Foxconn 650M02 Series Bedienungsanleitung

Chapter

Thank you for your buying Foxconn’s 650/651M02 series mother-

board. This series of motherboard is one of our newest products,

and offers superior performance, reliability and quality, at a

reasonable price. This motherboard adopts the advanced SiS

650GX/651+962L/962 chipsets, providing users a computer

platform with a high integration-compatibility-performance price

ratio.

This chapter includes the following information:

Main Features

Motherboard Layout

Chapter 1 Product Introduction

2650M02 and 651M02 Series User Manual

Main Features

Size

mATX form factor of 9.6” x 8.5”

Microprocessor

Supports Intel® Pentium®4 Socket 478 (Willamette/Northwood) processors

Supports Intel® Celeron®Socket 478 (Willamette/Northwood) processors

Supports FSB at 400MHz/533MHz (FSB 533MHz Supported on 651M02 only)

Supports up to 2.8GHz Socket 478 Northwood processor

Chipset

650M02: SiS650GX (North Bridge) + 962L/962 (South Bridge)

651M02: SiS651 (North Bridge) + 962L/962 (South Bridge)

System Memory

Provides two 184-pin DDR DIMM Sockets

Supports for PC 1600/PC 2100/PC 2700 (PC 2700 supported on 651M02 only)

Supports for 64Mb/128Mb/256Mb/512Mb technology up to 2GB

USB 2.0 Ports

Supports hot plug

Six USB 2.0 ports (four rear panel ports, one onboard USB headers provid-

ing two extra ports)

Supports wake-up from S3 (optional), S1

Supports USB 2.0 Protocol, 480 Mbps transmission rate

Onboard 1394 (optional)

Support hot plug

With rate of transmission at 400Mbps

Self-configured addressing

Can connect with 2 independent 1394 units synchronously at most, such

as HDD, CD-ROM

OnboardLAN

Supports 10/100Mbit/sec Ethernet

10/100M LAN interface built-in on board

650M02 and 651M02 Series User Manual

Chapter 1 Product Introduction

OnboardIDE

Supports up to four independent drives

Supports Ultra DMA 133/100/66

Two IDE interfaces can connect with four IDE units, including hard disk and

CD-ROM/DVD-ROM etc.

Onboard I/O

One FDD interface; supports two 3.5” or 5.25” FDDs with 360K/720K/1.2M/

1.44M/2.88M format

One high-speed 16550 COM interface with 16-byte FIFO buffer

One infrared interface (optional)

Four USB ports (with 6 ports supported at most)

one 1394 port (with 2 ports supported at most) (optional)

One parallel port supporting SPP/EPP/ECP mode

All I/O ports can be enabled/disabled in the BIOS setup

OnboardAudio

AC’ 97 2.2 Specification Compliant

Supports S/PDIF output (optional)

Onboard Line-in jack, Microphone jack, Line-out jack

Supports 5.1 channels audio (optional)

Onboard Graphics

Supports integrated VGA display functions

Supports external AGP 2.0 specification; supports 4X display cards

BIOS

Licensed advanced AWARD (Phoenix) BIOS, supports flash ROM, plug-

and play ready

Supports IDE, CD-ROM, SCSI HDD and USB device boot up

Green Function

Supports ACPI (Advanced Configuration and Power Interface)

Supports five system modes—S0 (normal), S1 (power on suspend),S3

(suspend to RAM)(optional), S4 (Suspend to disk – depends on OS), and

S5 (soft-off)

Chapter 1 Product Introduction

4650M02 and 651M02 Series User Manual

Expansion Slots

Three PCI slots

One AGP slot

One CNR slot (optional)

Advanced Features

PCI 2.2 Specification Compliant

Supports Windows 98/2000/ME/XP soft-off

Supports Wake-on-LAN

650M02 and 651M02 Series User Manual

Chapter 1 Product Introduction

MotherboardLayout

Note:

The above motherboard layout is provided for reference only;

please refer to the physical motherboard.

10 98

Chapter 1 Product Introduction

6650M02 and 651M02 Series User Manual

1394 PHY (optional)

The RTL8801B is IEEE 1394a 100/200/400 Mbps 2-Port Cable Transceiver/

Arbiter (PHY) Chip. Provides two fully compliant cable ports at 100/200/400

Mbps.

ATX 12V connector

This power connector connects the 4-pin 12V plug from the ATX 12V power

supply.

AGPslot

This Accelerated Graphics Port (AGP) slot supports 1.5V AGP4X mode

graphics cards for 3D graphical applications.

CPU socket

A 478-pin surface mount, Zero Insertion Force (ZIF) Socket for the Intel®

Pentium®4 processor, with 533/400MHz system bus that allows 4.2GB/s

and 3.2GB/s data transfer rates, respectively.

North Bridge controller

The SiS650GX/651 controller integrates a high performance host interface

for the Intel®Pentium®4 processor, a memory controller and SiS MuTIOL te-

chnology.

DDR DIMM sockets

These two 184-pin DIMM sockets support up to 2GB system memory

using unbuffered non-ECC PC2700 (651M02 series only)/PC2100/PC1600

DDR DIMMs.

ATX power connector

This 20-pin connector connects to an ATX power supply. The power supply

must have at least 1A on the +5V standby lead (+5VSB).

Super I/O controller

The Pin Count (LPC) interface provides the commonly used Supper I/O

functionality. The chipset supports a high-performance floppy disk controller

for a 360K/720K/1.44M/2.88M floppy disk drive, a multi-mode parallel port,

one serial port, the mouse and keyboard interface and a Flash ROM interface.

650M02 and 651M02 Series User Manual

Chapter 1 Product Introduction

Floppy disk connector

This connector accommodates the provided ribbon cable for the floppy disk

drive. One side of the connector is slotted to prevent incorrect insertion of

the floppy disk cable.

IDE connectors

These dual-Channel bus master IDE connectors support Ultra DMA 133/

100/66, PIO Modes 3 & 4 IDE devices. Both the primary (blue) and secondary

(white) connectors are slotted to prevent incorrect insertion of the IDE ribbon

cable.

Flash Rom

This 2Mb firmware contains the programmable BIOS program.

South Bridge controller

Referred to as the SiS962/SiS962L MuTIOL Media I/O, this controller

integrates the audio controller with AC’97 interface, Ethernet MAC, Dual

Universal Serial Bus Host controller, IDE Master/Slave controllers, and the

MuTIOL Connect to PCI Bridge.

PCI Slots

These three 32-bit PCI 2.2 expansion slots support bus master PCI cards

like SCSI or LAN cards with 133MB/s maximum throughput.

CNR Slot (optional)

This slot is specifically designed for the Communication and Networking

Riser (CNR) card. The CNR supports V.90 analog modem, CNR audio

card, etc.

LANPHY

The SiS 962L/962 integrated 10/100Mbps Fast Ethernet with Realtek

external PHY supports your local area networking needs.

6-Channel Audio CODEC (optional)

The ALC655 is an AC’97 CODEC that allows 6-Channel audio playback. The

audio CODEC provides six DAC channel for 5.1 surround sound, S/PDIF

output and Line-in stereo inputs, integrated headphone amplifier, greater

than 90dB dynamic range with the jack sense and jack enumeration feature.

Chapter 2 Installation Instructions

8650M02 and 651M02 Series User Manual

This chapter introduces the hardware installation process,

including the installation of the CPU, memory, power supply,

slots, rear panel and pin headers, and the mounting of

jumpers. Caution should be exercised during the installation

of these modules. Please refer to the motherboard layout prior to

any installation and read the contents in this chapter carefully.

This chapter includes the following information:

CPU

Memory

Power supply

Rear Panel

Connectors

Expansion Slots

Jumpers

Chapter2

Chapter 2 Installation Instructions

650M02 and 651M02 Series User Manual

Notes:

Take note of the following precautions before you install motherboard

Components or change any motherboard settings.

1. Unplug the power cord form the wall socket before touching

any component.

2. Use a grounded wrist strap or touch a safely grounded object

or to a metal object, such as the power supply case, before

handling components to avoid damaging them due to static

electricity.

3. Hold components by the edges to avoid touching the ICs on

them.

4. Whenever you uninstall any component, place it on a grounded

Antistatic pad or in the bag that came with the component.

5. Before you install or remove any component, ensure that the

ATX power supply is switched off. Failure to do so may cause

severe damage to the motherboard, peripherals, and /or

components.

Chapter 2 Installation Instructions

10 650M02 and 651M02 Series User Manual

CPU

This motherboard supports socket 478 CPU with a FSB 400/533 MHz (FSB

533MHz Supported on 651M02 only).

Installation of CPU

Follow these steps to install a CPU.

1. Unlock the socket by pressing the

lever sideways, then lift it up to a 900

angle.

2. Align the cut edge to the gap in the

base of the socket. Carefully insert

the CPU into the socket until it fits in

place.

3. When the CPU is in place, press it

firmly on the socket while you push

down the socket lever to secure the

CPU. The lever clicks on the side

tab to indicate that it is locked.

Cut edge

90°

Gap in the base

Push down the socket

lever to secure the CPU.

Attention:

The CPU pins must be properly aligned with the slots in the

socket, otherwise the CPU may be damaged.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Foxconn Hauptplatine Handbücher

Foxconn

Foxconn 865M01 series Bedienungsanleitung

Foxconn

Foxconn P4M800P7MB Bedienungsanleitung

Foxconn

Foxconn G41M Series Bedienungsanleitung

Foxconn

Foxconn R10-A1 Bedienungsanleitung

Foxconn

Foxconn 720A Series Bedienungsanleitung

Foxconn

Foxconn Q9657MC Bedienungsanleitung

Foxconn

Foxconn A6VMX Series Bedienungsanleitung

Foxconn

Foxconn G31 MX series Bedienungsanleitung

Foxconn

Foxconn D42S 3.0 Bedienungsanleitung

Foxconn

Foxconn P43AL Series Bedienungsanleitung

Foxconn

Foxconn A55A Series Bedienungsanleitung

Foxconn

Foxconn MCP61PM2MA Bedienungsanleitung

Foxconn

Foxconn A76ML Series Bedienungsanleitung

Foxconn

Foxconn IGPSK7MA series Bedienungsanleitung

Foxconn

Foxconn A78AX-K Bedienungsanleitung

Foxconn

Foxconn 45CS Bedienungsanleitung

Foxconn

Foxconn G45M Series Bedienungsanleitung

Foxconn

Foxconn K7S741GXMG-6L Bedienungsanleitung

Foxconn

Foxconn 761GXK8MC Bedienungsanleitung

Foxconn

Foxconn Z68A-S Series Bedienungsanleitung

Foxconn

Foxconn A88GMX Series Bedienungsanleitung

Foxconn

Foxconn 400M01 Series Bedienungsanleitung

Foxconn

Foxconn H61AP Series Bedienungsanleitung

Foxconn

Foxconn 865A01 series Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung