING INSTALLATION..............................................................8

TELLER BEND TUBING CHECK VALVE INSTALLATION.............................9

5000RT AUTO TELLER SPECIFICATIONS.................................................10

AUTO TELLER OPERATION DESCRIPTION..............................................11

AUTO TELLER WALL MOUNT INSTALLATION.........................................12

AUTO TELLER SYSTEM SPECIFICATIONS................................................13

MANUAL TELLER SPECIFICATIONS........................................................14

MANUAL TELLER OPERATION DESCRIPTIONS......................................15

MANUAL TELLER WALL MOUNT INSTALLATION....................................16

MANUAL TELLER SYSTEM SPECIFICATIONS...........................................17

MANUAL TELLER COUNTER CLEAR VIEW INSTALLATION.....................18

FIELD WIRING CONNECTION LOCATIONS...........................................19

5000RT CONTROL COMPONENTS........................................................20

FIELD WIRING.........................................................................................21

5000RT-A AND 5000DS TIMER ADJUSTMENTS......................................22

5000RT-M AND 6000RT TIMER ADJUSTMENTS......................................24

5000RT-A START UP PROCEDURE..........................................................26

5000RT-M START UP PROCEDURE.........................................................27

5000RT CUSTOMER SAFETY SWITCH ADJUSTMENTS............................28

5000RT AUTO TELLER SAFETY SWITCH ADJUSTMENTS..........................29

5000RT HEATER INSTALLATIONS............................................................30

5000RT CAMERA INSTALLATION...........................................................31

5000RT MONITOR INSTALLATION..........................................................32

5000RT CUSTOMER AUDIO CONNECTIONS.........................................33

5000RT PRODUCT DESCRIPTION

5000RT-A

THIS PRODUCT CODE INCLUDES A 5000RT CUSTOMER STATION

WITH A STANDARD BLOWER PACKAGE (2 BLOWERS) AND

AUTOMATIC TELLER STATION. IT IS A PUSH / PULL STYLE SYSTEM

THAT IS ONLY AVAILABLE IN A 4 1/2" CONFIGURATION.

THE CONTROLS ARE LOCATED IN THE UPPER PORTION OF

THE TELLER UNIT. THE CUSTOMER UNIT REQUIRES A 120 VOLT

20 AMP DEDICATED CIRCUIT. THE TELLER UNIT REQUIRES A

120 VOLT 15 AMP CIRCUIT. (THE CUSTOMER AND TELLER

CAN BE ON THE SAME 20 AMP DEDICATED CIRCUIT)

5000RT-A-Q

THIS PRODUCT CODE INCLUDES A 5000RT CUSTOMER STATION

WITH A QUAD BLOWER PACKAGE (4 BLOWERS) AND

AUTOMATIC TELLER STATION. IT IS A PUSH / PULL STYLE SYSTEM

THAT IS ONLY AVAILABLE IN A 4 1/2" CONFIGURATION.

THE CONTROLS ARE LOCATED IN THE UPPER PORTION OF

THE TELLER UNIT. THE CUSTOMER UNIT REQUIRES A 120 VOLT

30 AMP DEDICATED CIRCUIT. THE TELLER UNIT REQUIRES A

120 VOLT 15 AMP CIRCUIT.

5000RT-M

THIS PRODUCT CODE INCLUDES A 5000RT CUSTOMER STATION

WITH A STANDARD BLOWER PACKAGE (2 BLOWERS) AND

MANUAL TELLER STATION. IT IS A PUSH / PULL STYLE SYSTEM

THAT IS ONLY AVAILABLE IN A 4 1/2" CONFIGURATION.

THE CONTROLS ARE LOCATED IN THE UPPER PORTION OF

THE TELLER UNIT. THE CUSTOMER UNIT REQUIRES A 120 VOLT

20 AMP DEDICATED CIRCUIT.

THE TELLER UNIT DOES NOT

REQUIRE POWER

5000RT-M-Q

THIS PRODUCT CODE INCLUDES A 5000RT CUSTOMER STATION

WITH A STANDARD BLOWER PACKAGE (4 BLOWERS) AND

MANUAL TELLER STATION. IT IS A PUSH / PULL STYLE SYSTEM

THAT IS ONLY AVAILABLE IN A 4 1/2" CONFIGURATION.

THE CONTROLS ARE LOCATED IN THE UPPER PORTION OF

THE TELLER UNIT. THE CUSTOMER UNIT REQUIRES A 120 VOLT

30 AMP DEDICATED CIRCUIT.

THE TELLER UNIT DOES NOT

REQUIRE POWER

P-3

14 1

12 1

13 3

52 11

16 5

14 3

16 1

CUSTOMER UNI

DIMENSIONAL SPECIFICATIONS

ELECTRICAL SPECIFICATIONS

120 VOLT 20 AMP CIRCUIT REQUIRES A L5-20R RECEPTACLE (STANDARD BLOWER)

120 VOLT 30 AMP CIRCUIT REQUIRES A L5-30R RECEPTACLE (QUAD BLOWER)

CONTROL CABLE SPECIFICATIONS

8 CONDUCTOR 20 GA. CABLE REQUIRED.

FOR LENGTHS OVER 200FT AN 18 GA. IS REQUIRED

AUDIO COMPONENT SPECIFICATIONS

Speaker 8 ohm

Microphone 2K impedance condenser type

P-4

30"

RECOMMENDED

7 15

17 7

13 5

17 7

4 3

10 11

ANCHOR HOLES

5/8" DIA (4) PLCS.

CONDUITS ARE TO BE

LOCATED WITHIN

THIS AREA

CARRIER TUBE

CENTER

TRAFFIC

USING THESE ANCHORING LOCATIONS WITH PLACE THE UNIT

5" FROM THE FRONT OF ISLAND

5000RT CUSTOMER ISLAND DETAIL

P-5

DETAIL C

CUSTOMER SEND BUTTON.

CLOSES OUTER DOOR AND

SENDS CARRIER TO TELLER

STATION.

WHEN AUTO DOOR CLOSED

FEATURE IS ACTIVE PRESSING

THIS BUTTON WILL OPEN THE

OPEN THE DOOR WHEN

THE CARRIER IS PRESENT AND

THE DOOR IS CLOSED

CALL BUTTON RINGS

THE AUDIO CHIME

WHEN PRESSED.

NOTE THE AUDIO

AUTHORITY SYSTEM

DOES NOT ALLOW

THE CHIME TO CONSTANTLY

RING IF SOMEONE HOLDS

THE BUTTON IN. THERE NEEDS

TO BE A 5 SECOND DELAY

BETWEEN BUTTON PRESSES

FOR THE CHIME TO RING

A SECOND TIME

5000RT CUSTOMER OPERATIONAL

DESCRIPTION

THERE IS A SAFETY CIRCUIT THAT WILL

CAUSE THE DOOR TO REOPEN IF THERE

IS AN OBSTRUCTION IN THE WAY OF THE

DOOR WHEN IT CLOSES. ONCE THE OBSTRUCTION

IS CLEARED YOU MUST PRESS THE CUSTOMER

SEND BUTTON A SECOND TIME TO RE START THE

SEND SEQUENCE

P-6

TO REMOVE SERVICE PANEL.

LIFT PANEL APPROX. 1/2" THEN

PULL BOTTOM OF PANEL OUT

AWAY FROM UNIT AND SLIDE

DOWN.

TO REMOVE FRONT PANEL. LOOSEN

WING BOLTS (CAPTIVE FASTENERS)

THESE ARE LOCATED ON THE INSIDE

OF THE CABINET. DIRECTLY BEHIND

THE UPPER LEFT AND RIGHT HAND

CORNERS OF THE FRONT PANEL.

ONCE THESE ARE LOOSENED. PULL

THE TOP OF THE FRONT PANEL

TOWARD YOU AND LIFT OFF OF

BASE. BE CAREFUL THERE IS A WIRING

HARNESS ATTACHED TO THE BACK

SIDE OF THE SWITCHES.

WING BOLTS BEHIND

FRAME

5000RT CUSTOMER SERVICE

PANEL AND FRONT REMOVAL

P-7

CLEAR VIEW

ADAPTER

RUBBER

SEALING RING

SLIP COUPLING

CLEAR VIEW

MAKE SURE

THAT THE TOP

AND BOTTOM

OF EACH

ADAPTER HAS A

BEAD OF SILICONE

APPLIED IN ORDER

TO SEAL ADAPTERS.

5000RT CUSTOMER AND TELLER

TUBING CONNECTIONS

TELLER TUBE CONNECTION

THE TELLER TUBE CONNECTION FOR THE AUTOMATIC AND

THE MANUAL TELLER UNITS ARE THE SAME. IF YOU ARE

USING STEEL TUBE THEN YOU WILL BE USING THE CLAMP

SLEEVE. IF IT IS PVC PIPE THEN YOU WILL BE USING THE PLASTIC

ADAPTER. BOTH ARE SUPPLIED WITH THE SYSTEM.

NOTE APPLY A BEAD OF SILICONE TO THE TOP AND BOTTOM

OF THE TUBING ADAPTER WHEN USED.

P-8

VENTED BEND

LOCATED ABOVE

TELLER UNIT

FLEX HOSE

HOSE CLAMPS

CHECK VALVE PORT

CHECK VALVE

ASSEMBLY

FS55-0150

5000RT CHECK VALVE ASSEMBLY

WHEN INSTALLING CHECK VALE ALWAYS MOUNT SO THAT THE VALVE

FLAP IS HANGING DOWN OR IS ON TOP.

SEE ILLUSTRATIONS BELOW

OK OK

NOT OK NOT OK

P-9

41 1

7 3

11 5

7 5

3 11

DIMENSIONAL SPECIFICATIONS

5000RT AUTO TELLER

ELECTRICAL SPECIFICATIONS

120 VOLT 15 AMP CIRCUIT REQUIRED. TELLER UNIT CAN BE ON SAME CIRCUIT

AS CUSTOMER UNIT

CONTROL CABLE SPECIFICATIONS

8 CONDUCTOR 20 GA. CABLE REQUIRED.

FOR LENGTHS OVER 200FT AN 18 GA. IS REQUIRED

P-10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fortis Digitale Beschilderung Handbücher

Fortis

Fortis 6000 RT Handbuch

Beliebte Digitale Beschilderung Handbücher anderer Marken

LG 72WS70MS-B Bedienungsanleitung

LG 65SM5D Bedienungsanleitung

LG 55EW5TK-A.AUS Bedienungsanleitung

KeyWest Technology

KeyWest Technology BREEZE Bedienungsanleitung

XtendLan

XtendLan XL-DSP-183C Bedienungsanleitung

LG 47VL10 Bedienungsanleitung

LG WP400 Kurzanleitung

Dynascan

Dynascan DS861LR4 Bedienungsanleitung

Classic Exhibits

Classic Exhibits SEGUE DESIGNS MOD-1363 Bedienungsanleitung

LG 22XE1J Bedienungsanleitung

protech

protech KT-7290 Bedienungsanleitung

WebDT

WebDT 515A Montageanleitung

Samsung

Samsung IWJ Series Bedienungsanleitung

LG 55EJ5D Kurzanleitung

EVERI

EVERI Enrollment Kiosk Bedienungsanleitung

LG 75XS4G Bedienungsanleitung

LG 49UH7J Bedienungsanleitung

NCR

NCR SelfServ 90 Handbuch