Fostex VF-16 Bedienungsanleitung

VF-16 QUICK START – BUS METHOD RECORDING

(USING THE XLR INPUTS)

This method is used to route the XLR INPUT(s) to different tracks.**

PRIOR TO RECORD:

Since Program 1 (PGM-1) is a record-protected demo, you must first exit PGM-1 prior to recording and

disable record protect.

1. Press the PGM SEL button

2. Using the JOG wheel, turn until display reads “NEW PGM?”

3. Press the ENTER button *Note: From here you can name your program and press

ENTER ….or…. to skip simply press EXIT.

4. Using the JOG wheel, turn until display reads “REC PROTECT”. Press ENTER. Turn JOG

for display to read “OFF”. Press ENTER. Press EXIT.

The XLR inputs are located at the top of the VF16:

XLR Input G XLR Input H

The audio levels for these XLR inputs are controlled using FADER#15 & FADER#16 (bottom row)

TO START RECORDING (Bus Method)

For the following example let’s record on Track 1 using XLR Input H.

1. Connect your audio signal to Input H

2. Press the INPUT SEL button (located underneath the display)

3. Select the CH SEL#H button above fader H (16).

Display now reads “H” with “IN” underneath it.

4. Press the SOURCE button (you may be asked: “Rec Mode Change! Sure?” Press ENTER)

5. Again, select the CH SEL#H button above fader H (16) [same as you did in step 3]

Display now reads “H” with “SRC” underneath it.

6. Press the REC TRK (bus) button

7. Select the CH SEL#2 button (above fader 2). Display now reads “RDY” underneath 2.

8. Press EXIT. Display shows METERING

9. Press the RECORD button only. It should now be blinking

10. Adjust your record level using fader H (16)

11. To monitor track 2, simply adjust the channel 2 fader

12. Press RECORD & PLAY to start recording

TO LISTEN TO YOUR RECORDING

It is NOT necessary to disarm track 1 (stop it from blinking) before listening to it upon playback.

1. Press REWIND to return to the beginning. You may also press STOP & REWIND

simultaneously to return to the beginning of your program more quickly.

2. Press PLAY. To adjust track 1’s level, simply adjust the Channel 1 FADER

* Be sure the MASTER FADER is up and turned ON.

TO DISARM A RECORD ENABLED TRACK (stop it from blinking)

1. Press REC TRK (direct)

2. Press the CH SEL #1 button (above FADER#1).

a. CH SEL #1 button is no longer blinking red

b. Press EXIT

**Actually any input 1-8 can be used, but most likely you will want to use the XLR inputs for microphones.

Andere Handbücher für VF-16

7

Inhaltsverzeichnis

Andere Fostex Aufnahmegeräte Handbücher

Fostex

Fostex D-10 Bedienungsanleitung

Fostex

Fostex X-34 Bedienungsanleitung

Fostex

Fostex 4010 Bedienungsanleitung

Fostex

Fostex X-24 Bedienungsanleitung

Fostex

Fostex X-55 Bedienungsanleitung

Fostex

Fostex PD-4v2 Betriebsanleitung

Fostex

Fostex VF-08 Bedienungsanleitung

Fostex

Fostex FR-2 Technisches Handbuch

Fostex

Fostex 280 Bedienungsanleitung

Fostex

Fostex CR200 Bedienungsanleitung

Fostex

Fostex XR-7 Bedienungsanleitung

Fostex

Fostex G24S Bedienungsanleitung

Fostex

Fostex PD606 Bedienungsanleitung

Fostex

Fostex ATC-4 Bedienungsanleitung

Fostex

Fostex VR800Z Bedienungsanleitung

Fostex

Fostex UR-2 Anleitungen und Rezepte

Fostex

Fostex 80 Bedienungsanleitung

Fostex

Fostex D-90 Bedienungsanleitung

Fostex

Fostex 80 Bedienungsanleitung

Fostex

Fostex 8335 Bedienungsanleitung

Fostex

Fostex 3180 Bedienungsanleitung

Fostex

Fostex FD-8 Bedienungsanleitung

Fostex

Fostex XR-3 Bedienungsanleitung

Fostex

Fostex M20 Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch