Fraco SEP-5000 Bedienungsanleitung

 
Transport platform SEP Serie 
 
SEP user’s manual Page 2 of 89 Doc no. RD-7243-MA-001-02 
 
 
Table of content 
Foreword.............................................................................................................................................................5
1. Revision table................................................................................................................................................. 5 
2. Documents and applicable standards............................................................................................................. 5 
3. Manual Content.............................................................................................................................................. 6 
3.1. What does this manual contain?........................................................................................................... 6 
3.2. Who must consult this manual? ............................................................................................................ 6 
3.3. Manual exclusions................................................................................................................................ 6 
3.4. To consider for resale........................................................................................................................... 6 
Safety..................................................................................................................................................................7
1. Warnings and symbols................................................................................................................................... 7 
2. Residual risks................................................................................................................................................. 9 
3. Operational and transport security................................................................................................................ 10 
4. Safety instructions........................................................................................................................................ 11 
4.1. Safety during assembly and disassembly............................................................................................ 11 
4.2. Safety during maintenance ................................................................................................................. 11 
4.3. Promoting use of the user’s manual.................................................................................................... 11 
Intended use and fields of application............................................................................................................12 
1. Improper use................................................................................................................................................ 12 
2. Controls and commands............................................................................................................................... 13 
3. Requirements regarding assembly/disassembly personnel........................................................................... 13 
4. Requirements regarding operating personnel............................................................................................... 13 
Technical data..................................................................................................................................................14 
1. General data ................................................................................................................................................ 14 
2. Model specific data....................................................................................................................................... 15 
3. Available options.......................................................................................................................................... 15 
4. Technical configurations............................................................................................................................... 16 
4.1. Overview, mono-mast –single unit ..................................................................................................... 16 
4.2. Overview, double-mast –twin units..................................................................................................... 17 
5. General dimensions...................................................................................................................................... 18 
6. Platfom components..................................................................................................................................... 21 
7. Configurations.............................................................................................................................................. 22 
8. Regulatory attachment points....................................................................................................................... 23 
9. Accessories.................................................................................................................................................. 24 
9.1. Protection roof and access trap (optional)........................................................................................... 24 
9.2. Auto-lubrication device (optional)........................................................................................................ 27 
9.3. Ground protection mesh (optional)...................................................................................................... 28 
9.4. Self-erecting device (optional)............................................................................................................. 29 
9.5. Hoisting chains (optional).................................................................................................................... 30 
9.6. Heating system (optional) ................................................................................................................... 30 
9.7. Overload detector (optional)................................................................................................................ 30 
9.8. Level communication system (optional) .............................................................................................. 30 
10. Data plates and stickers ............................................................................................................................... 31 
10.1. Data plate and serial number.............................................................................................................. 31 
10.2. Stickers............................................................................................................................................... 32 

 
Transport platform SEP Serie 
 
SEP user’s manual Page 3 of 89 Doc no. RD-7243-MA-001-02 
 
11. Documentation compartment........................................................................................................................ 33 
Installation data................................................................................................................................................34 
1. Types of bases............................................................................................................................................. 34 
1.1. Base with adjustable jack legs: ........................................................................................................... 34 
2. Foundation requirements.............................................................................................................................. 34 
3. Local loads................................................................................................................................................... 35 
3.1. Local loads for mast section 26" x 26" (0,65 m x 0,65 m).................................................................... 35 
4. Anchoring and distribution............................................................................................................................ 36 
5. Electrical connection (on site)....................................................................................................................... 37 
Transport..........................................................................................................................................................38 
1. Inspection upon delivery............................................................................................................................... 38 
2. Loading and unloading of the machine......................................................................................................... 38 
2.1. Lifting with a forklift............................................................................................................................. 38 
2.2. Lifting with a crane.............................................................................................................................. 39 
Operation..........................................................................................................................................................40 
1. Notes and recommendations........................................................................................................................ 40 
2. Operation safety instructions ........................................................................................................................ 41 
3. Rules for guests ........................................................................................................................................... 41 
4. Regulations for ground level workers............................................................................................................ 41 
5. Platform loading and unloading .................................................................................................................... 42 
6. Safety inspection.......................................................................................................................................... 42 
7. Controls........................................................................................................................................................ 43 
7.1. Main control panel (CC1).................................................................................................................... 43 
7.2. Operator control box (CC2)................................................................................................................. 44 
7.3. Ground box power supply (GC1)......................................................................................................... 45 
7.4. Drop test remote control ..................................................................................................................... 46 
8. Operation and using the machine................................................................................................................. 47 
8.1. Before operating the plateform............................................................................................................ 47 
8.2. Ascend ............................................................................................................................................... 47 
8.3. Descend............................................................................................................................................. 48 
8.4. Interruption and/or end of work ........................................................................................................... 49 
9. Opening the doors........................................................................................................................................ 50 
9.1. Opening the ground protection mesh door.......................................................................................... 50 
9.2. Opening the tailgate............................................................................................................................ 51 
9.3. Landing door opening......................................................................................................................... 56 
10. Limit switches (level detector)....................................................................................................................... 57 
11. Overload detector (optional)......................................................................................................................... 58 
12. Emergency stop button................................................................................................................................. 58 
13. Emergency descent procedure..................................................................................................................... 59 
14. Centrifugal emergency brake activation........................................................................................................ 60 
15. Using the derivation adaptor......................................................................................................................... 61 
Faults; causes and corrections.......................................................................................................................62 
1. Cabin was raised too high ............................................................................................................................ 63 
2. Cabin was lowered too low........................................................................................................................... 63 
3. The overload warning device was triggered (optional equipment only). ........................................................ 63 
4. The centrifugal emergency brake was triggered ........................................................................................... 64 

 
Transport platform SEP Serie 
 
SEP user’s manual Page 4 of 89 Doc no. RD-7243-MA-001-02 
 
5. Status light indicators repair guide................................................................................................................ 64 
5.1. Green light indicator (sécurité cabine/cabin safety)............................................................................. 65 
5.2. Green light indicator (Sécurité au sol/ground safety)........................................................................... 65 
5.3. Green light indicator (Porte cabine/cabin door) ................................................................................... 66 
Periodic maintenance ......................................................................................................................................67 
1. Daily maintenance........................................................................................................................................ 68 
2. Weekly maintenance.................................................................................................................................... 69 
3. Monthly maintenance ................................................................................................................................... 70 
4. Quarterly maintenance................................................................................................................................. 70 
5. Annual maintenance..................................................................................................................................... 71 
6. Three (3) years maintenance........................................................................................................................ 71 
7. Periodic Lubrification.................................................................................................................................... 72 
8. Rack manual lubrication............................................................................................................................... 73 
9. Daily inspection grid ..................................................................................................................................... 74 
Procedures and inspection..............................................................................................................................75 
1. Drop test procedure...................................................................................................................................... 75 
1.1. Emergency brake reset....................................................................................................................... 77 
Spare parts.......................................................................................................................................................78 
Technical data..................................................................................................................................................79 
1. Electrical technical data................................................................................................................................ 79 
2. Platform technical sheet ............................................................................................................................... 79 
3. Mast section technical sheet......................................................................................................................... 80 
4. End mast section technical sheet ................................................................................................................. 81 
5. Adjustable ground base technical sheet ....................................................................................................... 82 
Machine disposal .............................................................................................................................................83 
Warranty and declaration of conformity.........................................................................................................83 
Appendixes.....................................................................................................................................................................84 
List of figures............................................................................................................................................................... 84 
List of tables................................................................................................................................................................ 85 
Periodic inspection forms ............................................................................................................................................ 86 
 
 

Transport platform SEP Serie

SEP user’s manual Page 5 of 89 Doc no. RD-7243-MA-001-02

1. Foreword

1.1. Revision table

Revision N°

Description

Date (yyyy-mm-dd)

First issue

2017-09-29

Revision for first installation and test

2017-11-08

Revision after first installation and test

2017-12-12

1.2. Documents and applicable standards

•CSA B354.12-17 - Design, calculations, safety requirements, and test methodology for mast

climbing transport platforms (MCTPs)

•CSA B354.13/14-17 - Safe use and best practices for mast climbing transport platforms

(MCTPs)/ Training for mast climbing transport platforms (MCTPs)

•ANSI/SIA A92.10 –2008 –American National standard for transport platforms

Other documentation:

•Installation manual (RD-7243-MA-002)

•Parts book (RD-7243-MA-003)

•Safety device reset procedure SD2 (emergency centrifugal brake)

Transport platform SEP Serie

SEP user’s manual Page 6 of 89 Doc no. RD-7243-MA-001-02

1.3. Manual Content

This manual presents all the important and necessary information to safely and economically

work with the platform. The present manual supposes that the platform is equipped with all

available options.

Read the present manual attentively, upon reception, before proceeding to installation and

servicing. Take time to observe all notes and pay particular attention to the safety instructions.

1.3.1. What does this manual contain?

The present manual contains advice, observations and instructions concerning;

•Intended use and fields of application

•Inherent and residual risks

•Safety

•Technical data

•Installation requirements

•Operations

•Faults; causes and corrections

•Maintenance

•Customer service

1.3.2. Who must consult this manual?

•Installers and operators working on the machine

•The machine’s maintenance staff (cleaning/maintenance)

1.3.3. Manual exclusions

•This manual is not an installation guide. The installation manual is a separated document

(RD-7243-MA-002) delivered with the machine.

•This manual is not a repair guide! You will not find any instructions concerning repair

work in this manual. If needed, consult the FRACO technical department.

1.3.4. To consider for resale

In case of resale of the platform, it is very important to transmit all original documentation

to the buyer; (User’s manual, Installation manual, Parts book) as well as all the inspection

sheets and log book.

Transport platform SEP Serie

SEP user’s manual Page 7 of 89 Doc no. RD-7243-MA-001-02

2. Safety

2.1. Warnings and symbols

The present manual is intended for any person proceeding to assembly, disassembly, operating

and/or maintenance of the platform.

Required training:

•An operator must have successfully completed Level 1 (Safety and user) training and hold

a valid training card, be familiar with the content of the present manual and master operation

rules/regulations for the platform;

•An installer must have successfully completed Level 2A or 2B (Installation) training and

hold a valid training card, be familiar with the content of the present manual and master

operation rules/regulations for the platform;

•Before assembly, disassembly, operation or maintenance of the platform, you must read

and perfectly understand instructions found in the present manual, as well as the installation

manual. Not conforming to these safety instructions may general material damages, severe

wounds and even death. FRACO and/or its representative can in no case be held

responsible. All local norms and regulations applicable concerning safety and prevention of

accidents, environmental protection and all other activity related to assembly, disassembly,

operation and maintenance of this type of equipment are considered a supplement to the

present manual and must imperatively be respected, for example; the use of individual

protection equipment (harness, helmet, boots, etc.).

•If the machine is installed in an area accessible to the public, access to the work zone must

be restrained with a fence of 8,20ft (2,5m) MINIMUM. The machine operator has the

responsibility to verify the stability and solidity of the fence.

•Safety is our priority! For this reason, never remove or modify a part in order to adapt the

platform to a special condition. Contact FRACO for any assistance.

•Use only parts from the official parts list.

∞REFER TO THE PARTS BOOK (RD-7243-MA-003).

•Keep this manual in proximity of the machine. The present manual is considered an

integral part of the platform and is mandatory to communicate the necessary safety

information’s to the operator and users. A copy of the present manual must always be

included in the waterproof compartment meant for that purpose on the platform.

∞SEE SECTION 4.11 DOCUMENTATION COMPARTMENT,ON PAGE 33.

•Stickers and warnings. Make sure to read and understand all the stickers, warnings and

instructions displayed on the equipment, or to get explanations from a qualified person.

∞SEE SECTION 4.10 DATA PLATES AND STICKERS,ON PAGE 31.

Transport platform SEP Serie

SEP user’s manual Page 8 of 89 Doc no. RD-7243-MA-001-02

Remember that:

•For security reasons, a minimum of two (2) people must be present at all time on each

platform during assembly, disassembly, or maintenance.

•Local regulation may require that the platform be equipped at all time with an extinguisher. Its

position shall be displayed on the platform to be easily located.

•In case of a FIRE: Remain calm and notify all persons present on the platform. If available,

use the extinguisher and follow the provided instructions. If the fire is out of control, evacuate

le platform by the closest access.

•Local regulation may require adequate protection of the platform in case of a storm. Follow

indications required by the local regulation.

•Work on the platform only if wearing tight-fitting clothing,

security boots and a helmet in accordance with local regulation in

effect. Do not wear jewelry such at necklaces and rings as it may

induce a risk of jamming and pulling.

•IMPORTANT!: Refer to SECTION 2SAFETY,ON PAGE 7, for additional safety instructions related to

the operation of the platform.

∞SEE SECTION 2SAFETY,STARTING ON PAGE 7.

If, after consulting the present manual, you have any doubts concerning the assembly,

disassembly, operation or maintenance of the platform, contact your FRACO representative.

•Consequences of violation of safety instructions; violation of safety instructions may put

staff, environment and machine in danger. Violation may lead to the cancellation of all

indemnities.

In this manual, the following symbols and annotations are used:

Symbols

Description

Danger

Major risks for physical and/or material damages for survival

and safety

Warning!

Risks of physical and/or material damages

Important!

Important points to monitor to conform with proper functioning

of the machine

Note

Additional of complementary information

Table 1 - Symbols and annotations

Transport platform SEP Serie

SEP user’s manual Page 9 of 89 Doc no. RD-7243-MA-001-02

2.2. Residual risks

Despite all taken precautions, residual risks remain such as:

•Wounds from uncoordinated tasks

•Malfunction of a control system

•Work with an electric system

•Damage to the transport equipment

•Fall of inappropriately secured objects

•Strong winds

•Entrance and exit

•Loud noises

•Dust

•Or any other work-related inherent risk, etc.

Transport platform SEP Serie

SEP user’s manual Page 10 of 89 Doc no. RD-7243-MA-001-02

2.3. Operational and transport security

When operating the machine, please respect the following safety instructions;

•Respect the equipment’s load capacity.

•Use the machine only in absence of technical defects; be conscious of security measures

and instruction of the user’s manual.

•Immediately correct defects that may affect security.

•Immediately stop the machine if there are changes relative to the security of the machine or

its operative behavior and report the problem to the management of the company or its

representatives.

•Do not modify the machine or add parts that are not included in the official parts list. This also

applies to installation and settings of security devices, for example, the limit switches.

•Do not modify, remove, replace or bypass the security devices.

•Immediately replace damaged, illegible or missing warning notices and signs as well as

security stickers.

∞SEE SECTION 4.10 DATA PLATES AND STICKERS,ON PAGE 31.

•If work is interrupted, turn offf the machine by the main switch and lock with a padlock.

•In situations representing a danger for the operating staff of the machine, turn off the machine

by pressing the EMERGENCY STOP button.

∞SEE SECTION EMERGENCY STOP BUTTON,ON PAGE 58.

•Lower and stop the machine if winds exceed: > 35 mi/h (> 55 km/h). If winds

exceeding >70 mi/h (> 117 km/h) are expected, secure unit to the ground. If in doubt,

consult effective local regulation and/or your FRACO representative.

•Always protect the machine against unauthorized access and uses!

•Place the load on the platform in a secure manner. Any material that may slide or fall must be

correctly secured

•Do not stand or work under the platform!

•Do not place objects under the platform.

•Distribute load uniformly on the platform and observe maximum load distribution.

•Store materials at a secure distance of at least 20" (50 cm) of any moving part of the

machine.

•The user most ensure that the area where the machine is installed is clean and uncluttered,

as specified in the instructions.

•Any person accompanying the operator must conform to his given instructions. More

particularly, the person must not step over the material being transported in the platform.

•Identify damages, sounds and defects externally recognizable. Immediately signal all

functioning changes or defect to the management of the company or its authorised

representatives and turn offf and secure the machine immediately.

•Important! Adequately illuminate the platform during night shifts and where light is

necessary.

•Inspect the machine before each work shift and at each periodic maintenance inspection.

(Image as reference only)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fraco Aufzug Handbücher

Fraco

Fraco SEH 4500 Gebrauchsanweisung

Beliebte Aufzug Handbücher anderer Marken

OMS

OMS Hypodrive EC 2-25 Lift Bedienungsanleitung

GSI Group

GSI Group X Series Bedienungsanleitung

ZHONGTIAN

ZHONGTIAN TDTG36/18 Bedienungsanleitung

Savaria

Savaria Vuelift Mini Bedienungsanleitung

RAM

RAM CRYSTAL Bedienungsanleitung

LGMG

LGMG A45JE Bedienungsanleitung

York

York M36 Bedienungsanleitung

Cambridge Elevating

Cambridge Elevating JOURNEY LU Bedienungsanleitung

Maxon

Maxon BMR-CS Bedienungsanleitung

Circor

Circor G3DB Series Datenblatt

Fox Valley Elevator

Fox Valley Elevator F114 Bedienungsanleitung

Fantek

Fantek T-105 Bedienungsanleitung

Skandia Elevator

Skandia Elevator SEH 50/18 Bedienungsanleitung

Cibes Lift

Cibes Lift A4000 Handbuch

Waupaca

Waupaca Paca-Ryde Bedienungsanleitung

ThyssenKrupp

ThyssenKrupp SC300 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG ZAS0 Bedienungsanleitung

Cambridge Elevating

Cambridge Elevating BES 3 Bedienungsanleitung