Franke FAID0004 Bedienungsanleitung

ZMI_001_2030019057-FAID0004_#SALL_#AQU_#V3.fm / 01.05.22

Installation and operating instructions Montaż i instrukcja obsługi

EA-Nr.: 7612982217050

Best.-Nr.: 2030019057

FAID0004

Inhaltsverzeichnis11.fm

...................................................................................... 3

Please refer to the graphics in the German Installation and

Operating Instructions.

...................................................................................... 10

Prosimy przyjąć grafikę z niemieckiej instrukcji montażu i

obsługi.

- 3 -

ZMI_001_2030019057-FAID0004_#SEN_#AQU_#V2.fm

0English

Emergency shower with pull rod

Please refer to the graphics in the German installation and operating instructions.

Table of contents

1. Abbreviations and units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

4. Important notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Description of product

5. Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

6. Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

7. Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

8. Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

9. Installation example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Assembly, function and commissioning

10. Assembly for actuation from right . . . . . . . . . . . . . . . . . . . . . . . . . 5

11. Assembly for actuation from left . . . . . . . . . . . . . . . . . . . . . . . . . . 7

12. Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Maintenance

13. Maintenance and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

14. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

15. Spare parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1. Abbreviations and units

EA-Nr. European article number

Best.-Nr. Aquarotter order number

Conversion 1 mm = 0.03937 inches

1 inch = 25.4 mm

All length specifications in the graphics are in mm.

ZMI_001_2030019057-FAID0004_#SEN_#AQU_#V2.fm

- 4 -

2. Key

Warning!

Failure to observe can result in bodily injury or even death.

Caution!

Failure to observe can result in material damage.

☞Important!

Failure to observe can cause the product to malfunction.

☞Useful information for optimum handling of the product.

3. Warranty

Liability is accepted in accordance with the General Terms and Conditions of

Business and Supply.

Use only genuine spare parts!

4. Important notes

• Installation, commissioning and maintenance must be performed only by a

qualified expert in accordance with the instructions provided, legal requirements

and recognised engineering standards.

• All technical connection regulations specified by the local water and electricity

supply companies must be observed.

• If using the extension for the coupling rod, do not use the provided drilling

template.

• We reserve the right to make changes.

5. Application

Emergency showers are prescribed first aid installations for work stations where

hazardous materials are being handled.

6. Technical specifications

Minimum flow pressure: 0.5 bar

Maximum stagnation pressure: 10 bar

Volumetric flow:

0.5 bar flow pressure: 45 l/m

1.0 bar flow pressure: 65 l/m

1.5 bar flow pressure: 80 l/m

2.0 bar flow pressure: 90 l/m

2.5 bar flow pressure: 100 l/m

3.0 bar flow pressure: 110 l/m

Assembly height: Lower edge of shower head (220 ± 10) cm

above floor as per EN 15154 Part 1

- 5 -

ZMI_001_2030019057-FAID0004_#SEN_#AQU_#V2.fm

7. Scope of delivery

8. Dimensions

A: Design with pull rod on right

B: Design with pull rod on left

C: For special designs, see the customer drawing for dimensions

9. Installation example

10. Assembly for actuation from right

☞Important!

Prior to the assembly process, flush the pipework in accordance with DIN 1988.

Mount the emergency shower in accordance with EN 15154 Part 1.

☞The manual actuator of the emergency shower can be plugged.

☞To protect the tiles, use masking tape when marking and drilling. Drill at low speed.

☞Depending on the composition of the wall, special wall plugs may have to be used

(to be provided by the customer).

☞Important!

The internal thread G ¾ for the locally provided water connection may not protrude

from the wall by more than 1 mm, and may not extend into the wall by more than

15 mm.

Pos. Pcs. Name

1 1 Shower head

2 1 Wall bracket

3 1 Ball valve

4 1 Wall plate with sealing plug

5 1 Plug-in socket

6 1 Wall support

7 1 Wall bearing linkage

8 1 Hand actuator and guide post support with plugging option

9 1 Accessories kit:

First aid sign, Mounting set

1 Installation and operating instructions

ZMI_001_2030019057-FAID0004_#SEN_#AQU_#V2.fm

- 6 -

☞For a door leaf width from 1 m, check whether the door frame obstructs the

assembly of the pull rod or wall support.

10.1

Door leaf width up to 1 m:

Place the water connection centrally above the door at a height of 2310 ± 100 mm

above the finished floor.

10.2

Screw in the plug-in socket (a) with an Allen key to form a seal.

10.3

Slide the wall plate (b) onto the plug-in socket (a) and align it.

10.4

Mark the drill holes.

10.5

Align the wall support (c) in accordance with the dimensions and mark the drill holes.

☞Alternatively, use the drilling template.

☞If using the extension for the coupling rod, do not use the provided drilling template.

☞Important!

To assemble the system for actuation on the right, use the indicated drill holes.

10.6

Drill in accordance with these markings.

10.7

Insert the wall plugs.

10.8

Screw on the wall support (c).

10.9

Slide the wall plate (b) onto the plug-in socket (a) as far as the wall and fix in place

with the grub screw (d).

10.10

Screw on the wall plate (b).

10.11

Dismantle the fork head (f) from the valve lever (e).

10.12

Screw in the closed ball valve as far as possible, creating a seal and bringing it into

position as follows:

– The valve axis must point downwards (and not to the ceiling).

– The pivot motion of the valve lever must be aligned so that it is parallel to the

floor.

10.13

Secure the ball valve (h) with the two grub screws (g).

10.14

Mount the wall bearing linkage.

j: Rubber

k: Steel

10.15

Screw the fork head (f) to the coupling rod (l).

10.16

Mount the fork head (f) with the coupling rod to the valve lever (e).

10.17

Place the guide post (m) onto the guide (o) on the manual actuator and secure with

the grub screw (n).

10.18

Place the valve lever into the "close" position.

A: Closed

B: Open

10.19

Screw the manual actuator (q) into the fork head (p) of the deflection lever and lock

with a nut.

10.20

Using the spirit level, align the manual actuator (q) so that it is vertical.

10.21

Mark drill holes for the wall support (r) 40 mm above the triangular handle.

- 7 -

ZMI_001_2030019057-FAID0004_#SEN_#AQU_#V2.fm

10.22

Drill in accordance with these markings.

10.23

Insert the wall plugs.

10.24

Screw on the wall support (r).

10.25

Mount the wall arm in a sealing manner and bring it into position.

10.26

Screw the shower head (n) onto the wall arm (m) so that it seals.

10.27

Establish the water connection.

10.28

Check the water connection for leaks.

10.29

Plug the manual actuator if need be.

11. Assembly for actuation from left

☞Important!

Prior to the assembly process, flush the pipework in accordance with DIN 1988.

Mount the emergency shower in accordance with EN 15154 Part 1.

☞The manual actuator of the emergency shower can be plugged.

☞To protect the tiles, use masking tape when marking and drilling. Drill at low speed.

☞Depending on the composition of the wall, special wall plugs may have to be used

(to be provided by the customer).

☞Important!

The internal thread G ¾ for the locally provided water connection may not protrude

from the wall by more than 1 mm, and may not extend into the wall by more than

15 mm.

☞For a door leaf width from 1 m, check whether the door frame obstructs the

assembly of the pull rod or wall support.

11.1

Door leaf width up to 1 m:

Place the water connection centrally above the door at a height of 2310 ± 100 mm

above the finished floor.

11.2

Screw in the plug-in socket (a) with an Allen key to form a seal.

11.3

Slide the wall plate (b) onto the plug-in socket (a) and align it.

11.4

Mark the drill holes.

11.5

Align the wall support (c) in accordance with the dimensions and mark the drill holes.

☞Alternatively, use the drilling template.

☞If using the extension for the coupling rod, do not use the provided drilling template.

☞Important!

To assemble the system for actuation on the right, use the indicated drill holes.

11.6

Drill in accordance with these markings.

11.7

Insert the wall plugs.

11.8

Screw on the wall support (c).

11.9

Slide the wall plate (b) onto the plug-in socket (a) as far as the wall and fix in place

with the grub screw (d).

ZMI_001_2030019057-FAID0004_#SEN_#AQU_#V2.fm

- 8 -

11.10

Screw on the wall plate (b).

11.11

Dismantle the fork head (e) from the valve lever (f).

11.12

Screw in the closed ball valve as far as possible, creating a seal and bringing it into

position as follows:

– The valve axis must point upwards (and not to the floor).

– The pivot motion of the valve lever must be aligned so that it is parallel to the

ceiling.

11.13

Secure the ball valve (h) with the two grub screws (g).

11.14

Mount the wall bearing linkage.

j: Rubber

k: Steel

11.15

Screw the fork head (e) to the coupling rod (l).

11.16

Mount the fork head (e) with the coupling rod to the valve lever (f).

11.17

Place the guide post (m) onto the guide (o) on the manual actuator and secure with

the grub screw (n).

11.18

Place the valve lever into the "close" position.

A: Closed

B: Open

11.19

Screw the manual actuator (q) into the fork head (p) of the deflection lever and lock

with a nut.

11.20

Using the spirit level, align the manual actuator (q) so that it is vertical.

11.21

Mark drill holes for the wall support (r) 40 mm above the triangular handle.

11.22

Drill in accordance with these markings.

11.23

Insert the wall plugs.

11.24

Screw on the guide.

11.25

Mount the wall arm in a sealing manner and bring it into position.

11.26

Screw the shower head (s) onto the wall arm (t) so that it seals.

11.27

Establish the water connection.

11.28

Check the water connection for leaks.

11.29

Plug the manual actuator if need be.

12. Function

12.1

Pull the manual actuator.

• The water will flow.

☞The valve is not self-closing!

12.2

Place the manual actuator back in its start position.

• The water stops flowing.

- 9 -

ZMI_001_2030019057-FAID0004_#SEN_#AQU_#V2.fm

13. Maintenance and care

Check the emergency shower once a month to make sure that it is in working order.

(Guidelines for Laboratories BGI/GUV-I 850-0)

As a measure for the prevention of microbiological contamination, it is recom-

mended that you replace the fill water in the fitting at shorter intervals by opening the

valve.

Use suitable cleaning agents which do not attack the tap in a proper manner and

rinse with water after use. High-pressure cleaners must not be used for cleaning.

14. Troubleshooting

If you cannot rectify a fault or if it is not in the list, please contact our customer

service department!

15. Spare parts

Description Order No.

Ball valve . . . . . . . . . . . . . . . . . . . . . 2030025022

Other spare parts on request; see the wall bracket for material numbers.

Fault Cause Remedy

Water does not flow – Water supply interrupted ➯Restore it

Manual actuator is

catching

– Ball valve not correctly aligned ➯Align it

– Pull rod or manual actuator bent ➯Straighten it

– Ball valve stiff ➯Replace it

Body shower is

dripping

– Ball valve defective ➯Replace it

ZMI_001_2030019057-FAID0004_#SPL_#AQU_#V2.fm

- 10 -

0Polski

Prysznic bezpieczeństwa z drążkiem pociągowym

Patrz rysunek w niemieckiej instrukcji montażu i obsługi.

0Spis treści

1. Skróty i jednostki . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2. Objaśnienie symboli . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

3. Gwarancja . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4. Ważne uwagi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Opis produktu

5. Zastosowanie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

6. Dane techniczne. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

7. Zakres dostawy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

8. Wymiary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

9. Przykład instalacji . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Montaż, działanie i uruchomienie

10. Montaż z obsługą po prawej stronie . . . . . . . . . . . . . . . . . . . . . . . 12

11. Montaż z obsługą po lewej stronie . . . . . . . . . . . . . . . . . . . . . . . . 14

12. Działanie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Konserwacja

13. Konserwacja i czyszczenie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

14. Usuwanie usterek . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

15. Części zamienne . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

1. Skróty i jednostki

EA-Nr. Europejski numer artykułu

Best.-Nr. Nr katalogowy Aquarotter

Przeliczanie jednostek 1 mm = 0,03937 cala

1 cal = 25,4 mm

Wszystkie długości na rysunkach podano w mm.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Franke Badezimmerarmatur Handbücher

Franke

Franke CMPX502N Bedienungsanleitung

Franke

Franke F5E-Therm F5ET2025 Bedienungsanleitung

Franke

Franke AQCT0050 Bedienungsanleitung

Franke

Franke RODAN RODX602 Bedienungsanleitung

Franke

Franke 7612210081965 Bedienungsanleitung

Franke

Franke AQUAJET-COMFORT SHAC0008 Bedienungsanleitung

Franke

Franke AQMX0008 Bedienungsanleitung

Franke

Franke PRTR0005 Bedienungsanleitung

Franke

Franke MIRANIT F5ST2025 Bedienungsanleitung

Franke

Franke AQUATIMER A3000 Bedienungsanleitung

Franke

Franke RODX605E Bedienungsanleitung

Franke

Franke FAID0005 Bedienungsanleitung

Franke

Franke 2152 00 23 Bedienungsanleitung

Franke

Franke AQUAJET-COMFORT SHAC0007 Bedienungsanleitung

Franke

Franke STD08 Bedienungsanleitung

Franke

Franke Protronic-S AQUA131 2000067774 Bedienungsanleitung

Franke

Franke HDTX0001 Bedienungsanleitung

Franke

Franke CAMPUS CMPX538E Bedienungsanleitung

Franke

Franke EXOS676 Bedienungsanleitung

Franke

Franke EXOS ZEXOS605 Bedienungsanleitung

Franke

Franke 7612210009501 Bedienungsanleitung

Franke

Franke AQRE431 Bedienungsanleitung

Franke

Franke AQUA107 Bedienungsanleitung

Franke

Franke AQUAFIT Bedienungsanleitung

Beliebte Badezimmerarmatur Handbücher anderer Marken

DURAVIT

DURAVIT C.1 C15240 0090 Handbuch

Heatstore

Heatstore HSTRL500WTN Bedienungsanleitung

Sunshower

Sunshower PURE SOLO Bedienungsanleitung

Delabie

Delabie Delabie Sporting 714700 Bedienungsanleitung

Kohler

Kohler K-13056 Montageanleitung

ESS

ESS Container TCL-11 Bedienungsanleitung

Mustee

Mustee 22C Bedienungsanleitung

VITRA

VITRA V-Flow Bedienungsanleitung

baliv

baliv DUK-80.30 T Bedienungsanleitung

Malmet

Malmet B105BT Bedienungsanleitung

bathstore

bathstore Transition H1690MM Leitfaden

BELLOSTA

BELLOSTA Edward 0800/M Bedienungsanleitung

baliv

baliv DU-5160 Bedienungsanleitung

Gessi

Gessi RILIEVO 59011 Bedienungsanleitung

noken

noken VITAE 100188525-N299998810 Bedienungsanleitung

Allen + Roth

Allen + Roth 1142VA-30-201 Bedienungsanleitung

Britex

Britex HBDA Bedienungsanleitung

GRE

GRE DSALC32W Bedienungsanleitung