Foxun HDBaseT SX-EX53 Bedienungsanleitung

HDBaseTTM Ultra Slim Extender Kit

HDR, 4K@60Hz 4:4:4, up to 40M

Operating Instruction

Thank you for purchasing this product. For optimum performance and safety, please

read these instructions carefully before connecting, operating or adjusting this

product. Please keep this manual for future reference.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate this

equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this equipment:

Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

Never spill liquid of any kind on or into this product.

Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

Do not attach the power supply cabling to building surfaces.

Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

Operating Instruction

CONTENTS

1.INTRODUCTION...............................................................................4

2.APPLICATIONS.................................................................................4

3. PACKAGE CONTENTS...................................................................4

4. SYSTEM REQUIREMENTS...........................................................4

5. FEATURES........................................................................................5

6. SPECIFICATIONS...........................................................................5

7. OPERATION CONTROLS AND FUNCTIONS...........................6

7.1 Transmitter Front and Rear...........................................................6

7.2 Receiver Front and Rear Panels....................................................7

8. CONNECTION DIAGRAM............................................................8

9. MAINTENANCE..............................................................................9

10. PRODUCT SERVICE.....................................................................9

11. WARRANTY.....................................................................................9

Operating Instruction

1. INTRODUCTION

This Model allows HDMI signals to be transmitted over a Single CAT5e/6 cable.

This solution has the added features of RS232 and 2-way IR control functionality

over the same CAT5e/6 cable. It can extend 4K@60Hz HDR 10 over a HDBaseT

link and upto 40M ! The slimmest HDBaseT design, making it perfect to mount

behind ultra thin TVs.

2. APPLICATIONS

Household entertainment sharing and control

Lecture room display and control

Showroom display and control

Meeting room presentation and control

Classroom display and control

3. PACKAGE CONTENTS

1Main unit

2Operating instructions

324V1A DC power supply

41xIR TX unit

51xIR RX unit

62 Phoenix plugs for RS232 cable termination

4. SYSTEM REQUIREMENTS

Input HDMI source equipment such as DVD/Blu-ray player and HDMI

equipped output display (TV or monitor).

Operating Instruction

5. Features

Bandwidth up to 18Gbps, resolution up to 4k @60hz YUV 4:4:4

Transmit up to 70m under 1080p, 40m under 4k

Support HDR10, 3D

With 1x looping HDMI out at Transmitter and 2 x HDMI out at Receiver

Bi-directional wide band IR and RS232 Pass through

Dual POC (Receiver powered by transmitter or transmitter powered by

Receiver)

HDCP2.2/ HDCP1.4 Compliant

6. Specifications

Operating Temperature Range -10 to +55°C (14 to +131 °F)

Operating Humidity Range 5 to 90 % RH (no condensation)

Input Video Signal 0.5-1.0 volts p-p

Input DDC Signal 5 volts p-p (TTL)

Video Format Supported DTV/HDTV;

4K/1080P/1080i/720P(50HZ)/576P/480P/576i/480i

Output Video HDMI 2.0+HDCP1.4/2.2

Output Audio Support DTS-HD, Dolby-HD

Maximum Transmission Distance 70 meters for 1080P, 40 meters for 4K

Power Supply 24V1A

Poc Power from TX to RX over Cat5/6 cable

Power Consumption 12Watts

Dimensions 139.4mmH×66.8mmW×20mmD

Mass (Main unit) 0.7Kg / 1.54lb (Pairs)

Operating Instruction

7. OPERATION CONTROLS AND FUNCTIONS

7.1 Transmitter Front and Rear

1HDMI In: Connect to HDMI source equipment such as DVD or Blu-ray player

2HDMI Out: Connect to a HDMI equipped TV/Monitor for display of the

HDMI input source signal

3IR In: Connect to the supplied IR blaster cable for IR signal transmission.

Place the IR blaster in direct line-of-sight of the equipment to be controlled.

4IR Out: Connect to the supplied IR blaster cable for IR signal transmission.

Place the IR blaster in direct line of sight of the equipment to be controlled

5DC/12-24V: Plug the 24V DC power supply into the unit and connect the

adaptor to an AC outlet

6Update: USB port to update the firmware

7CAT5e/6 Out: Connect to the receiver unit with a single CAT5e/6 cable for

transmission of all data signals

8EDID: Auto: default 4K@60Hz

Local: copy EDID from display of transmitter

Remote: copy EDID from display of receiver

9RS232 in: Connect to a PC or laptop with phoenix terminal for the

transmission of RS232 commands

Operating Instruction

7.2 Receiver Front and Rear Panels

1HDMI Out1: Connect to a HDMI equipped TV/Monitor for display of the

HDMI input source signal

2HDMI out2: Connect to a HDMI equipped TV/Monitor for display of the

HDMI input source signal

3IR Out: Connect to the supplied IR blaster cable for IR signal transmission.

Place the IR blaster in direct line of sight of the equipment to be controlled

4IR In: Connect to the supplied IR blaster cable for IR signal transmission.

Place the IR blaster in direct line-of-sight of the equipment to be controlled.

5DC/12-24V: Plug the 24V DC power supply into the unit and connect the

adaptor to an AC outlet

6Update: USB port to update the firmware

7CAT5e/6 In : Connect to the transmitter unit with a single CAT5e/6 cable for

transmission of all data signals

8RS232 Out: Connect to the device that is to be controlled via phoenix terminal

by RS-232 commands

Operating Instruction

8. CONNECTION DIAGRAM

Inhaltsverzeichnis

Andere Foxun Extender Handbücher

Foxun

Foxun SX-GES24 Bedienungsanleitung

Foxun

Foxun SX-WHD02 Bedienungsanleitung

Foxun

Foxun SX-EW11 Bedienungsanleitung

Foxun

Foxun SX-EX33 Bedienungsanleitung

Foxun

Foxun SX-EX57 Bedienungsanleitung

Foxun

Foxun SX-EX70 Bedienungsanleitung

Foxun

Foxun SX-EH100 Bedienungsanleitung

Foxun

Foxun SX-EX11 Bedienungsanleitung

Foxun

Foxun SX-EP37 Bedienungsanleitung

Foxun

Foxun SX-EX37 Bedienungsanleitung

Foxun

Foxun SX-EX36 Bedienungsanleitung

Foxun

Foxun SX-EX13 Bedienungsanleitung

Foxun

Foxun SX-WHD01 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung

ASUSTOR

ASUSTOR AS5004U Bedienungsanleitung