FRC TH6 Montageanleitung

TH6 Hybrid

6-Camera System

Document Number:

XE-SNB2-TH6PM-R0A

Installation and Setup Guide

Document Number: XE-SNB2-TH6PM-R0A

p. 2

TH6 Installation and Setup Guide

— this page intentionally left blank —

Document Number: XE-SNB2-TH6PM-R0A

p. 3

TH6 Installation and Setup Guide Contents

Section 1 — Installation pg. 5

Installing the DVR

Installing the Signals Harness

Installing the Expansion Harness

Installing the SD Card

Hardware Installation Checklist

Firmware Updates

Copying DVR Conguration

Section 2 — Operation pg. 17

DVR Front Panel Features

DVR Back Panel Features

Video System Status

Tagging Video for Review

Accessing On-screen Display

Using On-screen Keyboards

Working with Video

Health Check

Section 3 — Basic Conguration

pg. 31

Setting Up the DVR

Time/Date Menu

Title/Display Menu

Camera Settings

Signals

Alarms

Section 4 — Advanced

Conguration pg. 45

Recording Settings

Network Settings

Advanced Network Settings

VMS Servers

G Sensor

Speed Settings

GPS Fencing

User Levels

System Settings

Program Update

Monitor Settings

Wake on Input, Digital Output

Contents

Document Number: XE-SNB2-TH6PM-R0A

p. 4

TH6 Installation and Setup Guide Introduction

Introduction

This Guide provides the following information for Installers, System Technicians, and Vehicle Operators working with

the TH6 DVR system:

Installers

Explore the TH6 DVR system components, physical and electrical installation, and system-level settings, including

camera and DVR conguration. You'll also learn to test system functionality and interoperability with other

equipment, how to clone DVR conguration, and performing rmware updates.

System Technicians

Help troubleshoot and maintain the mobile surveillance system using a monitor plugged into the DVR front panel,

remove and replace hard drives, access video, and set up cameras and recording options.

Note: on-screen conguration and video playback requires a portable video monitor and a USB mouse.

Vehicle Operators

Learn how to ag an event so incident video can be easily located, and understand the system status indicator, so

you'll know when the DVR is recording.

DVR systems must be installed by a professional installer with the appropriate experience and equipment.

NOTE: Professional Installation

Document Number: XE-SNB2-TH6PM-R0A

p. 5

TH6 Installation and Setup Guide Installation

Installation

Installing the DVR........................................................................................................... 6

Tools and Equipment ...............................................................................................................6

Physical Location.....................................................................................................................6

Installation Requirements ........................................................................................................7

Physical Installation .................................................................................................................7

Installing the Signals Harness ....................................................................................... 9

Installing the Expansion Harness (optional).............................................................. 10

Installing the SD Card (optional).................................................................................11

Hardware Installation Checklist ................................................................................... 12

Firmware Updates........................................................................................................ 13

Firmware Version...................................................................................................................13

To install a rmware update: ..................................................................................................13

Copying DVR Conguration ........................................................................................ 14

Copying DVR Settings...........................................................................................................14

Applying DVR Settings ..........................................................................................................15

Document Number: XE-SNB2-TH6PM-R0A

p. 6

TH6 Installation and Setup Guide Installing the DVR

Installing the DVR

Tools and Equipment

The DVR system must be installed by a professional installer. A professional installer has the experience and

equipment to install and congure this DVR system to run properly.

Check that you have all the system components and inspect the units for any scratches or damage before installing.

Keys included in package contents:

• DVR keys for securing the removable hard drive

• Front cover keys for securing the removable front cover

Conguration equipment:

For on-screen conguration: portable video monitor and mouse

• For vMax Web conguration: laptop and an Ethernet cable

Physical Location

The DVR is secured with a security front cover and a cable cover. The cable cover allows wiring to enter from the

underside of the back of the unit.

The DVR is designed for horizontal installation, on top of the mounting plate (see the diagram on page 8), but

may be installed vertically if required. Do NOT install the DVR upside down.

WARNING: Risk of Heat or Moisture Damage

Do not install the DVR in a location where the unit is exposed to excessive heat or moisture.

Installation close to extreme heat or moisture voids the product warranty.

Route wiring and cables away from sharp edges that might damage the insulation. Avoid sharp bends in the

cable.

Contact Technical Support before attaching the DVR to other equipment in the vehicle.

Before installing the DVR, keep in mind that a well-ventilated location and sufcient clearance around the unit are key

factors for performance and maintainability. The following table provides information on installation requirements.

Document Number: XE-SNB2-TH6PM-R0A

p. 7

TH6 Installation and Setup Guide Installing the DVR

Installation Requirements

1. Select an appropriate mounting location and

orientation (horizontal or vertical).

2. Insert a hard drive in the DVR.

3. Insert the key into the hard drive lock and rotate a

quarter turn to lock the drive.

WARNING: Safety and Electrical Systems

It is your responsibility to avoid damaging safety or electrical systems.

Ventilated

Location

Install the DVR away from any sort of heat outlet, heater, or AC blower. Do not operate the DVR

in a closed-in area or restrict ventilation in any way. The DVR requires air circulation to maintain

optimum operation temperature and provide best performance. Do not expose the DVR to

moisture.

Mount to

secure

surfaces

only

Do not mount the DVR to a plastic panel or other surface that is subject to constant vibration.

Mounting

orientation

We strongly recommend mounting the DVR in a horizontal orientation (on top of the mounting tray);

however, to accommodate space restrictions, vertical mounting is acceptable. Do NOT install the

DVR upside-down.

Clearance

around the

DVR

Allow sufcient clearance of at least six (6) inches in front of the DVR and two (2) inches to each

side for removal of the security front cover and easy access to the hard drive and USB ports. Allow

sufcient clearance behind the DVR for camera cables, mounting cables, Ethernet cables, and

power cables.

Mounting

cables

The radius for the mounting cables will be dictated by the cable cover. The rearmost surface of the

cable cover will be about 3 inches from the back of the DVR to allow camera cables to bend over

each other.

Ethernet

cables Avoid right angle bends in the Ethernet cables.

Power

cables

Provide enough slack on the power cable to prevent any force from being exerted on the

connectors. A single 4-inch diameter loop is sufcient.

Physical Installation

The DVR typically ships with the locking front cover, mounting plate, and cable cover off, but in the shipping box.

The hard disk drive is in a separate box in the system shipping kit.

To install the DVR:

Document Number: XE-SNB2-TH6PM-R0A

p. 8

TH6 Installation and Setup Guide Installing the DVR

4. Use the mounting plate to mark the desired position

of the DVR and drill the four mounting holes.

5. Fasten the mounting plate to the mounting surface

with the four self-drilling screws.

6. Slide the rear bottom edge of the DVR into the

spring tab on the back edge of the mounting tray.

7. Attach the front bottom edge to the front of the

DVR using the two pan-head Phillips screws.

8. Connect the necessary cables and components.

For more information, see "DVR Front Panel

Features" on page 18 and "DVR Back Panel

Features" on page 19.

9. Attach the cable cover to the DVR using the thumb

screws provided.

10. When DVR installation is complete, attach the front

door by hooking the door along the top edge and

turning the key to the locked position.

Document Number: XE-SNB2-TH6PM-R0A

p. 9

TH6 Installation and Setup Guide Installing the Signals Harness

Installing the Signals Harness

About

This topic describes installing the Signals Harness, which connects the DVR to Signal inputs, and to the optional

Event/Diagnostic button and Wake on Input trigger: for more information on each of these features see:

• "Signals" on page 41

• "Tagging Video for Review" on page 22

• "Wake on Input, Digital Output" on page 68

Before you begin...

It is your responsibility to avoid damaging safety or electrical systems.

Ensure you read and understand "Installation Requirements" on page 7.

To install the Signals Harness

Connect the 2x6 Microt to the SIGNALS

socket on the DVR.

• Connect the 5 signal input wires, as

shown in the in the Installation Diagram

in the TH6 Quick Install Guide on the

inView Guardian product page.

• Connect the 1x5 Microt to the Adapter

harness for the Event/Diagnostic button

(optional).

• Remove the 1x3 Microt and connect

the green and black wires to a Wake on

Input trigger (optional) as shown in the

Installation Diagram in the TH6 Quick

Install Guide on the inView Guardian

product page.

The Signals harness is Part # WT1.

To DVR SIGNALS socket

(2 x 6)

To Wake on Input

trigger - optional

(1 x 3)

To Event/Diagnostic

button - optional

(1 x 5)

To Signal

inputs (5 wires)

Document Number: XE-SNB2-TH6PM-R0A

p. 10

TH6 Installation and Setup Guide Installing the Expansion Harness (optional)

Installing the Expansion Harness (optional)

About

This topic describes installing the optional Expansion Harness, which can connect the DVR to Student Tracking

and Rear Vision systems, and provides a digital output to trigger other devices when an Alarm is detected (for more

information, see "Alarms" on page 43.

Before you begin...

It is your responsibility to avoid damaging safety or electrical systems.

Ensure you read and understand "Installation Requirements" on page 7.

To install the Expansion Harness

Connect the 2x4 Microt connector to the

EXPANSION socket on the DVR.

• Connect the 4-pin to the Student

Tracking harness (optional).

• Connect the 2-pin to the Rear Vision

System harness (optional).

• Connect the Digital Out black and

blue wires (optional) as shown in the

Installation Diagram in the TH6 Quick

Install Guide on the inView Guardian

product page.

The Expansion Harness is Part #060-1059

Inhaltsverzeichnis

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung